Channel access and interference issues in multi-code DS-CDMA wireless packet (ATM) networks

Multi-Code Direct-Sequence Code-Division-Multiple-Access (MC-CDMA) has been proposed as a flexible multiple access scheme for wireless packet networks that support a large variety of mobiles with different and even time-varying rates. Using MC-CDMA, traffic streams with significantly different transmission rates can be easily integrated into a unified architecture, with all the transmissions occupying the same bandwidth and having the same spread spectrum processing gain. In this paper, we address medium-access and interference issues in MC-CDMA wireless packet networks. For medium access, we propose and study Multi-Code CDMA (MC-CDMA) with Distributed-Queueing Request Update Multiple Access (DQRUMA) to form a unified bandwidth-on-demand fair-sharing platform for multi-rate wireless services. DQRUMA is an efficient demand-assignment multiple access protocol for wireless access and scheduling. Pseudo-Noise (PN) codes (primary codes) and optimal power levels are allocated to the mobiles on a slot-by-slot basis, and a Maximum Capacity Power Allocation (MCPA) criterion exploits the sub-code concatenation property of the MC-CDMA transmission. Simulation results show that the system provides close to ideal-access performance for multi-rate mobiles, both with homogeneous traffic characteristics and with a mix of heterogeneous traffic characteristics. Finally, we analyze the effects of MC-CDMA intercell interference on the reverse link (i.e., mobile to cell site) and investigate interference reduction by using the Maximum Capacity Power Allocation (MCPA) criterion. Our results show significant reduction in reverse-link MC-CDMA intercell interference is possible using the MCPA criterion.     

Free convection performance of circular cavities having two active curved vertical sides and two inactive curved horizontal sides

A detailed review of the archival reveals that the heat transfer and fluid flow characteristics of circular cavities have not been investigated so far and of course their physical features are not understood. A prominent application of these cavities arises in the miniaturized packaging of electronic components that are subject to strict constraints. This paper addresses primarily steady-state laminar natural convection of air in a circular cavity of diameter H inscribed in a square cavity of side H where the corresponding sides are in contact at four points. A third cavity, an arc–square cavity whose shape lies between the square and circular cavity shapes is included in the analysis. The finite volume method is used to perform the numerical simulations. The methodology takes into account the second-order-accurate QUICK scheme for the discretization of the convective term, whereas the pressure–velocity coupling is handled with the SIMPLE scheme. Since the air is not assumed a Boussinesq gas, it was decided to take all thermophysical properties as temperature-dependent. In the end, it has been demonstrated that the circular cavity possesses a superior balance between heat transfer enhancement and size in cross-section area in comparison with the standard square cavity. The side of the square cavity is similar to the diameter of the circular cavity.     

A process-tolerant out-of-band blocker rejection technique for SAW-less receivers

In this paper, an active filtering technique is presented which is capable of filtering the out-of-band blockers in wireless receivers. The concept is based on the feedforward cancellation technique where a blocker replica is subtracted at the output of the low-noise amplifier (LNA). In contrast to the previously reported feedforward cancellation methods, exact gain and phase matching are easily obtained in the proposed architecture to produce a highly selective narrowband frequency response at the output of the LNA with wide rejection bandwidth. For the proof of concept, the system is implemented in a 65 nm CMOS technology. It occupies a total area of 0.8 mm² and the current consumption is 24 mA from a 1.2 V supply. The system post-layout simulations showed a blocker rejection of more than 33 dB for blocker signals 100 MHz away from the desired signal when the feedforward path is activated. The noise figure (NF) of the entire system is 3.8 dB that degrades to 5.8 dB when the feedforward path is activated.     

