An authenticated re‐encryption scheme for secure file transfer in named data networks

With the fast progress of the Internet and communication technologies, the digital communication is increasingly based on the architecture of TCP/IP. Nevertheless, in TCP/IP's architecture, there are limitations such as data uncertainty and flow overloading. In response to this, a novel architecture has been proposed, which is known as the named data network (NDN). Named data network is an alternative network architecture based on the data each user accesses. Users gain accesses to the data by using an adjacent router (node) that verifies the correctness of the data. In NDN, the router has the capability to store and search for the data. Hence, this architecture largely improves the disadvantages in TCP/IP's architecture. Named data network is a new proposal and relatively under‐researched now. Thus far, an adequate secure file transfer protocol is still unavailable for NDN. In some cases, files are broken or the source fails to authenticate, which results in the need to discover the owner of the file. Furthermore, we believe that NDN should involve an authentication mechanism in the secure file transfer protocol. In view of the above, this paper presents an authenticated re‐encryption scheme for NDN, which offers sender authentication, data confidentiality, and support for potential receivers. Finally, we also propose a security model for sender authentication and prove that the proposed scheme is secure.     

HeS‐CoP: Heuristic switch‐controller placement scheme for distributed SDN controllers in data center networks

Software‐defined networking (SDN) has been widely researched and used to manage large‐scale networks such as data center networks (DCNs). An early stage of SDN controller experienced low responsiveness, low scalability, and low reliability. To solve these problems, distributed SDN controllers have been proposed. The concept of distributed SDN controllers distributes control messages among multiple SDN controllers. However, distributed SDN controllers must assign a master controller for each networking devices. Most previous studies, however, did not consider the characteristics of DCNs. Thus, they are not suitable to operate in DCNs. In this paper, we propose HeS‐CoP, a heuristic switch‐controller placement scheme for distributed SDN controllers in DCNs. With the control traffic load and CPU load, HeS‐CoP decides when our scheme should be performed in DCNs. To show the feasibility of HeS‐CoP, we designed and implemented an orchestrator that contains our proposed scheme and then evaluated our proposed scheme. As a result, our proposed scheme well distributes the control traffic load, decreases the average CPU load, and reduces the packet delay.     

Assembly of Nanoparticle Patterns with Single‐Particle Resolution Using DNA‐Mediated Charge Trapping Technique: Method and Applications

We report a unique approach for producing one‐dimensional gold‐nanoparticle patterns with single‐particle resolution in which the linewidth is only limited by the particle size. In this approach, a focused electron beam was first utilized to generate a positive charge layer on a SiO₂ surface. Biotinated DNA molecules attracted by these positive charges were subsequently used to grasp Au‐nanoparticles revealing the e‐beam exposure patterns. Due to repulsive force between Au colloidal particles, the particles in the single‐line patterns were orderly separated. We further show that the single‐line patterns hold potential in nano‐photonics and nano‐electronics. For the latter, we demonstrate that the line patterns can serve as a template for conductive nanowires of high or low resistance. While low resistance wires showed linear current–voltage characteristics with an extremely high maximum allowed current density, the high resistance wires exhibited charging effect with clear Coulomb oscillation behavior at low temperatures. This demonstrates that the technique is capable of producing interconnects as well as single‐electron‐transistors, and opens up possibilities for fabrication of integrated circuits.     

Chalcogenide Glasses Based on Germanium Disulfide for Second Harmonic Generation

High second‐order susceptibilities are created by thermal poling in bulk germanium disulfide based chalcogenide glasses. Experimental conditions of the poling treatment (temperature, voltage, time) were optimized for each glass composition. The second‐order nonlinear signals were recorded by using the Maker fringes experiment and a second‐order coefficient χ⁽²⁾ up to 8 pm V^–1 was measured in the Ge₂₅Sb₁₀S₆₅ glass. This value is obtained using a simulation based on accurate knowledge of the thickness of the nonlinear layer. Two mechanisms are proposed to explain the creation of a nonlinear layer under the anode: the formation and the migration of charged defects towards the anode may mainly occur in Ge₂₀Ga₅Sb₁₀S₆₅ and Ge₂₅Ga₅S₇₀ glasses, whereas the migration of Na⁺ ions towards the cathode may be responsible for the accumulation of negative charges under the anode in Ge₃₃S₆₇ and Ge₂₅Sb₁₀S₆₅ glasses. Different electronic conductivity behaviors seem to be at the origin of the phenomenon. In parallel, the potential effect of the poling treatment on the structural and electronic properties is studied using Raman spectroscopy and secondary ion mass spectroscopy measurements.     

TD‐CFIE Formulation for Transient Electromagnetic Scattering from 3‐D Dielectric Objects

In this paper, we present a time domain combined field integral equation formulation (TD‐CFIE) to analyze the transient electromagnetic response from dielectric objects. The solution method is based on the method of moments which involves separate spatial and temporal testing procedures. A set of the RWG functions is used for spatial expansion of the equivalent electric and magnetic current densities, and a combination of RWG and its orthogonal component is used for spatial testing. The time domain unknowns are approximated by a set of orthonormal basis functions derived from the Laguerre polynomials. These basis functions are also used for temporal testing. Use of this temporal expansion function characterizing the time variable makes it possible to handle the time derivative terms in the integral equation and decouples the space‐time continuum in an analytic fashion. Numerical results computed by the proposed formulation are compared with the solutions of the frequency domain combined field integral equation.     

