The role of oral processing in dynamic sensory perception

Food oral processing is not only important for the ingestion and digestion of food, but also plays an important role in the perception of texture and flavor. This overall sensory perception is dynamic and occurs during all stages of oral processing. However, the relationships between oral operations and sensory perception are not yet fully understood. This article reviews recent progress and research findings on oral food processing, with a focus on the dynamic character of sensory perception of solid foods. The reviewed studies are discussed in terms of both physiology and food properties, and cover first bite, mastication, and swallowing. Little is known about the dynamics of texture and flavor perception during mastication and the importance on overall perception. Novel approaches use time intensity and temporal dominance techniques, and these will be valuable tools for future research on the dynamics of texture and flavor perception.     

The Weathering Behavior of Heavy Metals in Ore Processing Residues (Mansfeld Region,Germany)

One of the ore processing residues in the Mansfeld region of Germany is a flue dust, which was scrubbed out of the smelter process gases by spraying water into the hot gas stream. During the many years of ore processing, the resulting fine-grained sludge was washed into ponds for storage. These sludge deposits were covered by water and thus sealed off from the atmosphere. However, after the local copper works shut down in 1990, the ponds dried up, causing the sludge in the uppermost layers to oxidize. The need to assess the risk posed by these deposits today prompted questions over the depth to which the dried sludge can be altered by weathering and the extent of heavy metal emissions. A drill hole was bored at the center of a dry pond and the core samples analyzed. The samples indicated relatively constant levels of Cu and Pb with depth, but other metals, such as Cd, Mn, and Zn, were relatively depleted in the upper 50 cm of the sludge body. Such behavior can be explained by the solubilities of the respective secondary phases. It appears that the oxidation of metal sulfides and the subsequent dissolution of the respective secondary phases, especially sulfates, pose a potential problem for the quality of the nearby ground and surface water.     

Magnetic resonance angiography demonstrates vascular healing of carotid and vertebral artery dissections

BACKGROUND AND PURPOSE: Dissection of the carotid and vertebral arteries is most accurately diagnosed with conventional angiography. MR techniques are sensitive for detecting the abnormalities associated with dissection but may lack specificity. We hypothesized that MR may be useful for serial monitoring of dissection and may therefore guide therapy. METHODS: All patients with angiographically proven carotid and/or vertebral artery dissection from July 1994 to June 1996 were followed for a median duration of 10.5 months. Of these 29 patients (44 vessels), 18 were concurrently evaluated with MR, and a target group of 9 patients (17 vessels) was prospectively followed with MR at 3-month intervals. RESULTS: In the 18 patients with both imaging studies at baseline, angiography revealed 30 dissected vessels while MR detected 27 (90%). In the target group of 9 patients, initial MR identified 15 of the 17 dissections diagnosed with angiography. Serial MR revealed complete healing in 5 vessels, improvement in 6 vessels, no change in 4 vessels, and worsening in 2 vessels. The radiographic features most likely to resolve were stenosis and mural hematoma, while occlusion and luminal irregularity tended to persist. Late ischemic events occurred in 2 patients, both with persistent MR evidence of dissection, one while subtherapeutic on warfarin therapy and the other occurring 1 week after warfarin was discontinued. CONCLUSIONS: MR is a reliable noninvasive method for following the vascular response to treatment and may guide the course of a clinical trial comparing medical therapies for carotid and vertebral artery dissection.     

Interaction of human leukotriene C4 synthase and microsomal glutathione transferase in vivo

Microsomal glutathione transferase (mGT) specifically binds leukotriene C4 synthase in the presence of Mg2+ ion (S?derstr?m et al., Protein Expression and Purification (1995) 6, 352-356). To investigate if this interaction occurs in vivo we screened a human lung cDNA library with a bait vector encoding human mGT in the yeast two-hybrid system. One of the five positive clones obtained encoded leukotriene C4 synthase. This clone was expressed in two heterologous systems. The recombinant protein cross-reacted with a guinea pig antibody raised against a Keyhole limpet hemocyanin coupled synthetic peptide corresponding to amino acids 141-150 of human leukotriene C4 synthase.     

