Surface modification of biodegradable plastics by ion beams

Biodegradable plastics can be used as conventional plastics, while on disposal they decompose to water and carbon dioxide by microorganisms existing in natural environment. Products using biodegradable plastics have recently been developed in many companies pursuing ecology. In this study, surface modification of biodegradable plastics was carried out by inert ion beams for improvement of photo deterioration under an ultraviolet ray. The hardness of biodegradable plastics tended generally to decrease with irradiation of an ultraviolet ray. In this method, the hardness of ion-bombarded biodegradable plastics was kept at an initial value under an ultraviolet ray, because the modified layer by ion bombardment intercepted an ultraviolet ray. The hardness of He⁺ ion-bombarded biodegradable plastics showed larger value than that of Ar⁺ ion bombardment. He⁺ ion bombardment at ion energy of 10 keV produced the suitable property with both of high transmittance of a visible ray and high interception of an ultraviolet ray in a surface layer of biodegradable plastics.     

Tunable Optical Notch Filter Realized by Shifting the Photonic Bandgap in a Silicon Photonic Crystal Line-Defect Waveguide

A tunable optical notch filter was realized by thermally shifting the TM-like (the light's electric field perpendicular to the substrate) bandgap of a silicon photonic crystal slab W1 line-defect waveguide with silica cladding. This device is compact-its footprint is 340times16 mum², excluding the electrode pads. The 3-dB bandwidth of the device was about 5 nm, and the extinction ratio at the center wavelength was as high as 40 dB. A maximum center wavelength shift of 17.9 nm was attained at a heating power of 0.7W, with a tuning efficiency of 25.5 nm/W. The tuning response time was less than 100 mus     

Pressure wave propagation in air-water bubbly and slug flow

Related to nuclear reactor safety problems, such as the loss of coolant accident caused by some small crevasses in nuclear reactor, choked flows after postulated breaks of hot and cold legs of pressurized water reactors and the boiling flow instability in parallel channels, the characteristics of pressure wave propagation were investigated experimentally for the air-water bubbly and slug two-phase flow in a vertical pipe. Pressure wave was generated from the small pressure disturbance by the up-and-down movement of piston in the test section. Air void fraction was up to 0.7 and superficial liquid velocity was up to 1.5 m/s as experimental conditions. The experimental results show that the pressure wave propagation velocity in bubbly flow decreases acutely with the increase of air void fraction from 0 to 0.05. In slug flow, it is constant when the air void fraction is less than 0.5 but increases gradually when the void fraction increases beyond 0.5. The attenuation coefficient of pressure wave increases with the increase of air void fraction in bubbly flow. The dependency of pressure wave propagation velocity on angle frequency ω in air-water flow shows the dispersion characteristic. The propagation velocity and attenuation coefficient increases gradually with the increase of angle frequency. However, the increase vanishes slowly as the angle frequency reaches 250 Hz in bubbly flow. The propagation of pressure wave in bubbly flow is independent of the superficial velocity of fluids in the range of experiment.     

Kinetics of reactive diffusion between Au and Sn during annealing at solid-state temperatures

The reactive diffusion between Au and Sn was experimentally studied at solid-state temperatures using Sn/Au/Sn diffusion couples prepared by a diffusion bonding technique. The diffusion couples were annealed at temperatures of T = 393 and 473 K for various times in an oil bath with silicone oil. After annealing, compound layers composed of AuSn₄, AuSn₂ and AuSn were recognized to form at the Au/Sn interface. The thickness of the AuSn₄ layer is about six and four times greater than those of the AuSn₂ and AuSn layers at T = 393 and 473 K, respectively. The ratio of the thicknesses of the compound layers is kept constant independently of the annealing time. The total thickness l of the compound layers is described as a function of the annealing time t by the equation l = k(t/t₀)ⁿ, where t₀ is unit time, 1 s. The exponent n is nearly equal to 1/2 at T = 393 K but takes a value between 1/4 and 1/2 at T = 473 K. Such an intermediate value of n at T = 473 K indicates that the grain boundary diffusion contributes to the reactive diffusion and the grain growth occurs at certain rates. As the annealing temperature decreases, the contribution of the grain boundary diffusion should become more remarkable, but the grain growth will slow down. Consequently, n becomes close to 1/2 at T = 393 K. According to the constancy of the ratio of the thicknesses, it is concluded that the same rate-controlling process works in the AuSn₄, AuSn₂ and AuSn layers at a constant annealing temperature.     

三水铝石的粉碎机械力化学效就与热特性

使用振动球磨机将三水铝石粉体进行干式微粉碎.粉碎实验条件为介质球/试样(质量比)=8.5.研究调查了不同粉碎时间处理粉碎试样的机械力化学效应(平均粒径、结晶无定形和加热特性).结果表明,长时间粉碎,达到粉碎平衡,平均粒径趋于极限值.粉碎过程中未脱水.由于粉碎,加热脱水温度、结晶相变温度降低.     

High‐luminance 1‐m‐long plasma tubes for wall displays

Abstract— The plasma‐tube array is expected to realize a wall‐sized display. This method will realize an emissive‐type display with a flexible screen shape and an expandable screen size. The shape of the plasma tube was investigated to realize high luminance, high luminance efficacy, and high flexural strength. As the result, a cylindroid tube is proposed to satisfy these demands. An experimental display of 1 m × 128 mm has been developed with these cylindroid tubes and it demonstrated a high luminous efficacy of 3.1 lm/W.     

A novel bistable reflective display using quick‐response liquid powder

Abstract— We have developed new powder materials that exhibit liquid behavior, which can lead to the realization of novel bistable and reflective displays having paper‐white appearance, high contrast, and quick response. Two types of display were demonstrated, one had 160 × 160 array of pixels and the other had 320 × 320 in a 3.1‐in.‐diagonal viewable image size corresponding to 66 and 132 dpi, respectively. These displays were driven by passive‐matrix addressing. The displays showed a reflectivity of more than 41%, a contrast more than 1:10, and a pixel response time of less than 0.2 msec. The seven‐segment display for use in clocks was also demonstrated.     

Glasslike Transitions in Thin Polymer-Melt Films Due to Thickness Constraint

The shear properties of thin films of star and linear polyisoprene (PIP) melts under high pressure were investigated as a function of sliding velocity (shear rate) using the surface forces apparatus. The results were contrasted with their bulk rheological properties; effects of thickness constraint on the shear behavior were discussed. The melts of PIP in bulk exhibit Newtonian-like constant viscosity at least at low shear rates (frequencies), which suggests that individual molecules flow with lateral sliding motion. However, thin films of PIP melts show tribological features involving apparent shear-thinning behavior, indicative of the correlated motions in confined geometries. The shear-property change from bulk rheological behavior to thin-film tribological behavior along with the thickness decrease reflects the physical states and their transitions in the systems; the thickness constraint induces glasslike transitions. Effects of molecular weights and molecular architecture (star-branched or linear) on the shear properties are also discussed.