Lipoprotein(a) in android obesity and NIDDM

OBJECTIVE: To assess the level of serum lipoprotein(a) [Lp(a)] in nonobese and obese NIDDM subjects with android body distribution. RESEARCH DESIGN AND METHODS: Serum Lp(a) levels were measured in 30 long-standing NIDDM patients (duration of diabetes 12.5 +/- 3 years, mean +/- SD), with 15 of the patients being obese of android distribution (BMI > 30 kg/m2 and waist-to-hip ratio > 0.8). In addition, there were 15 android obese nondiabetic subjects and 10 healthy subjects serving as the control group. RESULTS: All groups of patients in this study (diabetic, obese, and obese diabetic) showed significantly higher levels of Lp(a) than the healthy control group. Lp(a) concentrations were significantly higher in NIDDM patients with android type of obesity than in nondiabetic androids (24.1 +/- 5.6 vs. 14.8 +/- 2.4 mg/dl, P < 0.001). Significantly greater levels of Lp(a) were found in nonobese subjects with diabetes when compared with obese subjects without diabetes (22.3 +/- 4.1 vs. 14.8 +/- 2.4 mg/dl, P < 0.001). Furthermore, Lp(a) serum concentrations were not dependent on the degree of glycemic control (controlled NIDDM 23.6 +/- 5.0 vs. uncontrolled NIDDM 21.4 +/- 2.7 mg/dl, NS), but were much greater in subjects with diabetes complicated by vascular disease (complicated 26.3 +/- 5.0 vs. uncomplicated 20.5 +/- 2.7 mg/dl, P < 0.001). No correlation was found between Lp(a) and other lipid parameters in this study. CONCLUSIONS: Lp(a) levels are significantly elevated in both android-obese and nonobese NIDDM patients regardless of the degree of glycemic control. Lp(a) is an independent risk factor showing greater elevations in those subjects complicated with diabetic vascular diseases.     

Comparison of alkylglycoside surfactants in enantioseparation by capillary electrophoresis

We examined the biopsy specimens of 62 patients with diabetic nephropathy to establish whether the myofibroblast (MF) has a role in progressive interstitial fibrosis and to ascertain whether a relationship existed between MF activity and severity of arteriolosclerosis. MF were identified by morphology and alpha smooth muscle actin (alpha SMA) immunostaining. Analysis of vascular injury was performed by counting the number of interstitial arterioles after staining endothelial cells with von Willebrand factor (VWF) antibody. Arteriosclerosis was quantified by using a computer-aided image analyzer to measure the arteriolar wall surface and total arteriolar surface area, and the ratio of wall to total surface area was expressed as the index of arteriosclerosis (IA). Fractional area of interstitium (IFA), alpha SMA, and collagen III (Coll III) were quantitated by point counting. Results were related to structural and functional parameters using rank correlation coefficients. There was a strong correlation between IFA and Coll III staining (r = 0.83; P < 0.001). The alpha SMA staining correlated with IFA (r = 0.56; P < 0.001) and Coll III (r = 0.47; P < 0.001), and there were significant correlations between alpha SMA and total urinary protein (r = 0.47; P < 0.001), renal function (plasma creatinine) at time of biopsy (r = 0.51; P < 0.001), and the percent change in plasma creatinine after 4 years (delta Cr) (r = 0.37; P = 0.01). The IA correlated significantly with Coll III (r = 0.29; P = 0.02), glomerular filtration rate (GFR) (r = 0.39; P = 0.008), and creatinine (r = 0.33; P = 0.01), but no correlation was observed between alpha SMA and IA (r = 0.16; P = 0.23) or IA and delta Cr (r = -0.04; P = 0.6). Strong correlations could be shown between arteriolar density, IFA (r = 0.75; P < 0.001), alpha SMA (r = -0.36; P = 0.034), and Coll III (r = -0.66; P < 0.0001). The MF appears to have a significant role in the progression of diabetic nephropathy. Ischemia secondary to arteriosclerosis may contribute to interstitial fibrosis through fibroblast modulation into MF.     

Frequency dependence of the complex dielectric constant of sodium carboxymethyl cellulose

The dielectric constant, ε′, and dielectric loss, ε″, were determined for three solid carboxymethyl cellulose samples having different levels of substitution and different degrees of polymerization over a frequency range of 0.1 – 10 000 kHz at temperatures from 10–60°C. In contrast to the two relaxation processes, γ and β, previously observed in native cotton cellulose, only one relaxation process within a frequency range of 0.1 – 1 kHz was identified. It was found that the dielectric properties do not only depend on the degree of substitution, but also on the weight-average degree of polymerization and uniformity of distribution.     

Mathematical modeling of falling liquid film evaporation process

A mathematical model of evaporation process from a laminar falling liquid film on a vertical plate of constant temperature is presented. The model is developed with and without interfacial shear stress due to the vapor flow at the liquid film surface. The vapor pressure drop, vapor exit velocity and cooling rate are calculated for different liquid mass flow values. It is shown that lower liquid mass flow produces higher cooling rate. The results also show that the interfacial shear stress has a considerable negative effect on the cooling rate. It is proved that there exists an optimum distance between the plates, which gives the maximum volumetric cooling rate.     