Handedness and the risk of tardive dyskinesia

1. We investigated whether contractile responses evoked by 5-HT1D receptor agonists were influenced by the endothelium (E) and nitric oxide (NO) in the rabbit isolated saphenous vein. 2. Saphenous vein rings were set up for isometric tension recording in oxygenated (5% CO2 in O2) Krebs solution (pH 7.4) containing (10(-6) M): idazoxan (1), indomethacin (10), ketanserin (0.1), prazosin (10), and N(omega) nitro-L-arginine methyl ester (L-NAME; 0 or 10), a NO synthase inhibitor. In some experiments, the E was removed mechanically. 3. 5-Hydroxytryptamine (5-HT), 5-carboxamidotryptamine (5-CT) and sumatriptan (Sum) contracted rabbit saphenous vein rings in the potency order (pD2 range) of 5-CT(7.2-7.6) > 5-HT(6.2-7.1) > Sum(5.0-5.8), irrespective of the presence or absence of the E or L-NAME (n = 9-37 per group) indicating that the potencies of the 3 agonists were not significantly affected by either the E or L-NAME. 4. Efficacy, as assessed by the maximal contractile response (Emax), was significantly greater for Sum compared to 5-HT and 5-CT with intact E irrespective of the presence (77 +/- 3, 62 +/- 3, and 50 +/- 3 mN respectively; P < 0.05 Sum versus 5-HT and 5-CT) or absence (26 +/- 3, 14 +/- 4, and 13 +/- 2 mN respectively; P < 0.05 Sum versus 5-HT and 5-CT) of L-NAME. In E-denuded rings, the Emax values were all higher than in E-intact rings and did not differ between the 3 agonists (36 +/- 4, 37 +/- 4, and 36 +/- 5 mN for Sum, 5-HT and 5-CT, respectively; P > 0.5 between the 3 agonists) indicating that an endothelium-derived relaxing factor (EDRF) counteracted the constrictor activities of the 5-HT1D receptor agonists and raising the possibility that a component of the Sum-induced contractile responses was E-dependent. Without E, the presence of L-NAME did not significantly affect the Emax values of the 3 agonists (41 +/- 4, 41 +/- 5, and 41 +/- 4 mN for Sum, 5-HT, and 5-CT respectively; P > 0.5 between the 3 agonists) indicating that the NO synthase inhibited was of endothelial origin. 5. Potentiation of the Emax of the 3 agonists by L-NAME was significantly albeit partially reversed by L-arginine (10(-2) M) indicating that NO synthase was indeed inhibited by L-NAME. Furthermore, in the presence of E, potentiation of Emax of the 3 agonists by L-NAME was mimicked by methylene blue (10(-5) M) providing further evidence that NO was involved in the attenuation by the E of the contractile responses induced by the 5-HT1D receptor agonists. 6. In the presence of an intact E and L-NAME, contractile responses elicited by 5-HT and Sum were competitively antagonized by the non-selective 5-HT1D receptor antagonist, methiothepin (pA2: 9.4 and 8.8; slopes: 0.66 and 0.81, respectively) and the highly selective 5-HT1D receptor antagonist, GR 127935 (pA2: 9.0 in each case; slopes: 1.04 and 0.93, respectively) indicating that contractions were mediated through activation of a single population of 5-HT1D receptors. Contractile responses elicited by 5-CT were also competitively antagonized by methiothepin and GR 127935, but non parallel rightward shifts of the concentration-response curves were observed suggestive of the involvement of additional but as yet unidentified receptors in mediating the 5-CT-induced responses. 7. In conclusion, the efficacy, but not the potency, of 5-HT, 5-CT and Sum in evoking 5-HT1D receptor-mediated contractile responses are subject to a substantial inhibitory influence of the E and of an EDRF (probably NO).     

The major dog allergens, Can f 1 and Can f 2, are salivary lipocalin proteins: cloning and immunological characterization of the recombinant forms

Canis familiaris allergen 1 (Can f 1) and Canis familiaris allergen 2 (Can f 2) are the two major allergens present in dog dander extracts. We now report the isolation of cDNAs encoding both proteins and present their nucleotide and deduced amino acid sequences. Can f 1, produced by tongue epithelial tissue, has homology with the von Ebner's gland (VEG) protein, a salivary protein not previously thought to have allergenic properties. Can f 2, produced by tongue and parotid gland, has homology with mouse urinary protein (MUP), a known allergen. Both VEG protein and MUP are members of the lipocalin family of small ligand-binding proteins. Recombinant forms of Can f 1 and Can f 2 were produced and tested for immunoglobulin E (IgE) reactivity. Among dog-allergic subjects, 45% had IgE directed exclusively to rCan f 1, and 25% had IgE to both rCan f 1 and rCan f 2. In addition, both recombinant proteins were able to cross-link IgE and elicit histamine release from peripheral blood leucocytes in vitro. These findings confirm that Can f 1 and Can f 2 are major and minor dog allergens, respectively, and demonstrate that recombinant forms of dog allergens retain at least some IgE-binding epitopes.     