An Experimental 0.8 V 256‐kbit SRAM Macro with Boosted Cell Array Scheme

This work presents a low‐voltage static random access memory (SRAM) technique based on a dual‐boosted cell array. For each read/write cycle, the wordline and cell power node of selected SRAM cells are boosted into two different voltage levels. This technique enhances the read static noise margin to a sufficient level without an increase in cell size. It also improves the SRAM circuit speed due to an increase in the cell read‐out current. A 0.18 µm CMOS 256‐kbit SRAM macro is fabricated with the proposed technique, which demonstrates 0.8 V operation with 50 MHz while consuming 65 µW/MHz. It also demonstrates an 87% bit error rate reduction while operating with a 43% higher clock frequency compared with that of conventional SRAM.     

Multifunctional Core/Shell Nanoparticles Self‐Assembled from pH‐Induced Thermosensitive Polymers for Targeted Intracellular Anticancer Drug Delivery

Core/shell nanoparticles that display a pH‐sensitive thermal response, self‐assembled from the amphiphilic tercopolymer, poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide‐co‐10‐undecenoic acid) (P(NIPAAm‐co‐DMAAm‐co‐UA)), have recently been reported. In this study, folic acid is conjugated to the hydrophilic segment of the polymer through the free amine group (for targeting cancer cells that overexpress folate receptors) and cholesterol is grafted to the hydrophobic segment of the polymer. This polymer also self‐assembles into core/shell nanoparticles that exhibit pH‐induced temperature sensitivity, but they possess a more stable hydrophobic core than the original polymer P(NIPAAm‐co‐DMAAm‐co‐UA) and a shell containing folate molecules. An anticancer drug, doxorubicin (DOX), is encapsulated into the nanoparticles. DOX release is also pH‐dependent. DOX molecules delivered by P(NIPAAm‐co‐DMAAm‐co‐UA) and folate‐conjugated P(NIPAAm‐co‐DMAAm‐co‐UA)‐g‐cholesterol nanoparticles enter the nucleus more rapidly than those transported by P(NIPAAm‐co‐DMAAm)‐b‐poly(lactide‐co‐glycolide) nanoparticles, which are not pH sensitive. More importantly, these nanoparticles can recognize folate‐receptor‐expressing cancer cells. Compared to the nanoparticles without folate, the DOX‐loaded nanoparticles with folate yield a greater cellular uptake because of the folate‐receptor‐mediated endocytosis process, and, thus, higher cytotoxicity results. These multifunctional polymer core/shell nanoparticles may make a promising carrier to target drugs to cancer cells and release the drug molecules to the cytoplasm inside the cells.     

QoS‐aware routing and power control algorithm for multimedia service over multi‐hop mobile ad hoc network

This paper presents a QoS (quality of service) aware routing and power control algorithm consuming low transmission power for multimedia service over mobile ad hoc network. Generally, multimedia services need stringent QoS over the network. However, it is not easy to guarantee the QoS over mobile ad hoc network since its network resources are very limited and time‐varying. Furthermore, only a limited amount of power is available at mobile nodes, which makes the problem more challenging. We propose an effective routing and power control algorithm for multimedia services that satisfies end‐to‐end delay constraint with low transmission power consumption. The proposed algorithm supports the required bandwidth by controlling each link channel quality over route in a tolerable range. In addition, a simple but effective route maintenance mechanism is implemented to avoid link failures that may significantly degrade streaming video quality. Finally, performance comparison with existing algorithms is presented in respect to traditional routing performance metrics, and an achievable video quality comparison is provided to demonstrate the superiority of the proposed algorithm for multimedia services over mobile ad hoc network. Copyright © 2010 John Wiley & Sons, Ltd.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.     

Complexity reduction of signal detection by exploiting correlation characteristics of spreading sequences

In this paper, we propose an approach to reduce the multi‐user detection (MUD) complexity based on user grouping and signal replica classification by exploiting the correlation characteristics of spreading sequences in multipath fading channels. The spreading sequences are constructed from inter‐group complementary codes with a sparse and regular correlation matrix and inherit its attractive auto/cross‐correlation properties. Users are first partitioned into independent user groups according to whether or not there is interference among them, and then the replicas of user signals from the same user group are further classified into independent replica classes. The MUD is carried out within each low‐dimensional user group or replica class, respectively, reducing the MUD complexity substantially. This approach can be applied to most of the existing MUD algorithms for complexity reduction, and in this paper optimal MUD and multi‐stage MUD are exemplified. The analytical and simulated results demonstrate that this approach can reduce the MUD complexity significantly under any load conditions without performance loss. Copyright © 2009 John Wiley & Sons, Ltd.