N ‐acetylcysteine–PLGA nano‐conjugate: effects on cellular toxicity and uptake of gadopentate dimeglumine

Gadolinium as a contrast agent in MRI technique combined with DTPA causes contrast induced nephropathy (CIN) and nephrogenic systemic fibrosis (NSF) which can reduce by usage of antioxidants such as N‐acetyl cysteine by increasing the membrane''s permeability leads to lower cytotoxicity. In this study, N ‐acetyl cysteine‐PLGA Nano‐conjugate was synthesized according to stoichiometric rules of molar ratios andafter assessment by FTIR, NMR spectroscopy and Atomic Force Microscopy (AFM) imaging was combined with Magnevist® (gadopentetate dimeglumine) and its effects on the renal cells were evaluated. MTT [3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐Diphenyltetrazolium Bromide] and cellular uptake assays have indicated relatively significant toxicity of magnevist (P  < 0.05) on three cell lines including HEK293, MCF7 and L929 compared to other synthesized ligands that shown no toxicity. Moreover, systemic evaluation has shown no notable changes of blood urea nitrogen (BUN) and creatinine in kidney of mice. In consequence, antioxidant effect was increased as well as the renal toxicity of the contrast agent reduced at the cell level. As a result, PLGA‐NAC nano‐conjugate can be a promising choice for decreasing the magnevist toxicity for treatment and prevention of CIN and will be able to open a new horizon to research on reduction of toxicity of contrast agents by using nanoparticles.Inspec keywords: blood, toxicology, nanofabrication, cellular biophysics, biomedical materials, nanoparticles, chromatography, cancer, biodegradable materials, biomedical MRI, kidney, pH, nanomedicine, patient treatment, diseases, atomic force microscopy, Fourier transform infrared spectraOther keywords: cellular toxicity, gadopentate dimeglumine, contrast agent, magnetic resonance imaging technique, diethylenetriamine pentaacetate, contrast‐induced nephropathy, nephrogenic systemic fibrosis, stoichiometric rules, molar ratios, dimethyl sulphoxide solution, chromatography techniques, nuclear magnetic resonance spectroscopy, atomic force microscopy imaging, Magnevist®, gadopentetate dimeglumine, renal cells, MTT cytotoxicity, human embryonic kidney‐293, L929 cell lines, in vitro conditions, cellular uptake assays, Magnevist uptake, antioxidant effect, renal toxicity, cell level, PLGA nanocarrier, acetylcysteine nanoconjugate, Magnevist toxicity, N‐acetylcysteine–PLGA nano‐conjugate, N‐acetyl cysteine‐poly‐lactic‐co‐glycolic acid nanoconjugate     

Microbial conversion of androst‐1,4‐dien‐3,17‐dione by Mucor racemosus to hydroxysteroid‐1,4‐dien‐3‐one derivatives

BACKGROUND: A large number of bacterial, fungal and microalgal species are able to bio‐transform steroid compounds. Among them, fungi from the Mucor genus have been shown to mediate hydroxylation, oxidation, and desaturation by the double bond formation and epoxidation of various steroid substances. Mucor racemocus has not been studied for its ability to modify androst‐1,4‐dien‐3,17‐dione, a pharmaceutically important steroid precursor. RESULTS: The filamentous fungus M. racemosus was applied for bioconversion of androst‐1,4‐dien‐3,17‐dione (ADD, I ) in a 5‐day fermentation. Microbial metabolites were purified chromatographically and identified on the basis of their spectral data as 17β‐hydroxyandrost‐1,4‐dien‐3‐one ( II ), 14α‐hydroxyandrost‐1,4‐dien‐3,17‐dione ( III ), 15α‐hydroxyandrost‐1,4‐dien‐3,17‐dione ( IV ), 15α,17β‐dihydroxyandrost‐1,4‐dien‐3‐one ( V ), 14α,17β‐dihydroxyandrost‐1,4‐dien‐3‐one ( VI ), and 6β,17β‐dihydroxyandrost‐1,4‐dien‐3‐one ( VII ). CONCLUSION: Observed modifications included hydroxylation at C‐6β, C‐14α, C‐15α positions and 17‐carbonyl reduction. The best fermentation conditions for production of hydroxysteroid‐1,4‐dien‐3‐one derivatives were found to be 25 °C at 150 rpm for 5 days with a substrate concentration of 0.5 g L^?1. Copyright © 2009 Society of Chemical Industry     

Evaluation of the moment-rotation curve of I beam-to-CFT column connection with endplate,using mechanical modeling

Through this study, a method is presented to estimate moment-rotation (M-) curve of I beam-to-the concrete filled tube (CFT) connections. This method is based on the components method in which components are analyzed and modeled as different mechanical models. These components are considered as springs with specific mechanical properties of stiffness, strength, and rigid bars. Their force-displacement relationship is assumed bi-linear and 3-linear. The connection behavior is assumed through assembling the stiffness of different components. In this study, connection of I beam-to-CFT column with bolted endplate connection under monotonic loading, which has been tested in the laboratory, is evaluated. It must be mentioned that those bolts which penetrated into the column depth have been used in order to create continuity between flanges of the column. The suggested method has been compared with the experimental test and the advanced finite element model in terms of stiffness, strength, and rotational capacity; moreover, its operation was satisfactory.     

