Simple systolic arrays for discrete cosine transform

in this paper, simple 1-D and 2-D systolic array for realizing the discrete cosine transform (DCT) based on the discrete Fourier transform (DFT) fo an input sequence are presented. The proposed arrays are obtained by a simple modified DFT (MDFT) and an inverse DFT (IDFT) version of the Goertzel algorithm combined with Kung's approach. The 1-D array requiresN cells, one multiplier and takesN clock cycles to produce a completeN-point DCT. The 2-D array takes N clock cycles, faster than the 1-D array, but the area complexity is larger. A continuous flow of input data is allowed and no idle time is required between the input sequences.     

Sex-Related Differences in Regional Blood–Brain Barrier Integrity in Non-Demented Elderly Subjects

The role of the blood–brain barrier (BBB) breakdown has been recognized as being important in Alzheimer’s disease pathogenesis. We aimed to evaluate whether regional BBB integrity differed according to sex and whether differences in BBB integrity changed as a consequence of aging or cognitive decline, using dynamic contrast-enhanced (DCE)-magnetic resonance imaging (MRI). In total, 75 participants with normal cognition (NC) or mild cognitive impairment (MCI) underwent cognitive assessments and MRI examination including DCE-MRI. Regional K_trans was calculated in cortical regions and the Patlak permeability model was used to calculate BBB permeability (K_trans, min⁻¹). Females had a lower median K_trans in the cingulate and occipital cortices. In the “older old” group, sex differences in K_trans were only observed in the occipital cortex. In the MCI group, sex differences in K_trans were only observed in the occipital cortex. Age was the only predictor of cognitive assessment scores in the male MCI group; however, educational years and K_trans in the occipital cortex could predict cognitive scores in the female MCI group. Our study revealed that females may have better BBB integrity in cingulate and occipital cortices. We also found that sex-related differences in BBB integrity are attenuated with aging or cognitive decline.     

Supplementing with L-Tryptophan Increases Medium Protein and Alters Expression of Genes and Proteins Involved in Milk Protein Synthesis and Energy Metabolism in Bovine Mammary Cells

The objective of this study was to investigate the effects of supplementing with L-tryptophan (L-Trp) on milk protein synthesis using an immortalized bovine mammary epithelial (MAC-T) cell line. Cells were treated with 0, 0.3, 0.6, 0.9, 1.2, and 1.5 mM of supplemental L-Trp, and the most efficient time for protein synthesis was determined by measuring cell, medium, and total protein at 0, 24, 48, 72, and 96 h. Time and dose tests showed that the 48 h incubation time and a 0.9 mM dose of L-Trp were the optimal values. The mechanism of milk protein synthesis was elucidated through proteomic analysis to identify the metabolic pathway involved. When L-Trp was supplemented, extracellular protein (medium protein) reached its peak at 48 h, whereas intracellular cell protein reached its peak at 96 h with all L-Trp doses. β-casein mRNA gene expression and genes related to milk protein synthesis, such as mammalian target of rapamycin (mTOR) and ribosomal protein 6 (RPS6) genes, were also stimulated (p < 0.05). Overall, there were 51 upregulated and 59 downregulated proteins, many of which are involved in protein synthesis. The results of protein pathway analysis showed that L-Trp stimulated glycolysis, the pentose phosphate pathway, and ATP synthesis, which are pathways involved in energy metabolism. Together, these results demonstrate that L-Trp supplementation, particularly at 0.9 mM, is an effective stimulus in β-casein synthesis by stimulating genes, proteins, and pathways related to protein and energy metabolism.     

Material Design for 3D Multifunctional Hydrogel Structure Preparation

Hydrogels are recognized as one of the most promising materials for e-skin devices because of their unique applicable functionalities such as flexibility, stretchability, biocompatibility, and conductivity. Beyond the excellent sensing functionalities, the e-skin devices further need to secure a target-oriented 3D structure to be applied onto various body parts having complex 3D shapes. However, most e-skin devices are still fabricated in simple 2D film-type devices, and it is an intriguing issue to fabricate complex 3D e-skin devices resembling target body parts via 3D printing. Here, a material design guideline is provided to prepare multifunctional hydrogels and their target-oriented 3D structures based on extrusion-based 3D printing. The material design parameters to realize target-oriented 3D structures via 3D printing are systematically derived from the correlation between material design of hydrogels and their gelation characteristics, rheological properties, and 3D printing processability for extrusion-based 3D printing. Based on the suggested material design window, ion conductive self-healable hydrogels are designed and successfully applied to extrusion-based 3D printing to realize various 3D shapes.     

Determination of non-methane hydrocarbon emission factors from vehicles in a Tunnel in Seoul in May 2000

Measurements of non-methane hydrocarbons (NMHC) were performed at the entrance and exit of the Sangdo tunnel to estimate emission factors (EF) of NMHC from vehicles in May 2000. About 50 species were analyzed by a combined GC/FID and GC/MS system. Ethylene was the most abundant compound, followed by n-butane and acetylene, respectively. Based on the measurement data, the real world vehicular EF in Seoul was estimated. The highest EF value was 89.8 mg (veh-mile)^-1 for n-butane, followed by ethylene and toluene.     

