Impact of the Boeing 767 Aircraft into the World Trade Center

A numerical simulation of the aircraft impact into the exterior columns of the World Trade Center (WTC) was done using LS-DYNA. For simplification, the fuselage was modeled as a thin-walled cylinder, the wings were modeled as box beams with a fuel pocket, and the engines were represented as rigid cylinders. The exterior columns of the WTC were represented as box beams. Actual masses, material properties and dimensions of the Boeing 767 aircraft and the exterior columns of the WTC were used in this analysis. It was found that about 46% of the initial kinetic energy of the aircraft was used to damage columns. The minimum impact velocity of the aircraft to just penetrate the exterior columns would be 130?m/s. It was also found that a Boeing 767 traveling at top speed would not penetrate exterior columns of the WTC if the columns were thicker than 20?mm.     

Mining Non-Redundant Association Rules

The traditional association rule mining framework produces many redundant rules. The extent of redundancy is a lot larger than previously suspected. We present a new framework for associations based on the concept of closed frequent itemsets. The number of non-redundant rules produced by the new approach is exponentially (in the length of the longest frequent itemset) smaller than the rule set from the traditional approach. Experiments using several “hard” as well as “easy” real and synthetic databases confirm the utility of our framework in terms of reduction in the number of rules presented to the user, and in terms of time.     

Study of the impact of a new hurdle technology composed of electro‐activated solution and low heat treatment on the canned pea and corn quality and microbial safety

The objective of this work was to evaluate the quality of sterilised canned pea and corn in electro‐activated brine solutions at moderate temperatures. The lowest change in vitamin C was associated with the lowest heat treatment, while the short treatment time resulted in significant changes in texture and colour of vegetables. Best texture profile was obtained with the acid electro‐activated brine solution for pea and corn. The neutral electro‐activated brine solution resulted in a less firm texture for pea and corn. The green colour and brightness of canned pea were higher when neutral solution was used (a* = ?8.4 ± 0.3) than for the acidic one (a* = ?3.7 ± 0.6). The yellowness of corn was better with the neutral electro‐activated brine solution (b* = 36.32 ± 1.24) than with the acidic one (b* = 28.44 ± 2.39). Thirty‐three percent decrease of energy consumption was obtained using the electro‐activation technology.     

Amino acid composition,foaming, emulsifying properties and surface hydrophobicity of mustard protein isolate as affected by pH and NaCl

Amino acid composition, protein hydrophobicity, foaming and emulsifying properties of mustard protein isolate at pH 3, 5, 7 and in 0.05 and 0.1 m NaCl were studied. Glutamic (19.18 ± 0.30%) and aspartic (7.49 ± 0.11%) acids were the dominants. Foaming ability was enhanced by NaCl. Time to reach 75 mL foam was 23% higher in water than in NaCl. Drained volume after 10 min was concentration dependent and was the lowest in 0.05 and 0.1 m NaCl at protein concentration of 2.5% and 5%. The emulsifying properties were pH and concentration dependent, and the best results were obtained at pH 3, corresponding to the highest positive charge density of the protein surface. The highest emulsion stability (90.22 ± 3.52%) was obtained in 0.05 m NaCl and 5% protein concentration, whereas the lowest (63.00 ± 1.06%) was in water at all protein concentrations. Protein hydrophobicity was low and depended of pH but not of NaCl.     

High‐performance electromagnetic interference shielding material based on an effective mixing protocol

A facile and economic method is developed for the fabrication of new lightweight materials with high electromagnetic interference (EMI) shielding performance, good mechanical properties and low electrical percolation threshold through melt mixing. Electrical properties, DC conductivity, EMI shielding performance and mechanical properties of poly(trimethylene terephthalate) (PTT)/multiwalled carbon nanotube (MWCNT) nanocomposites with varying filler loading of MWCNTs were investigated. High‐resolution transmission electron microscopy was used to determine the distribution of MWCNTs in the PTT matrix. The newly developed nanocomposites show excellent dielectric and EMI shielding properties. Theoretical electrical percolation threshold was achieved at 0.21 wt% loading of MWCNTs, due to the high aspect ratio and the three‐dimensional network formation of MWCNTs. Experimental DC conductivity values were compared with those of theoretical models such as the Voet, Bueche and Scarisbrick models, which showed good agreement. The PTT/3% MWCNT composite showed an EMI shielding value of ～38 dB (99.99% attenuation) with a sample thickness of 2 mm. Power balance was used to determine the actual contribution of reflection, absorption and transmission loss to the total EMI shielding value. The nanocomposites showed good tensile and impact properties and the composite with 2% MWCNTs exhibited an improvement in tensile strength of as much as 96%. © 2018 Society of Chemical Industry     

Comparison of alteplase (tissue plasminogen activator) high‐dose vs. low‐dose protocol in restoring hemodialysis catheter function: The ALTE‐DOSE study

Hemodialysis catheter (HDC) dysfunction due to thrombosis is common, and dysfunction incidence can reach up to 50% within 1 year of use. Although administration of intraluminal alteplase (tissue plasminogen activator [tPA]) is the standard of practice to pharmacologically restore HDC function, there are no evidence‐based guidelines concerning the optimal tPA dose. The purpose of this study was to compare the efficacy of 1.0‐mg vs. 2.0‐mg tPA dwell protocols in restoring the HDC function in thrombotic dysfunctional catheters. A retrospective, single‐center study was conducted on two independent cohorts of patients; the first (n = 129) received 2.0 mg tPA/catheter lumen, while the second (n = 108) received 1.0 mg tPA/catheter lumen. Kaplan–Meier and Cox regression analyses were performed to compare the catheter survival time between patients who received 1.0 mg tPA and those who received 2.0 mg tPA. Catheter removal occurred in 25 (19.4%) of those catheters treated with 1.0 mg tPA compared with 11 (10.2%) of catheters treated with 2.0 mg tPA (P = 0.05). The hazard ratio (HR) for catheter removal was 2.75 (95% confidence interval [^95%CI] = 1.25–6.04) for the 1.0‐mg tPA cohort compared with the 2.0‐mg tPA cohort. Correction added on 3 December 2012, after first online publication: The tPA cohort values were changed. Female gender (HR = 2.51; ^95%CI = 1.20–5.27) and age (HR = 0.96; ^95%CI = 0.94–0.98) were also associated with catheter survival. Our findings suggest that treatment of dysfunctional HDC with 2.0‐mg tPA dwells is superior to 1.0‐mg tPA dwells.     

Three-level designs: Evaluation and comparison for screening purposes

Since their introduction by Box and Hunter, resolution criteria have been widely used when comparing regular fractional factorials designs. In this article, we investigate how a generalized resolution criterion can be used to assess some recently developed three-level screening designs, such as definitive screening designs (DSDs) and screening designs from weighing matrices. The aim of this paper is to capture the projection properties of those three-level screening designs, complementing the work of Deng and Tang, who used generalized resolution and minimum aberration criteria for ranking different two-level designs, particularly Plackett-Burman and other nonregular factorial designs. An advantage of generalized resolution, extended here to work on three-level designs, is that it offers a useful criterion for ranking three-level screening designs, whereas the Deng and Tang resolution is used mainly for the assessment of two-level designs. In addition, we applied a projection estimation capacity (PEC) criterion to select three-level screening designs with desirable properties. Practical examples and the best projections of the designs are presented in tables.