On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth

Obtained results of micro and nano studies reveal that bismuth refines the silicon in which the flake silicon changed to lamellar structure with reduction in twin spacing from 160 to 75 nm. Bismuth segregates towards the inter-dendritic regions and decreases the Al-Si contact angle resulting in suppression of the silicon growth causing refinement of the eutectic structure. Increased recalescence temperature and time confirmed that the refinement effect is attributed to the growth stage.     

Prediction of Crack Nucleation in Rough Line-Contact Fretting via Continuum Damage Mechanics Approach

The crack nucleation behavior of rough surfaces in line contact is investigated by means of a thermodynamically based continuum damage mechanics technique. The deterministic approach is employed to investigate the effect of roughness on the surface tractions and contact stresses. In order to treat the effect of high stress gradients, a special averaging technique, proposed previously for the case of smooth surface, is adopted in this study. The predictions of the crack nucleation life are compared with the relevant experimental data in the literature and indicate the validity of the analysis.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.     

Design equations for prediction of pressuremeter soil deformation moduli utilizing expression programming systems

Providing precise estimations of soil deformation modulus is very difficult due to its dependence on many factors. In this study, gene expression programming (GEP) and multi-expression programming (MEP) systems are presented to derive empirical equations for the prediction of the pressuremeter soil deformation modulus. The employed expression programming (EP) systems formulate the soil deformation modulus in terms of the soil physical properties. Selection of the best models is on the basis of developing and controlling several models with different combinations of the affecting parameters. The proposed EP-based models are established upon 114 pressuremeter tests on different soil types conducted in this study. The generalization capabilities of the models are verified using several statistical criteria. Contributions of the variables influencing the soil modulus are evaluated through a sensitivity analysis. The GEP and MEP approaches accurately characterize the soil deformation modulus resulting in a very good prediction performance. The result indicates that moisture content and soil dry unit weight can efficiently represent the initial state and consolidation history of soil for determining its modulus.     

Residues of lead,cadmium, mercury and tin in canned meat products from Egypt: an emphasis on permissible limits and sources of contamination

In an attempt to determine the residual levels of lead (Pb), cadmium (Cd), mercury (Hg) and tin (Sn) in canned meat products marketed in Egypt, a total number of 160 random samples (40 each) of canned chicken luncheon (CCL), canned beef luncheon (CBL), canned frankfurter (CF) and canned corned beef (CCB) were randomly collected from different supermarkets in Egypt to be analyzed using atomic absorption spectrophotometry. From the obtained results, it was found that the mean values of residual levels of Pb in examined CCL, CBL, CF and CCB samples were 0.330, 0.224, 0.206 and 0.334 mg/kg, respectively, while those of Cd were 0.057, 0.053, 0.039 and 0.042 mg/kg, those of Hg were 0.387, 0.450, 0.402 and 0.332 mg/kg, and finally those of Sn were 2.061, 2.308, 0.755 and 1.997 mg/kg. The obtained results were compared with the permissible limits of heavy metals recommended by international and national authorities. In addition, the public health significance as well as the sources of contamination of canned meat products by heavy metals were addressed.     

Effects of IR Laser Shots on the Surface Hardness and Electrical Resistivity of High-Purity Iron

Annealed specimens of 99.99% pure iron were irradiated with 500, 750, 1000, and 1250 Nd:YAG laser shots. The laser fluence and laser intensity at the laser irradiation spot on the target surface were 4.4 × 10³ J/cm² and 4.8 × 10¹¹ W/cm², respectively. Vickers hardness of irradiated specimens was measured at various points separated by 0.5 mm in four different mutually perpendicular directions around the laser irradiation spot. The surface hardness profile for each irradiated specimen shows an increasing trend in surface hardness till a distance of 3.5 mm from the reference point. The average surface hardness (ASH) is found to increase up to 21% and electrical resistivity increases up to 50% as the number of laser shots is increased to 1250. A linear relationship between electrical resistivity and ASH is observed. Moreover, the ASH follows the well-known Hall-Petch relation, indicating that the crystallite boundaries impede the motion of dislocations to a greater extent as the crystallite size gets smaller.     

Biosorption of thorium from aqueous solution by Ca-pretreated brown algae Cystoseira indica

The potential use of a biosorbent, Cystoseira indica, obtained from the Persian Gulf was investigated for the removal of Th (IV) ions from aqueous solutions by considering equilibrium, kinetic and thermodynamic aspects. The FT-IR spectra of unloaded and Th-loaded biomass indicated various functionalities on the biomass surface including hydroxyl, amide and carboxyl groups, which are responsible for the binding of thorium ions. Th (IV) uptake by C. indica was pH dependent. An increase in biosorbent dosage up to 1 g/L caused an increase in the Th (IV) percentage removal. Biosorption process at all studied initial Th (IV) ion concentrations follows the pseudo-second order kinetic model. The biosorption data could be well described by Redlich-Peterson isotherm in comparison to Langmuir and Freundlich isotherms. The maximum sorption capacity of Th (IV) by Langmuir isotherm was estimated to be 169.49 mg/g at 45 °C with pH of 3. The thermodynamic parameters indicated the biosorption of Th on the biomass was a feasible, spontaneous and endothermic process. Th sorption capacity remained unaffected or slightly affected (<10% inhibition) in the presence of several interfering ions such as uranium (VI), nickel (II) and copper (II). The reusability of the biomass was also determined after five sorption-desorption cycles.     

Tuning catalytic performances of cobalt catalysts for clean hydrogen generation via variation of the type of carbon support and catalyst post-treatment temperature

Multi-walled carbon nanotubes, three types of activated carbons, single wall carbon nanotube and reduced graphene oxides were used to synthesize nano-sized Co catalysts for H₂ preparation via NH₃ decomposition. Catalyst samples were characterized by number of techniques such as N₂ physisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopes (XPS), Transmission electron microscopy (TEM), CO chemisorption, temperature-programmed reduction (H₂-TPR) and temperature-programmed desorption (N₂-TPD). The catalytic activities of the studied catalysts for H₂ production via NH₃ decomposition were measured in a fixed-bed micro-reactor. Co catalyst supported on multi-wall carbon nanotubes has shown the highest catalytic activity. The Co particles size was significantly affected by the variation of the post-treatment temperature. The Co particles size in the range of 4.7–64.8 nm can be effectively controlled by varying post-treatment temperature between 230 and 700 °C. The maximum TOF of NH₃ decomposition was registered on cobalt catalyst post-treated at 600 °C.