Catalytic Combustion of Methane over Rare Earth Stannate Pyrochlore

Well-defined Ln₂Sn₂O₇ powders (Ln = La, Sm and Gd) with a phase-pure pyrochlore structure were synthesized by hydrothermal reaction. The catalytic activities of Ln₂Sn₂O₇ powders for methane combustion were measured. Methane oxidation started at 500 °C and increased with oxidation temperature. Catalytic methane combustion is strongly influenced by the presence of oxygen vacancies that form by breaking Sn–O lattice bonds as the temperature increases. Addition of manganese to the rare earth pyrochlores improved methane oxidation activity. Manganese-doped samarium stannate pyrochlore (Sm₂Sn_1.8Mn_0.2O₇) shows highest the catalytic activity. Light-off and complete oxidation temperatures were measured at about 400 and 650 °C, respectively.     

Preparation and properties of polyelectrolyte complex sponges composed of hyaluronic acid and chitosan and their biological behaviors

Polyelectrolyte complexes (PECs) composed of chitosan and hyaluronic acid (HA) were prepared in various pH regions and at different weight ratios. At low pHs, there was a strong ionic interaction between NH groups in chitosan and both COO^? and COOH groups in HA due to the deprotonation of HA, whereas weak linkages were formed at high pHs because only the carboxyl groups of HA could interact with NH groups in chitosan. The formation of PECs resulted in a decrease in the crystallinity and thermal stability caused by the interactions between polyions. With variations in the degree of ionization of polyions at various pH conditions, novel PEC sponges were prepared by the freeze drying of PEC solutions. Furthermore, for the evaluation of the wound‐healing effect of PEC sponges with or without an antimicrobial agent (silver sulfadiazine), they were applied to a full‐skin defect of a Wistar rat in vivo. The histology and computerized morphometric analysis of the epidermal healing confirmed the proliferation of fibroblasts in the wound bed and a distinct reduction in infectious agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 925–932, 2003     

Use of cascade reduction potential for selective precipitation of Au,Cu, and Pb in hydrochloric acid solution

Optimization of reduction potential for electroseparation was studied for the recovery of gold, copper, and lead from acidic solution. A linear sweep voltammetric method enabled us to determine characteristic reduction potentials for each metal and the kinetics of the metal deposition indicated by current-voltage curves. In order to precipitate the metal species sequentially, reduction potentials were examined for the individual and mixed solutions of Au(III), Cu(II), and Pb(II). The three metals were reasonably well isolated from the mixed solutions such as Cu(II)/ Pb(II) and Au(III)/Cu(II)/Pb(II) in the order of the corresponding reduction potentials, in particular, the mass transfer controlled reduction potentials, obtained from linear sweep voltammetry (LSV) measurement.     

Integrated fertilizer requirements of groundnut-wheat cropping system

Investigations were carried out in a long term field experiment from 1976 to 1982, on a loamy sand soil to find out the fertilizer requirements of groundnut and wheat grown in fixed rotation. Application of 26 kgP/ha to wheat alone was found to be sufficient for both wheat and succeeding groundnut. Application of phosphorus to both wheat and groundnut did not result in extra beneficial effect over P application to wheat alone. However, application of 26 kg P/ha to groundnut alone was not sufficient for succeeding wheat. There was no response from K application (25 kg K/ha) in either of these two crops. Increasing the dose of N from 50–150 kg/ha to wheat significantly increased the grain yield of wheat but the pod yield of succeeding groundnut were markedly lowered. Response of wheat to 150 kg N/ha was more marked when P was also applied to wheat and response was less when P was applied to preceding groundnut alone. Zinc application at 6.25 kg/ha to wheat alone resulted in significant increase in grain yield of wheat and pod yield of succeeding groundnut.     

Performance of fluorine-added CoMoS/Al2O3 prepared by sonochemical and chemical vapor deposition methods in the hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

The performance of a new type of CoMoS/Al₂O₃ catalyst, with added fluorine and prepared by sonochemical and chemical vapor deposition (CVD) methods, was investigated in the hydrodesulfurization (HDS) of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The catalyst, which was designed to contain optimum amounts of fluorine and cobalt, exhibited a higher activity, ca. 4.6 times higher activity particularly in the HDS of 4,6-DMDBT, than a fluorine-free catalyst prepared by a conventional impregnation method. The enhanced activity of the new catalyst can be attributed to the cumulative effects of individual factors involved in the catalyst preparation. That is, the use of a sonochemical synthesis led to a high dispersion of small MoS₂ crystallites on the alumina, and the addition of the Co species to the catalyst by CVD caused a close interaction between the Co species and the MoS₂ crystallites to produce numerous CoMoS species, which are the catalytically active species for HDS. The addition of fluorine increased the amounts of acidic sites in the catalyst, which promoted hydrogenation (HYD) route to a greater extent than the direct desulfurization (DDS) route in DBT HDS and both HYD and DDS routes to similar extents in the case of 4,6-DMDBT HDS. Accordingly, the addition of fluorine led to a greater increase in catalytic activity for 4,6-DMDBT HDS than for DBT HDS.