Antioxidant activity and phenolic content of phenolic rich fractions obtained from black cumin (Nigella sativa) seedcake

The antioxidant activities of crude methanolic extract (CME) and its fractions using ethyl acetate (EAF), hexane (HF) and water (WF) of black cumin seedcake were investigated. DPPH radical scavenging activity, β-carotene–linoleate bleaching, and inhibition of corn oil oxidation were used to evaluate the antioxidant capacity. The total phenolics were found to be 78.8, 27.8, 32.1 and 12.1 mg gallic acid equivalents (GAE)/g in EAF, CME, WF and HF, respectively. The CME and EAF exhibited the highest DPPH followed by WF and HF. The extract/fractions showed high effect on reducing the oxidation of β-carotene. The effect of extract/fractions on the oxidative stability of corn oil at 70 °C was tested in the dark and compared with butylated hydroxyanisole (BHA). The oil peroxide and anisidine values were generally lower with addition of PRFs in comparison to a control. The predominant phenolic compounds identified by HPLC–DAD in CME and WF of black cumin seedcake were hydroxybenzoic, syringic and p-cumaric acids.     

Hybrid Paper–Plastic Microchip for Flexible and High‐Performance Point‐of‐Care Diagnostics

A low‐cost and easy‐to‐fabricate microchip remains a key challenge for the development of true point‐of‐care (POC) diagnostics. Cellulose paper and plastic are thin, light, flexible, and abundant raw materials, which make them excellent substrates for mass production of POC devices. Herein, a hybrid paper–plastic microchip (PPMC) is developed, which can be used for both single and multiplexed detection of different targets, providing flexibility in the design and fabrication of the microchip. The developed PPMC with printed electronics is evaluated for sensitive and reliable detection of a broad range of targets, such as liver and colon cancer protein biomarkers, intact Zika virus, and human papillomavirus nucleic acid amplicons. The presented approach allows a highly specific detection of the tested targets with detection limits as low as 10² ng mL^?1 for protein biomarkers, 10³ particle per milliliter for virus particles, and 10² copies per microliter for a target nucleic acid. This approach can potentially be considered for the development of inexpensive and stable POC microchip diagnostics and is suitable for the detection of a wide range of microbial infections and cancer biomarkers.     

Polyphenolic composition and in vitro antioxidant activities of native‐ and tannase‐treated green tea extracts

The antioxidant activities of native‐ and tannase‐treated green tea extracts along with their major polyphenol components were investigated. The polyphenolic content and composition of the tea before and after tannase treatment were determined by liquid chromatography coupled with mass spectrometry (LC‐MS). Approximately 99% of the (?)‐epigallocatechin gallate (EGCG) and (?)‐epicatechin gallate (ECG) in green tea extract were converted by tannase to (?)‐epigallocatechin (EGC) and (?)‐epicatechin (EC), respectively, after 30 min. Biotransformed green tea exhibited a significantly higher DPPH˙ radical scavenging activities than native green tea (EC₅₀ value of 0.024 ± 0.001 and 0.044 ± 0.001 mg mL^?1, respectively). Kinetic parameters such as scavenging rate and stoichiometry were calculated. The rate of DPPH˙ radical scavenging activities for tannase‐treated green tea extract was shown to be higher than native green tea extract.     

Resolution of a Five-Component Mixture of Quaternary Ammonium Surfactants on Silica Gel 60 <Emphasis Type="Italic">F</Emphasis><Subscript>254</Subscript> High Performance Thin Layer Chromatographic Plates

The mutual separation of a mixture of cetyltrimethyl ammonium chloride (CTAC), methyl trioctyl ammonium bromide (MTOB), dodecyltrimethyl ammonium chloride (DTAC), benzyltrimethyl ammonium chloride (BTAC) and tetrabutyl ammonium bromide (TBAB), was achieved on silica high performance thin layer chromatographic plates using dimethyl sulfoxide with aqueous sodium-l-tartrate dibasic dihydrate as the solvent system. The effect of concentration of sodium-l-tartrate dibasic dihydrate on the mobility of all the five quaternaries was examined. The limit of detection of CTAC, MTOB, DTAC, BTAC and TBAB was estimated as 0.6, 0.6, 0.3, 0.6 and 0.3 μg/zone, respectively. The method developed was utilized to identify these surfactants in different spiked water samples after their preliminary separation.     

Fully automated runtime enforcement of component-based systems with formal and sound recovery

International Journal on Software Tools for Technology Transfer - We introduce runtime enforcement of specifications on component-based systems (CBS) modeled in the behavior, interaction and...     

Mechanochemical degradation of poly(vinyl fluoride) by sodium hydroxide measured by microindentation

The degradation of the mechanical properties of deformed PVDF during its mechanochemical ageing in sodium hydroxide (soda) was followed by microindentation measurements, especially the local reduction of the elastic modulus and the hardness. This allows measurements on a local scale of the mechanical properties on the surface and in-depth as a function of the strain level and the ageing time. Microindentation tests with Berkovich indenter have been performed with a Nanoindenter XP^® (MTS). Measurements are made at penetration depth less than 2 μm for an applied load of 10 mN. During ageing in soda (Ph 14) at 90 °C up to 16 days, various deformations ε (0, 22 and 38%) are imposed on PVDF tensile specimen. For the first two imposed deformations (ε = 0 and ε = 22%), mechanical degradation is limited to some percent (less than 7%). For the greatest deformation (ε = 38%), mechanical degradation continues to decrease with ageing time (more than 21%). Microindentation tests show that a range of low deformations exists in which the mechanochemical degradation is limited and no limitation is observed for larger imposed deformation.     

A method for computation of surface roughness of digital elevation model terrains via multiscale analysis

In this paper, an algorithm to compute surface roughness of digital elevation model (DEM) terrains via multiscale analysis is proposed. The algorithm employs the lifting scheme to generate multiscale DEMs. At each scale, the areas of pixels that are modified are computed. Granulometric analysis is employed to compute the average area of curvature regions in the terrain, and the average roughness of the terrain due the distribution of curvature regions. The selected case studies of the algorithm implementation demonstrated that the proposed algorithm provides a surface roughness parameter that is realistic with respect to the amplitudes and frequencies of the terrain, invariant with respect to rotation and translation, and has intuitive meaning. The algorithm allows for a good quantification of a region’s convexity/concavity over varying scales, distinguishing between shallow and deep incisions of valleys and ridges of the terrain, and hence, provides an accurate surface roughness parameter.     

Calorimetric Assessment of Rates of Desorption

This paper concerns the further testing of a new double calorimeter. We earlier reported initial development of the calorimeter and thereafter inferred rates coefficients for adsorption of moisture under a “large pressure jump.” (The test materials were silica gel type A and water.) The paper presents a further check on the calorimeter by demonstrating that measured desorption and adsorption rates were compatible. A disappointing aspect was an unintended near step change in condenser pressure at the start of the experiment. The condenser design was deficient, and better drainage is needed in the future to maintain vapor in immediate contact with cold surfaces. Notwithstanding the lower than intended pressure driving force, the heat addition to the silica gel was measurable, following an exponential pattern against time with regression coefficient better than 99%. The rate coefficients that fitted each data set were broadly in line with coefficients reported for adsorption (within the limits of experimental error).