One-step synthesized azo-dye modified Mg-Al LDH reinforced biobased semi-aromatic polyamide containing naphthalene ring; study on thermal stability and optical properties

A new series of polyamide Mg-Al layered double hydroxide (LDH) nanocomposites (PANC) were prepared using solution intercalation method. The biobased polyamide (PA) was synthesized using direct polycondensation reaction. Organo azo-dye modified Mg-Al LDH (OLDH) was prepared by one-step method and its effect on the thermal and optical properties of PA was investigated. The X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) results showed the uniform distribution of LDH sheets in the PA matrix. The UV-Vis spectra of PANC showed a blue shift as well as reduction in absorbance intensities and the photoluminescence studies revealed the higher emission intensities for PANC as compared to the neat PA. The results of thermogravimetric analysis (TGA) in both nitrogen and air atmospheres showed that the addition of OLDH up to 5 mass% was slightly improved thermal properties of PA.     

Study on single and binary catalytic systems of pyridine-imine catalysts based on nickel and iron in synthesis of reactor blends and low-density polyethylene nanocomposites

In the presence of modified methylaluminoxane as cocatalyst, the behavior of a binary catalytic system based on pyridine-imine nickel ( N ) and iron ( F ) catalysts was evaluated in order to reach a proper mixture of polyethylene (PE). A computational study along with kinetic profile suggested that the catalyst F with higher electron affinity (A) and electrophilicity (ω) in the methyl cationic active center and stronger interaction with the monomer led to high integrated monomer consumption and higher activity. In addition, the samples produced by the mixture of catalysts showed a higher value of [19.4 × 10⁴ g (PE) mol (Fe+Ni)⁻¹ h⁻¹)], melting point (127.8 °C), and crystallinity extent (41.29%) than the samples produced by the single catalysts. The addition of multiwalled carbon nanotubes (MWCNT) into the polymerization media reduced the activity of catalysts [from 7.50 × 10⁴ to 0.66 × 10⁴ g (PE) mol (Fe+Ni)⁻¹ h⁻¹] and the thermal properties of the low-density polyethylene nanocomposite samples. However, the sample containing 2.33% MWCNT_20-30 improved the total thermal stability of the neat polyethylene blend up to 400 °C. Scanning electron microscope images of the samples demonstrated irregular to virtually uniform morphologies were obtained through the in situ and solution-mixing techniques. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47376.     

Structural,morphological, and optical properties of W-doped VO2 thin films prepared by sol-gel spin coating method

Thermochromic VO₂ thin films were deposited on soda-lime glass via sol-gel method. Doping was done through adding tungstic acid solution to the vanadium solution precursor. Grazing incidence x-ray diffractometer (GIXRD) results showed that VO₂ and V₆O₁₃ phases were formed together in the heat-treated sample. According to the GIXRD result of the W-doped sample, only VO₂ remained. Field-emission scanning electron microscopy (FESEM) micrographs showed that the VO₂ grain size decreased from about 70 to about 25 nm for undoped film and 2 wt% W-doped films, respectively. Atomic force microscopy (AFM) results showed that the root mean square roughness for the film with 180 nm thickness was about 18 nm, and 2 wt% W-doped film had a smoother surface. Diffuse reflectance spectroscopy (DRS) results showed that the band gap energy for undoped, 1 wt% W- doped, and 2 wt% W-doped VO₂ thin films was 1.7, 1.3, and 0 eV, respectively. Four-point probe resistivity measurements showed a significant decrement, from approximately 1 MΩ at 15°C to <100 Ω at 80°C. Regarding Vis-NIR spectroscopy results, maximum optical transmission for undoped and W-doped films was approximately 75% and 35%, respectively.     

A356 Reinforced with Nanoparticles: Numerical Analysis of Mechanical Properties

Commercial casting Al-Si (A356)-based composites reinforced with different volume fractions of alumina (Al₂O₃) nanoparticulates (average particle size 50 nm) were synthesized in this study. Particle distribution, hardness, and tensile properties in the as-cast condition were experimentally investigated. The A356 alloy composite showed an increase in hardness, elastic modulus, and tensile strength compared with monolithic alloys. Finally, a combination of an artificial neural network and the finite element method (FEM) was implemented to predict the microstructure and mechanical properties including grain size, length of silicon rods, amount of porosity, hardness, tensile yield stress, ultimate tensile stress, and elongation percentage.     

A simultaneous planning of production and scheduling operations in flexible flow shops: case study of tile industry

The aim of this paper is to study a simultaneous lot-sizing and scheduling in multi-product, multi-period flexible flow shop environments. A new mixed integer programming (MIP) model is proposed to formulate the problem. The objective function includes the total cost of production, inventory, and external supply. In this study, in case of not meeting the demand of customers, this demand should be met by foreign suppliers in higher price. Due to the high computational complexity of the studied problem, a rolling horizon heuristic (RHH) and particle swarm optimization algorithm (PSO) are implemented to solve the problem. These algorithms find a feasible and near-optimal from production planning and scheduling. Additionally, Taguchi method is conducted to calibrate the parameters of the PSO algorithm and select the optimal levels of the influential factors. The computational results show that the algorithms are capable of achieving results with good quality in a reasonable time and PSO has better objective values in comparison with RHH. Also, the real case study for tile industry with real features is applied. Sensitivity analysis is used to evaluate the performance of the model.     

