LD7铝合金时效工艺的研究

通过试验系统地研究了ＬＤ７铝合金的单级和两级时效工艺。结果表明，与传统的单级时效相比，两级时效在不降低室温强度，硬度的前提下，可显著提高合金的电导率及高温性能。     

A spectroscopic study of the self-association and inter-molecular aggregation behaviour of pH-responsive poly(l-lysine iso-phthalamide)

The pH mediated intra-molecular association and inter-molecular aggregation of a range of amphiphilic poly(l-lysine iso-phthalamide) polymers have been investigated in aqueous solution over a range of pH values and concentrations. The desired functionality of these novel bioresponsive amphiphilic polymers was achieved by incorporating pendant hydrophilic carboxyl groups along the polymer backbone, via the l-lysine moiety, balanced by a degree of hydrophobicity introduced via the iso-phthaloyl moiety. Incorporation of low levels of bis-functional Cy3 (poly-Cy3) and/or Cy5 dye (poly-Cy3/5 or poly-Cy5) co-monomers in the responsive polymer backbone allowed detailed probing of the pH mediated hydrophobic association using a combination of optical spectroscopic techniques. Both steady-state fluorescence spectroscopy and fluorescence lifetime measurements of poly-Cy3 revealed a conformational transition at pH 4.5. Thus, below a critical pH the polymer collapsed into a compact globular structure (hypercoil) bringing the fluorophore molecules into close proximity with one another. This resulted in a dramatic reduction in fluorescence intensity and fluorescent lifetime in the single fluorophore systems (poly-Cy3) accompanied by a red shift in the maximum emission wavelength. Observed redshifts in the emission maxima and enhancements of fluorescent lifetimes with increasing polymer concentration suggested the formation of polymer aggregates. Fluorescence resonance energy transfer (FRET) was measured in mixtures of single fluorophore containing poly-Cy3 (donor) and poly-Cy5 (acceptor) and dual fluorophore containing poly-Cy3 (donor)/Cy5 (acceptor) in an effort to distinguish between intra-molecular versus inter-molecular association. The relevance of the results with respect to potential in vivo applications (drug delivery and biodiagnostics) is discussed.     

煤的荧光特性与其工艺性能的关系研究

简述了煤中镜质组荧光产生的机理及荧光参数的测量方法,通过测定一系列煤的粘结性和10kg小焦炉结焦性试验,探讨了煤的荧光特性与其工艺性能的关系。煤的荧光参数与其反射率呈正的线性相关关系,与其挥发分含量呈负的线性相关关系;煤的粘结性、结焦性均与其荧光参数有关;当煤化程度相同、煤岩组成基本相同时,煤的荧光强度愈强,其结焦性能愈好。     

催化剂烧炭再生模拟和分析

催化剂烧炭再生是非定态过程。本文建立了绝热反应器内催化剂烧炭模型,利用移动边界正交配置法求解。以结炭的BO2催化剂再生为工作反应,模拟预测与实验值吻合良好。模拟计算表明,用递升进口温度序列烧炭,使再生时间明显缩短。     

An Experimental Study of Fatigue Strength for Adhesively Bonded Tubular Single Lap Joints

In this paper, manufacturing technology of the tubular single lap adhesive joint was studied to obtain reliable and optimal joint quality. In addition, a surface preparation method and a bonding process for the joint were devised. The effect of the adhesive thickness and the adherend roughness on the fatigue strength of the joint was experimentally investigated. From experiments, it has been found that the fatigue strength of the joint increased as the adhesive thickness decreased and the optimal arithmetic surface roughness of the adherends was about 2 μm.     

热处理前后丙烯腈／溴乙烯共聚纤维的热性能和阻燃性能研究

分析了热处理前后丙烯腈／溴乙烯共聚纤维的热性能与溴乙烯含量、升温速率或热处理时间的关系，并对纤维的阻燃性与溴含量或热处理时间关系进行了研究。结果表明，溴含量的增加或热处理时间的延长对热稳定性和阻燃性的提高有较大影响，而且经热处理后纤维的阻燃性与溴无关。     

MACD与K线图技术在证券投机中的实证研究

利用MACD趋势指标与K线形态图进行相互验证技术,改进一般的基于MACD的证券买卖准则。实证结果表明,基于改进后的MACD买卖准则进行证券投机,几乎能使投机者捕捉到每一波段行情,从而获取较高收益。     

A novel ADRC‑based design for a kind of fexible aerocraft

The paper presents a novel control design, which is based on the idea of active disturbance rejection control (ADRC), for a kind of fexible aerocraft whose controlled variable cannot be measured directly. Since the original frame of ADRC cannot be directly applied, the paper puts forward a new extended state observer (ESO) and the corresponding ADRC law. In order to assign the poles of the closed-loop system to ideal positions such that the vibration can be quickly suppressed, an elastic damping term is added into feedback law. The advantages of the new ESO for efectively estimating both the rigid mode and elastic mode from the measurements are discussed. Moreover, the analysis on the stability, the relative stability and the steady state of the closed-loop system is given. Finally, the efectiveness and robustness of the proposed ADRC are verifed by simulations.     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.