A study on the cure characteristics of epoxy/diaminodiphenylmethane system prepared at room temperature

The curing behavior and kinetics of epoxy resin with diaminodiphenylmethane (DDM) as the curing agent was studied by many researchers, however all of them prepared the system at a high‐temperature condition (i.e., T ≥ 80°C). In this study, a mixture of epoxy/DDM was prepared at ambient temperature and its curing characteristics were studied by using differential scanning calorimetry (DSC). The autocatalytic model was used to calculate the kinetic factors in the dynamic experiments. The kinetics of the curing reaction was also evaluated by two different isoconversional models; namely Friedman method and the Advanced Isoconversional method proposed by Vyazovkin to investigate the activation energy behavior during the curing reaction. The activation energy of the curing reaction was found to be in the range of 48 ± 2 kJ/mol and might be considered to be constant during the curing. In fact, our findings were different from the result reported by other researchers for the system which was prepared at elevated temperature. Therefore, it seems that the preparation temperature of the samples influenced considerably on the curing behavior of epoxy with DDM. Finally, a time–temperature–transformation (TTT) diagram was established to determine the cure process and glass transition properties of the system. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Double-command fuzzy control of a nonlinear CSTR

In this research, double-command control of a nonlinear chemical system is addressed. The system is a stirred tank reactor; two flows of liquid with different concentrations enter the system through two valves and another flow exits the tank with a concentration between the two input concentrations. Fuzzy logic was employed to design a model-free double-command controller for this system in the simulation environment. In order to avoid output chattering and frequent change of control command (leading to frequent closing-opening of control valves, in practice) a damper rule is added to the fuzzy control system. A feedforward (steady state) control law is also derived from the nonlinear mathematical model of the system to be added to feedback (fuzzy) controller generating transient control command. The hybrid control system leads to a very smooth change of control input, which suits real applications. The proposed control system offers much lower error integral, control command change and processing time in comparison with neuro-predictive controllers.     

A novel online affine model identification of multivariable processes using adaptive neuro-fuzzy networks

This paper presents a novel systematic identification methodology for online affine modeling of multivariable processes using adaptive neuro-fuzzy networks. The proposed approach introduces an integrated procedure to simultaneously estimate a number of adaptive neuro-fuzzy networks with simple and compact dynamic structures to realize a multivariable affine model identification in real-time. A new fuzzy rule significance concept, based on a generic time-weighted rule activation record (WRAR), together with a measure of time-weighted root mean square (WRMS) error are incorporated to maintain efficient structural and parametric mechanisms for proper adaptation of the resulting neuro-fuzzy networks. An extended Kalman filter (EKF) algorithm is developed to adaptively adjust the neuro-fuzzy free parameters corresponding to the nearest created fuzzy rules. Extensive simulation test studies will be conducted to explore the capabilities of the proposed identification approach to adaptively develop online multivariable affine dynamic models for a highly nonlinear and time-varying continues stirred tank reactor (CSTR) and a highly nonlinear binary distillation column as two challenging benchmark problems.     

Synthesis and identification of organosoluble polyamides bearing a triaryl imidazole pendent: Thermal,photophysical, chemiluminescent,and electrochemical characterization with a modified carbon nanotube electrode

A novel monomer containing a triaryl imidazole pendent group was successfully synthesized by nucleophilic substitution of bisphenol A with 2-(2-chloro-5-nitrophenyl)-4,5-diphenyl-1H-imidazole (I). A series of new polyamides (PAs) with inherent viscosities of 0.95–1.2 dL/g was prepared by direct polycondensation of the diamine with various dicarboxylic acids. These PAs were readily soluble in many organic solvents and gave tough and flexible films by solution casting. These PAs exhibited T_gs between 189 °C and 252 °C, and 10% weight loss temperatures in excess of 400 °C with up to 68% char yield at 600 °C in air. All of the PAs emitted a greenish-yellow light in dilute THF solution, with photoluminescence (PL) quantum yields in the range of 10–25%. The chemiluminescent activity and electrochemical oxidation of the PAs were also investigated.     

Investigation on the resistance spot-welded austenitic/ferritic stainless steel

In this work, the effect of weld current on joining capability of austenitic stainless steel (AISI 304) and ferritic stainless steel (AISI 430) sheets with application of resistance spot welding process was investigated. Macrostructure, microstructure, microhardness, tensile shear strength, and failure mode of welded materials were evaluated for different weld currents. The values of weld current were 2.5, 3.75, and 5 kA. It was found that when the weld current increased, the nugget size and the weld strength were increased. Two distinct failure modes including interfacial and pullout were observed during tensile shear test. Finally, an adequate weld current was obtained.     

Band structure effect on the electron current oscillation in ultra-scaled GaSb Schottky MOSFET: tight-binding approach

This paper explores band structure effect on the quantum transport of a low-dimensional GaSb Schottky MOSFET (SBFET) for the implementation of III–V transistor with a low series resistance. Precise treatment of the full band structure is employed applying sp ³ d ⁵ s ^? tight-binding (TB) formalism. A remarkable distinction between the thickness dependent effective masses extracted from the TB and the bulk values imply that the quantum confinement modifies the device performance. Strong transverse confinement leads to the effective Schottky barrier height increment. Owing to the adequate enhanced Schottky barriers at low drain voltages, a double barrier gate modulated potential well is formed along the channel. The double barrier profile creates a longitudinal quantum confinement and induces drain current oscillation at low temperatures. Significant factors that may affect the current oscillation are thoroughly investigated. Current oscillation is gradually smoothed out as the gate length shrinks down in ultra scaled structure. The results in this paper are paving a way to clarify the feasibility of this device in nanoscale regime.