Investigation of the effects of time and temperature of oxidation on corrosion behavior of plasma nitrided AISI 4140 steel

In this paper, the effect of the time and temperature of the post oxidation process on corrosion behavior of AISI 4140 plasma nitrided steel has been studied. Plasma nitriding was carried out at 550 °C for 5 h with a gas mixture of N2/H2:3/1. The plasma nitrided samples were post oxidized for 30 and 60 min with a gas mixture of O2/H2: 1/5 at temperatures of 400 and 450 °C. The treated samples were characterized by optical microscopy, SEM, XRD, roughness testing, electrochemical polarization and salt spray testing. The X-ray analysis revealed the formation of the iron-nitride phases ε and γ′ during plasma nitriding and the iron oxide phases of magnetite and hematite through the post-oxidizing treatment. It was also demonstrated that the corrosion characteristics of the nitrided compound layer were further improved by post-oxidation treatment and that the least corrosion rate and optimum condition relative to pitting corrosion belongs to the oxidized sample at 450 °C for 30 min.     

Contribution of intermolecular interactions to constructing supramolecular architecture: Synthesis, structure and Hirshfeld surface analysis of a new hybrid of polyoxomolybdate and ((1H-tetrazole-5-yl) methyl)morpholine

A new soluble organic–inorganic hybrid based on polyoxomolybdate, [C₆H₁₂N₅O]₃[(PO₄)Mo₁₂O₃₆]·6H₂O (1), has been successfully synthesized and characterized by using elemental analysis, IR, UV spectroscopies, ¹H NMR technique, and single-crystal X-ray diffraction. According to the results of X-ray crystallography the anion [(PO₄)Mo₁₂O₃₆]³⁻ has a typical Keggin structure and the Mo–O distances of Mo–O–Mo bonds are alternately short and long in the polyoxoanion structure. Hirshfeld surface analyses, especially d_norm surface and fingerprint plots, are used for decoding intermolecular interactions in the crystal network and contribution of component units for the construction of the 3D architecture. The results indicate that in 1 the hydrogen bond interaction play a main role in the construction of the 3D architecture, especially the CHO interaction which overruns the classic NHO, NHO hydrogen bond interactions; van der Waals force between the peripheral atoms of component units cannot be ignored.     

An innovative approach to electro-oxidation of dopamine on titanium dioxide nanotubes electrode modified by gold particles

Au/TiO₂/Ti electrodes were prepared by galvanic deposition of gold particles from an acidic bath containing KAu(CN)₂ in the presence of a citrate buffer onto TiO₂ nanotubes layer on titanium substrates. Titanium oxide nanotubes were fabricated by anodizing titanium foil in a DMSO fluoride-containing electrolyte. The morphology and surface characteristics of Au/TiO₂/Ti electrodes were investigated using scanning electron microscopy and energy-dispersive X-ray, respectively. The results indicated that gold particles were homogeneously deposited on the surface of TiO₂ nanotubes. The nanotubular TiO₂ layers consist of individual tubes of about 40–80 nm diameters. The electro-catalytic behavior of Au/TiO₂/Ti electrodes for the dopamine electro-oxidation was studied by cyclic voltammetry and differential pulse voltammetry. The results showed that Au/TiO₂/Ti electrodes exhibit a considerably higher electro-catalytic activity toward the oxidation of dopamine. The catalytic oxidation peak current showed a linear dependence on dopamine concentration and a linear calibration curve was obtained in the concentration range of 0.5–2.5 mM of dopamine.     

Thermal Stability Study of Ultrafine Grained 304L Stainless Steel Produced by Martensitic Process

An ultrafine grain 304L stainless steel with average grain size of about 650 nm was produced by martensitic process. 10 mm as-received sheets were 80% cold rolled in the temperature of ?15 °C and then annealed at 700 °C for 300 min to obtain ultrafine grained microstructure. The results showed that the ultrafine grained 304L steel has yield strength of 720 MPa, tensile strength of about 920 MPa, and total elongation of 47% which is about twice that of coarse grain structure. The effect of annealing temperature (750-900 °C) on the grain growth kinetics was modeled by isothermal kinetics equation which resulted in the grain growth exponent (n) and activation energy for grain growth of 4.8 and 455 KJ/mol, respectively. This activation energy was also compared with those for other austenitic steels to better understanding of the nature of grain growth and atoms mobility during annealing. It was found that activation energy for grain growth is about twice higher than self-diffusion activation energy of austenite that is related to the Zener pinning effects of the second phase particles.