Numerical modelling of shear bands by element bands

It is presently a concern and challenge to numerically model shear band localization. Many numerical methods have been developed to take into account the strain and displacement discontinuities across a shear band. In this paper, a contact band element method is proposed to model the shear band with a finite thickness under large shear deformation. The shear band elements, alternatively called contact band elements, are continuously updated based on their current configurations to prevent the large distortions of conventional finite elements and maintain realistic shear band configurations. The contact band element method, with a technique for the special shear band element, consists of the schemes to keep the shear band elements in good shapes, handle the band overlapping, kinking and separation problems. A few examples have shown that the contact band element method is a very efficient way to model the shear bands under large shear deformation. Copyright © 2002 John Wiley & Sons, Ltd.     

Production of 230U/226Th for targeted alpha therapy via proton irradiation of 231Pa

(230)U and its daughter nuclide (226)Th are novel therapeutic nuclides for application in targeted alpha-therapy of cancer. We have investigated the feasibility of producing (230)U/(226)Th via proton irradiation of (231)Pa according to the reaction (231)Pa(p,2n)(230)U. The experimental excitation function for this reaction is reported for the first time. Cross sections were measured using thin targets of (231)Pa prepared by electrodeposition and (230)U yields were analyzed using alpha-spectrometry. Beam parameters (energy and intensity) were determined both by calculation using a mathematical model based on measured beam orbits and beam current integrator and by parallel monitor reactions on copper foils using high-resolution gamma-spectrometry and IAEA recommended cross-section data. The measured cross sections are in good agreement with model calculations using the EMPIRE-II code and are sufficiently high for the production of (230)U/(226)Th in clinically relevant amounts. A highly effective separation process was developed to isolate clinical grade (230)U from irradiated protactinium oxide targets. Product purity was assessed using alpha- and gamma-spectrometry as well as ICPMS.     

Evaluation of the potential of periodically operated reactors based on the second order frequency response function

A new, fast and easy method for analysing the potential for improving reactor performance by replacing steady state by forced periodic operation is presented. The method is based on Volterra series, generalized Fourier transform and the concept of higher-order frequency response functions (FRFs). The second order frequency response function, which corresponds to the dominant term of the non-periodic (DC) component, G₂(ω, −ω), is mainly responsible for the average performance of the periodically operated processes. Based on that, in order to evaluate the potential of periodic reactor operation, it is enough to derive and analyze G₂(ω, −ω). The sign of this function defines the sign of the DC component and reveals whether a performance improvement by cycling is possible compared to optimal steady state process. The method is used to analyze the periodic performance of a continuous stirred tank reactor (CSTR), a plug flow tubular reactor (PFTR) and a dispersive flow tubular reactor (DFTR), after introducing periodic changes of the input concentrations. A homogeneous, n-th order reaction is studied under isothermal conditions.     

Progress in AMS measurement of natural 32Si for glacier ice dating

AMS measurement of ³²Si can allow for ice core dating over the last thousand years. Technique developments are reported. Necessary negative-ion yields of 20–30% can now be consistently achieved, and permit an overall efficiency from ice sample to detector of ～1%. A ³⁰Si-spike technique has overcome the problem of extremely low intrinsic silicon concentration, with the added benefit of allowing determination of ppb-level silicon via isotope dilution. Improvements have also been made to the ionization detector in the gas-filled magnet that separates the accelerated ³²Si ions from the intense flux of ³²S ions. Preliminary ³²Si AMS results of snow and ice samples from Mt. Cook National Park, New Zealand, are reproducible, and with ³²Si concentrations 1.2–7.2 mBq/m³ comparable to results from mid-latitude snow samples measured previously via the radiometric technique, demonstrating the feasibility of the method. With these developments, the potential of ³²Si as ice core dating tool is close to being realized, and attempts to determine chronologies for both alpine and Antarctic glaciers are underway.