Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Economical treatment of reverse osmosis reject of textile industry effluent by electrodialysis–evaporation integrated process

Membrane separation methods such as electrodialysis (ED) can reduce the volume load on evaporators by facilitating further concentration of rejects from reverse osmosis (RO) plants. ED studies were carried out on a bench-scale system using five membrane cell pairs to obtain a textile effluent concentrate containing approximately 6 times the quantity of salts present in the RO reject. The limiting current densities were determined to be in the range 2.15–3.35 amp/m² for feed flow rates varying from 18 to 108 L/h. Apart from feed rate, the influence of volume of concentrate and current on membrane performance was evaluated to optimize current utilization. An estimation of energy requirement of an integrated process constituting ED and evaporation for concentration of inorganics present in textile effluent from 4.35% to 24% was made and found to be approximately one eighth of the operating cost incurred by evaporation alone. Detailed design of a commercial ED system revealed that a membrane area of 13.1 m² was required to treat a feed rate of 1500 L/h. The payback period to recover capital investment was found to be 110 days.     

Morphological Forms of α-Alumina Particles Synthesized in 1,4-Butanediol Solution

Phase-pure, monodispersed, hexagonal plates of single-crystal α-alumina (∼ 2 μm wide and ∼0.5 μm thick) have been prepared via precipitation by treating an aluminum hydrous oxide precursor in 1,4-butanediol at 300°C under autogenous vapor pressure. Present work shows that KOH is the only reagent that precipitates an aluminum hydrous oxide precursor suitable to synthesize α-alumina in 1,4-butanediol solution. In contrast, the use of NaOH or NH₄OH as the precipitating reagent for the precursor material does not yield the alpha phase. The solution pH at which the precursor materials are precipitated is also a critical factor for the formation of α-Al₂O₃. Phase-pure α-alumina powders were also only synthesized from the aluminum hydrous oxide precursors precipitated in the pH range from 10 to 10.5. The results of X-ray diffraction and scanning electron microscopy indicate that longer reaction times promote the phase transformation from the intermediate boehmite phase to α-alumina. The complete transformation from boehmite to α-alumina requires reaction times of about 12 h.     

Moisture diffusion through (hexadecyltrimethylammonium bromide ‐ Indian bentonite)/(vinylester) nanocomposites in artificial seawater and demineralized water

This paper compares the moisture diffusion properties of organomodified (Indian Bentonite nanoclay)/vinylester containing different amounts of nanoclay on exposure to demineralized water and artificial seawater at room temperature. Moisture uptake behavior of (Indian Bentonite)/vinylester was investigated and compared with that of neat vinylester. Addition of 5 wt% nanoclay decreased the diffusivity and permeability of vinylester in artificial seawater medium, but these diffusion parameters increased in demineralized water medium. Degradation in glass transition temperature and microhardness of the nanocomposites were much greater in specimens aged in demineralized water than in those in artificial seawater medium. Moisture diffusion behavior of the specimens was analyzed by Fick's law and the Langmuir model. The aged specimens were chemically analyzed by using infrared spectroscopy after aging for 146 days. A significant amount of leached organic species was detected in the demineralized water–aged specimens but the same was absent in those aged in artificial seawater. J. VINYL ADDIT. TECHNOL., 22:441–451, 2016. © 2015 Society of Plastics Engineers     

Quaternized poly(phenylene oxide) anion exchange membrane for alkaline direct methanol fuel cells in KOH‐free media

A series of anion exchange membrane (AEM) electrolytes with quaternary ammonium moiety are fabricated from poly (phenylene oxide) for its application in alkaline direct methanol fuel cells (ADMFCs). In the first step, poly(phenylene oxide) (PPO) is successfully chloromethylated by substituting chloromethyl groups in the aryl position of polymer. In the second step, the chloromethylated PPO (CPPO) is further homogeneously quaternized and ion‐exchanged to form an AEM. From the second step, series of AEMs are prepared by changing the mole ratio of amine in relation to CPPO. The presence of quaternary ammonium group in the membrane was confirmed by elemental analysis. The fabricated membranes are subjected to cell polarization studies in ADMFCs, wherein quaternized poly(2,6‐dimethyl‐1,4‐phenylene oxide) (CPPO:amine of 1:8) membrane exhibits higher peak power density of 3.5 mW cm^?2 when compared with the other ratios of CPPO:amine in the absence of KOH solution. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43693.     

Synthetic Applications of Carbohydrate-derived Donor-Acceptor Cyclopropanes

In this account, we elaborate our group's contribution towards understanding the chemistry of carbohydrate-derived donor-acceptor (DA) cyclopropanes. Our work was mainly focused on the ring opening of these versatile chiral synthons under the influence of Lewis acid promoters like electrophilic halogen species, TMSOTf, BF₃.OEt₂, etc. We studied various modes of ring opening on these DA cyclopropanes, envisaging the access to intriguing molecular architectures. These modes of reaction of the DA cyclopropanes can be controlled by strategically introducing an electron-withdrawing group (EWG) onto the cyclopropane ring, which could direct the ring cleavage by polarizing the cyclopropane C−C bond. Our studies also revealed that the ring opening is sluggish in the absence of an EWG. Using this concept, we demonstrated the synthesis of various biologically interesting molecular skeletons, viz., glycoamino acids (GAA), GAA nucleotides, α-levoglucosan amino acid, and septano-oligosaccharides, with high selectivity. We also applied our understanding to the first stereoselective synthesis of (S)-(−)-longianone and confirmed its absolute configuration. Apart from the inherently activated DA cyclopropanes, we introduced the in situ generation of DA cyclopropanes, starting from vinylcyclopropanes (VCPs). The ring-opening and ring-expansion chemistry of these easily accessible synthons was studied. The chemistry developed for carbohydrate-fused cyclopropanes was also applied for carbohydrate-derived spiro-cyclopropanes. The Lewis-acid-mediated ring opening of spiro-DA-cyclopropanes enabled easy access to fused furopyrans and spirolactones.     

Recent Advances in Hierarchical Reinforcement Learning

Reinforcement learning is bedeviled by the curse of dimensionality: the number of parameters to be learned grows exponentially with the size of any compact encoding of a state. Recent attempts to combat the curse of dimensionality have turned to principled ways of exploiting temporal abstraction, where decisions are not required at each step, but rather invoke the execution of temporally-extended activities which follow their own policies until termination. This leads naturally to hierarchical control architectures and associated learning algorithms. We review several approaches to temporal abstraction and hierarchical organization that machine learning researchers have recently developed. Common to these approaches is a reliance on the theory of semi-Markov decision processes, which we emphasize in our review. We then discuss extensions of these ideas to concurrent activities, multiagent coordination, and hierarchical memory for addressing partial observability. Concluding remarks address open challenges facing the further development of reinforcement learning in a hierarchical setting.     

Design space exploration for real-time embedded stream processors

We explore tradeoffs between organization and number of ALUs and clock frequency in a stream processor. The tool provides candidate low-power configurations and estimates of their real-time performance. The tool relates instruction-level, subword, and data parallelism to functional units' organization and utilization. The exploration methodology is applicable to all embedded-processor designs in signal and media processing.     

Can Agile and Traditional Systems Development Approaches Coexist? An Ambidextrous View

Emerging evidence seems to indicate that most systems development organizations are attempting to utilize both agile and traditional approaches. This study aims to understand the reasons organizations feel the need for this unlikely juxtaposition and the organizational challenges in sustaining the opposing cultures. Drawing on the extensive literature in organizational theory and management, we advocate ambidexterity as a viable solution to systems development organizations attempting to harness the benefits of both agile and traditional development.