Statistical analysis of achievable resolution limit in the near field source localization context

In this fast communication, we derive the statistical resolution limit (SRL), characterizing the minimal parameter separation, to resolve two closely spaced known near-field sources impinging on a linear array. Toward this goal, we conduct on the first-order Taylor expansion of the observation model a Generalized Likelihood Ratio Test (GLRT) based on a Constrained Maximum Likelihood Estimator (CMLE) of the SRL. More precisely, the minimum separation between two near-field sources, that is detectable for a given probability of false alarm and a given probability of detection, is derived herein. Finally, numerical simulations are done to quantify the impact of the array geometry of the signal sources power distribution and of the array aperture on the statistical resolution limit.     

Tracking sand dune migration in the Rub Al-Khali with ICESat laser altimetry

Sand dune migration poses serious environmental and social problems for both the infrastructure and communities in the Saudi Arabian Peninsula. In order to monitor and better understand dune migration, a new method is proposed to estimate sand dune displacement/migration by using satellite laser altimetry data from the ICESat mission in the Rub Al-Khali. This method will exploit not only the differences in the observed ICESat elevation profiles, but also the phase differences between two co-located tracks when observed at different times. By using the phase differences, the proposed method will be able to estimate dune displacement vectors with an accuracy of 5 m root mean square. This accuracy has been validated using synthetic data with known displacements. The major causes for dune migration are the wind regime and the type of dunes (e.g. grain size and vegetation cover). A comparison of estimated dune displacement correlated well with the prevailing wind regime during the observation time period. A comparison with satellite imagery revealed that the dune shape and direction (i.e. the representative parameters of dune migration) are in agreement with the estimated displacement vectors. This method represents one of the first attempts to monitor dune migration using space observations only.     

Planar array of corrugated tapered slot antennas for ultrawideband biomedical microwave imaging system

A planar antenna array that includes 12 corrugated tapered slot elements for use in ultrawideband (UWB) biomedical microwave imaging systems is presented. The used corrugate tapered slot antenna has a compact size, low profile, moderate gain, and distortionless performance in the time domain. The array is immersed in a carefully designed matching liquid of suitable dielectric constant to improve the matching between the array and the imaged object, and thus, to increase the dynamic range of the imaging system. A suitable platform is designed and fabricated to accommodate the array, breast phantom, and a coupling liquid for the case of UWB breast imaging. The design of the whole system is optimized using trust‐region framework method in the simulation tool CST Microwave Studio. The performance of the designed array is confirmed via measurements in a realistic imaging environment. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

The use of basalt powder as a natural heterogeneous catalyst in the Fenton and Photo-Fenton oxidation of cationic dyes

The use of naturally present heterogeneous catalysts has recently been an essential issue in the Fenton and photo-Fenton processes. In this study, the uses of basalt as a catalyst for the Fenton and photo-Fenton reactions for methylene Blue (MB) and Basic Red 18 (BR18) degradations were investigated. Basalt was selected because of the presence of the iron (III) oxide in the structure. Basalt was characterized by X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) analysis to obtain the chemical composition and the crystalline phase. The surface charge and the surface area were obtained by zeta potential and Brunauer Emmett-Teller (BET) analysis. Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscope (SEM) were utilized to explore the functional group and the surface morphology. Fenton and photo-Fenton processes were applied to explore the best degradation method. Adsorption was also tested and the adsorption process had minimum removal efficiency (12% for MB and 17% for BR18). The removal efficiencies for MB and BR18 by the Fenton process were 87% and 28%, respectively. The photo-Fenton process had maximum removal efficiency with 100% for MB and 70% for BR18. The optimum conditions were 70 mg/L dye concentration, 5 mM H₂O₂, 1.0 g/L basalt loading and pH 2. Basalt has shown reuse capability as a catalyst for three consecutive cycles.     

Purification of Whole Brown Flaxseed Meal from Coloring Pigments by Treatment in Hydrogen Peroxide Solutions: Impact on Meal Color

The main objective of the present project was the purification of brown flaxseed meal from coloring pigments in order to improve its potential use as ingredient in food formulations. Thus, this work was aimed to study the bleaching of non-defatted brown flaxseed meal in dilute hydrogen peroxide solutions. Bleaching was evaluated according to the Hunter L, (a), and (b) color scale as function of the hydrogen peroxide concentration (1%, 2%, and 3% v/v), the meal concentration (2.5%, 5%, and 10% w/w), the bleaching time (10, 20, and 30?min), and the pH (3, 7, and 9). Effect of all the independent variables was significant. The L value was the most significantly affected parameter and increased as the concentration of hydrogen peroxide increased, but decreased as the concentration of flaxseed meal increased. The L value was observed to be higher at pH?9 than at pH?3 and 7. The b value, which represents the yellowness, was significantly increased from 18.70?±?0.01 (control sample) to 35.45?±?0.04 after the meal was treated with a 3% hydrogen peroxide solution at pH?9. Total phenolics content significantly decreased when the meal was treated with 3% (v/v) hydrogen peroxide solution. This concentration yielded the higher L color value (highly bleached meal).     

Ab initio study of phase stability in doped TiO2

Ab initio density functional theory calculations of the relative stability of the anatase and rutile polymorphs of TiO₂ were carried out using all-electron atomic orbitals methods with local density approximation. The rutile phase exhibited a moderate margin of stability of ~ 3 meV relative to the anatase phase in pristine material. From computational analysis of the formation energies of Si, Al, Fe and F dopants of various charge states across different Fermi level energies in anatase and in rutile, it was found that the cationic dopants are most stable in Ti substitutional lattice positions while formation energy is minimised for F^? doping in interstitial positions. All dopants were found to considerably stabilise anatase relative to the rutile phase, suggesting the anatase to rutile phase transformation is inhibited in such systems with the dopants ranked F?>?Si?>?Fe?>?Al in order of anatase stabilisation strength. Al and Fe dopants were found to act as shallow acceptors with charge compensation achieved through the formation of mobile carriers rather than the formation of anion vacancies.     

High-performance nanocomposites based on polyetherketones

Polyetherketones, PEKs, are an important family of high-performance thermoplastic materials that display a unique combination of toughness, stiffness, thermooxidative stability, chemical and solvent resistance, flame retardancy, and retention of physical properties at high temperatures. A relevant step forward in the development of these materials has been the recent incorporation of nanofillers to extend their utility in advanced technological applications. This review provides an extensive overview of the research on PEK-based nanocomposites with a special emphasis on both carbon-based nanofillers, such as nanotubes or nanofibers, and inorganic nanoparticles. Nanocomposites can be fabricated by simple, low-cost conventional techniques such as extrusion and compression molding, generally combined with pre-processing stages involving mechanochemical treatments in organic solvents. Different strategies employed to efficiently incorporate carbon nanofillers into these matrices, including polymer functionalization, covalent grafting and nanofiller wrapping in compatibilizing systems are described. The analysis of the influence of the preparation and processing conditions as well as the nanofiller type, attributes and loading on the structure and properties of the resulting materials is also considered. Composites incorporating carbon nanofillers display remarkably improved thermal stability, electrical and thermal conductivity as well as mechanical property enhancements compared to the neat polymers. On the other hand, the incorporation of inorganic nanoparticles such as WS₂, SiO₂ or Al₂O₃ significantly enhances the tribological properties of the matrix, mainly the coefficient of friction and wear resistance. Finally, current and potential applications of these multifunctional nanocomposite materials in fields such as medicine, telecommunications, electronics, aerospace, automobile and chemical industries are described.