Effect of the percentage carbon equivalent on the nodule characteristics,density and modulus of elasticity of ductile cast iron

Successful melting and Mg treatment were conducted using a vortex unit which produced spheroidal graphite (SG) Fe ingots having a percentage carbon equivalent (%CE) ranging from 3.782 to 5.240. Microstructure examination revealed graphite nodules embedded in a white matrix (unetched condition). The variation of %CE proved to have a pronounced effect on the nodule characteristics. The nodule count showed a maximum value at %CE of 4.613. For metal-mould ingots it reached a value of 1584 nodules mm^–2, while for sand-mould ingots it reached a value of 970 nodules mm^–2. Nodule size was found to be inversely proportional to the nodule count for both sand- and metal-mould ingots. The nodularity of all ingots was, in general, higher than 95%. The density of SG Fe was found to decrease gradually (at %CE=3.782) from 7242 to 6969 kg m^–3. The modulus of elasticity (E) showed a boat-like curve having minimum values of 189 and 192 GPa for the sand and metal moulds, respectively.     

Processing and microstructural evolution of powder metallurgy Zn-22 Pct Al eutectoid alloy containing nanoscale dispersion particles

The present article deals with the processing and microstructural evolution of powder metallurgy (PM) Zn-22Al pct eutectoid alloy. The powder material was produced through inert gas atomization and then cryomilled in liquid nitrogen. The milled powder particles were consolidated by hot isostatic pressing (“hipping”) followed by thermomechanical treatment, resulting in a two-phase microstructure. The microstructures were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The principal processing factors and microstructural characteristics associated with the major processing steps, including spray atomization, mechanical milling (MM), consolidation, and heat treatment, were evaluated and discussed. Hot isostatic pressing and extrusion followed by heat treatment to produce the superplastic structure (Al-rich phase and Zn-rich phase) are effective in elimination porosity. A TEM examination of the microstructure of the alloy after processing reveals the presence of nanodispersion particles that are not uniformly distributed. The formation of the dispersions was attributed to the interaction between the powder material (primarily Al phase) and environmental elements such as oxygen and nitrogen during milling. Moreover, the size and distribution of the dispersions present in the bulk material met the anticipated requirements for serving as inhibitors for grain growth and barriers for dislocation movement. The TEM observations on crept specimens reveal extensive dislocation/dispersion interactions.     

DynMo-TE: Dynamic simulation model of space reactor power system with thermoelectric converters

A space reactor power system (SRPS) has been developed for avoidance of single point failures in reactor cooling and energy conversion. The sectored compact reactor (SCoRe) in this system is lithium-cooled and the reactor core is divided into six equal sectors with liquid metal heat pipes dividers. These reactor sectors are neutronically, but not thermal-hydraulically, coupled. Each sector has its own primary and secondary circulating lithium loops, which are thermally coupled both in a SiGe thermoelectric (TE) power conversion assembly (PCA) and a thermoelectric conversion assembly (TAC) that powers the electromagnetic pumps in the primary and secondary loops. Each secondary loop also has a separate, segmented radiator panel that is optimized for low specific mass and low liquid lithium inventory. The primary loops transport the thermal power generated in the reactor to six PCAs that nominally supply a total of 111.5 kW_e to the load at 450 V DC. Each of the 12 primary and secondary loops has its own bellows-type accumulator that is designed to regulate the lithium pressures in the loops. A dynamic simulation model of this thermoelectric SRPS (DynMo-TE) has been developed and used to investigate the transient operation of the system during a startup from a fully-thawed condition at 600 K, to nominal steady-state operation at which the lithium coolant exits the reactor at only 1179 K. Also investigated is the load-following characteristic of the SCoRe-TE SRPS, following a change in the electrical load demand.     

Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Oil Families and Their Potential Sources in the Southern Gulf of Suez, Egypt

Four oil families are identified in the southern Gulf of Suez, through high-resolution geochemical studies including gas chromatography, gas chromatography-mass spectrometry, and carbon isotope analyses. Biological features characterize oils in family 1a, suggesting tertiary carbonate source rocks for these oils, rich in type II organic matter and deposited under anoxic depositional environment. Family 1b oil shows minor variations in the source of organic matter and the depositional environment, as it was derived from carbonate source rock with more algal and bacterial contribution and minor input of terrestrial organic sources, deposited under less saline condition compared to family 1a oil. Family 2 oil, although genetically related to family 1a oil, has some distinctive features, such as diasterane to sterane and pristane to phytane ratios, which suggest clay-rich source rocks and a more oxic depositional environment. Also, the lack of oleanane indicates pre-tertiary source rocks for this oil. In contrast, family 3 oil is of mixed sources (marine and non-marine), generated from low sulfur and clay-rich source rock of tertiary and/or younger age. Family 4 oil seems to be mixed from family 1b and family 3 oils, sourced mainly from carbonate source rocks rich in clay minerals with algal and bacterial contributions. Family 4 oil is highly mature, family 1b oil lies within equilibrium values (peak oil generation stage), while the other families are more or less near equilibrium.