Location Management in PCS Networks by Caching Two-Level Forwarding-Pointers

One of the challenging tasks in Personal Communication Services (PCS) is to efficiently maintain the location of PCS subscribers who move from one region to another (hereafter called mobile users). When a mobile user receives a call, the network has to quickly determine its current location. The existing location management scheme suffers from high signaling traffic in locating the mobile users. Two-level forwarding pointer scheme has been proposed from per-user forwarding pointer scheme to reduce the cost of signaling traffic. In this paper, we enhance the two-level forwarding pointer scheme. When a mobile user moves from its current Registered Area (RA), which is served by Mobile Switching Center (MSC), to another RA the local switch that acts as a parent of those two MSCs maintains this movement in its memory (hereafter called cache entry). A cache entry is used to locate rapidly the mobile user instead of querying the Home Location Register (HLR) and waiting for its reply. HLR is centralized in the network and far away from the mobile users so that the signaling traffic crossing it is expensive. Sometimes the cache entry may be failed to reach the mobile user then a two-level forwarding pointers will be created from the corresponding Visitor Location Register (VLR), attached to its MSC, through a correct path to locate the mobile user. Thus, there is a saving in cost of querying the underlying HLR. The analytical results indicate that such proposal efficiently reduces the signaling traffic cost for all values of Call to Mobility Ratio (CMR), this is especially considerable when CMR ≥1, without any increase in the call setup delay. Salah M. Ramadan (samohra@yahoo.com) received the BS and MS degrees from Computers Engineering Department, Al-Azhar University, Cairo, Egypt, in 1995 and 2002, respectively. From 2002, he was a Ph.D. student in Computers Engineering Department at Al-Azhar University and is currently pursuing the Ph.D. degree, where he is a research assistant in the Wireless Networks Branch. His research interests include traffic management in ATM networks, routing protocols, mobility management in PCS networks, and mobile computing. He is currently an instructor in Cisco Academy, Egypt. Ahmed M. El-Sherbini (Sherbini@mcit.gov.eg) received the Ph.D. in Electrical and Communication Engineering, Case Western University, U.S.A. March 1983 and M.Sc. in Communication Engineering, Cairo University, Giza, Egypt, June 1980. (M. Sc. Research Studies at the Ecole Nationale Superieure des Telecommunications (ENST), Paris, France). He is the Director, National Telecommunication Institute – Ministry of Communications and Information Technology, Egypt and Professor of Electrical and Communication Engineering Dept. Faculty of Engineering, Cairo University, Egypt. M. I. Marie received his B.Sc., M.Sc. and Ph.D. in electronic and communication engineering from Cairo University on 1972, 1981, 1985, respectively. Now he is a professor of communications at Computer and System Engineering department Al-Azhar University, Cairo, Egypt. His fields of interest includes digital communication, computer networks and protocols development. M. Zaki (azhar@mailer.scu.eun.eg) is the professor of software engineering, Computer and System Engineering Department, Faculty of Engineering, Al-Azhar University at Cairo. He received his B.Sc. and M.Sc. degrees in electrical engineering from Cairo University in 1968 and 1973 respectively. He received his Ph.D. degrees in computer engineering from Warsaw Technical University, Poland in 1977. His fields of interest include artificial intelligence, soft computing, and distributed system.     

Models of Restoration Probability in WDM Networks Employing Active Restoration

The ever-increasing demand for network bandwidth makes network survivability an issue of great concern. Lightpath restoration is a valuable approach to guaranteeing an acceptable level of survivability in WDM optical networks with better resource utilization than that of its protection counterpart. Active restoration (AR) is a newly proposed lightpath restoration scheme [M. Mostafa et al. OSA Journal of Optical Networking, vol. 3, no. 4, pp. 247–260] that combines the best of protection and reactive restoration while avoiding their shortcomings. In this paper, we conduct detailed performance analysis on the restoration probability of AR-based WDM networks. In particular, analytical models of restoration probability are developed respectively for networks with full-wavelength conversion capability and for networks without wavelength conversion capability under different backup path searching schemes. Based on the new models, we investigate the effects of wavelength availability, wavelength conversion capability, path length as well as backup path seeking methods on the restoration probability.     

Analysis and simulation of interrupt overhead impact on OS throughput in high‐speed networks

The paper presents analytical and simulation models to study the impact of interrupt overhead on operating system throughput of network elements such as PC‐based routers, servers, and hosts when subjected to high‐speed network traffic. Under such high network traffic, the system throughput will be negatively affected due to interrupt overhead caused by the incoming traffic. We first present an analytical model for the ideal system when interrupt overhead is ignored. We then present two models which describe the impact of high interrupt rate on system throughput. One model is for employing PIO in which network adapters are not equipped with DMA engines, and the other model is for employing DMA in which network adapters are equipped with DMA engines. The paper also describes detailed discrete‐event simulation models for the ideal system and for systems with DMA and PIO. Simulations results as well as reported experimental measurements show that our analytical models are valid and give a good approximation. Our analysis and simulation work can be valuable in providing insight to understand and predict system behaviour, as well as improving and maintaining good host performance. The paper identifies analytically critical design operation points such as that of overload condition. The paper also proposes solutions and recommendations for improving performance. Copyright © 2005 John Wiley & Sons, Ltd.     

A Combined Antenna Array and Multi-User Detection DS-CDMA Receiver in Single-Path and Multi-Path Fading Channels

An adaptive antenna array is incorporated into a decorrelatingmulti-user detector to effectively increase the DS-CDMA system capacity.Capacity improvement is due to beamforming gain, spatial diversity gain(assuming large angle spread), and the decorrelating effect. Thereceiver has been analyzed for the cases of sufficiently andinsufficiently spaced receiving antennas. The receiver consists of afront-end beamformer for every user in the cell and has knowledge of allusers' signature sequences. The beamformer estimates the desired userchannel vector, enhancing its signal and reducing the co-channelinterference from other directions. The multi-user detection, exploitingknowledge of other users, rejects those interferers whose arrival anglesare close to that of the desired user. The average uncoded Bit ErrorRate (BER) as a function of the number of in-beam active users, theaverage antenna Signal-to-Noise Ratio (SNR), and the number of receivingantennas is examined in both single-path and multi-path Rayleigh fadingchannels. Analysis shows an increase in system capacity proportional tothe number of receiving antennas.