Extraction of metals from sulphides using sulphur trioxide in fluidised bed

The kinetics of the reaction of chalcopyrite, iron sulphide, copper sulphide, and nickel sulphide with sulphur trioxide gas were studied using a fluidised bed technique. O₂, N₂, or air was used as a carrier gas for the sulphur trioxide in fluidisation. Binary mixtures of finely ground (0.37–75 μm) samples were reacted with the sulphur trioxide in a Pyrex column at 373–673 K. The reaction products were leached with water and the soluble metals in the solution were determined by atomic absorption spectrometry. The total soluble reaction products were determined gravimetrically. The results obtained showed that a higher yield of soluble salts was obtained when O₂ or air was used as a carrier gas for sulphur trioxide than when an inert gas was used. Higher yields of soluble salts were obtained when the samples were most finely ground. Increase of copper sulphide content in binary mixtures with iron or nickel sulphide led to an increase in the yield of soluble salts. For iron sulphide/nickel sulphide mixtures, the yield of soluble salts increased with the nickel sulphide content. There were maximum values for the soluble metal ratios Ni/Fe and Cu/Ni in the corresponding sulphide binary mixtures and this maximum was at about 50% weight. The soluble Cu/Fe ratio increased with copper sulphide content in mixtures with iron sulphide.     

HColonies: a new hybrid metaheuristic for medical data classification

Medical data feature a number of characteristics that make their classification a complex task. Yet, the societal significance of the subject and the computational challenge it presents has caused the classification of medical datasets to be a popular research area. A new hybrid metaheuristic is presented for the classification task of medical datasets. The hybrid ant–bee colonies (HColonies) consists of two phases: an ant colony optimization (ACO) phase and an artificial bee colony (ABC) phase. The food sources of ABC are initialized into decision lists, constructed during the ACO phase using different subsets of the training data. The task of the ABC is to optimize the obtained decision lists. New variants of the ABC operators are proposed to suit the classification task. Results on a number of benchmark, real-world medical datasets show the usefulness of the proposed approach. Classification models obtained feature good predictive accuracy and relatively small model size.     

Arylidene polymers. XVIII. Synthesis and thermal behavior of organometallic arylidene polyesters containing ferrocene derivatives in the main chain

A new interesting category of organometallic polyesters based on diarylidenecycloalkanones containing ferrocene derivatives in the polymer main chain has been prepared by interfacial polycondensation of 1,1′-dichlorocarbonyl ferrocene or 1,1′-dichlorocarbonyl-4,4′-diiodoferrocene with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene) cycloheptanone. The resulting polyesters were characterized by elemental analyses, infrared spectroscopy, solubility, and viscometry measurements. The thermal behavior of the synthesized polymers was evaluated by thermal gravimetric analysis and correlated with their structures. The crystallinity of all polymers were examined by x-ray diffraction analysis. Moreover, the electrical conductivity of a selected example of polymer was investigated above the temperature range (300–500 K) and showed that it followed an Arrhenius-type equation with activation energy 2.09 eV. © 1993 John Wiley & Sons, Inc.     

Sintering of Ceramic Particulate Composites: Effect of Matrix Density

Composites consisting of a fine-grained, polycrystalline zinc oxide matrix and <10 vol% coarse, rigid silicon carbide inclusions were prepared by the same mixing procedure and then compacted to produce samples with matrix densities of 0.45 and 0.68 of the theoretical. The samples were sintered under identical temperature profiles in separate experiments that employed either a constant rate of heating of 4°C/min or near isothermal heating at 735°C. The ratio of the densification rate of the composite matrix to the densification rate of the unreinforced zinc oxide was found to be independent of the initial matrix density. This ratio increased significantly with temperature in the constant-heating-rate experiments but was relatively constant in the isothermal experiments. The results indicate that microstructural coarsening may be an important mechanism for explaining the reduced sinterability of polycrystalline matrix composites.     

A preemptive bound for the Resource Constrained Project Scheduling Problem

The Resource Constrained Project Scheduling Problem is one of the most intensively investigated scheduling problems. It requires scheduling a set of interrelated activities, while considering precedence relationships, and limited renewable resources allocation. The objective is to minimize the project duration. We propose a new destructive lower bound for this challenging ${\mathcal {NP}}$ -hard problem. Starting from a previously suggested LP model, we propose several original valid inequalities that aim at tightening the model representation. These new inequalities are based on precedence constraints, incompatible activity subsets, and nonpreemption constraints. We present the results of an extensive computational study that was carried out on 2,040 benchmark instances of PSPLIB, with up to 120 activities, and that provide strong evidence that the new proposed lower bound exhibits an excellent performance. In particular, we report the improvement of the best known lower bounds of 5 instances.     

Predictive and content-aware load balancing algorithm for peer-service area based IPTV networks

Load balancing is a crucial factor in IPTV delivery networks. Load balancing aims at utilizing the resources efficiently, maximizing the throughput, and minimizing the request rejection rate. The peer-service area is the recent architecture for IPTV delivery networks that overcomes the flaws of the previous architectures. However, it still suffers from the load imbalance problem. This paper investigates the load imbalance problem, and tries to augment the peer-service area architecture to overcome this problem. To achieve the load balancing over the proposed architecture, we suggest a new load-balancing algorithm that considers both the expected and the current load of both contents and servers. The proposed load-balancing algorithm consists of two stages. The first stage is the contents replication according to their expected load, while the second stage is the content-aware request distribution. To test the effectiveness of the proposed algorithm, we have compared it with both the traditional Round Robin algorithm and Cho algorithm. The experimental results depict that the proposed algorithm outperforms the two other algorithms in terms of load balance, throughput, and request rejection rate.     

H ∞ filtering for singular bilinear systems with application to a single-link flexible-joint robot

In this paper, we consider the H _∞ filters design for singular bilinear systems. The approach is based on the parameterized solution of a set of constrained Sylvester equations. The exponential convergence and l ₂ gain attenuation problems are solved by using the bounded real lemma, which leads to linear matrix inequalities (LMI) formulation. Finally, a detailed design procedure is given for the estimation of the states of a flexible joint robot, which demonstrates the effectiveness of the proposed method.     

Numerical and experimental investigation of three-dimensional flow in extrusion dies

The univariant element, Q₁ P₀, and the multivariant elements, QP₀ and R P₀, are compared for the numerical simulation of the flow in extrusion dies. The pressure distribution obtained by using the Q₁ P₀ element was found to be afflicted with the checkerboard pressure mode. On the other hand, the multivariant elements, Q P₀ and R P₀, gave accurate and physically reasonable velocity and pressure distributions. The computed values of the pressure drop across extrusion dies matched well with the pressure drop determined experimentally.     

Effect of drop coalescence on mass transfer rate

Disperse-phase-controlled mass transfer rates from individual liquid drops suspended in a second liquid phase are measured optically immediately after the drop has been formed by coalescence of two smaller droplets. The net effect on mass transfer of the act of coalescence is determined by comparison to similar measurements made on the initial droplets in the absence of coalescence. The transfer rates immediately after coalescence are high rapidly fall to zero, rebound to an intermediate value and finally decay to the level expected for an undisturbed drop. The net effect on total mass transferred is detrimental in a clean system subject to interfacial instability but appears to be beneficial for contaminated systems or where no surface movements are spontaneously generated.     

ABSORPTION AND DESORPTION TO AND FROM LIQUID FILMS ON INCLINED PLANES

Two published theoretical models are examined and applied to experimental results for absorption and desorption. The system used was CO₂/H₂O and studies were made for liquid film flow down inclined planes. Experimental results give “Reduced” values of mass ransfer rates.

Interferometric studies give interfacial concentration, penetration and film depths, and take-up of carbon dioxide. In the case of desorption the interferograms are distorted by “deflections.”

All the experimental values for absorption and desorption differ from those calculated from theoretical models.

Desorption is not a mirror image of absorption, and it is approximately 75% of the transfer rate of absorption over a wide operating range.

A comparison is made of the behaviour of static pools and flowing liquid films.