Radiation-induced wood plastic composites under combinations of monomers

Radiation-induced wood plastic composites (WPC) were prepared from five varieties of Bangladeshi timbers, using seven different types of monomers. The mixtures of double and triple monomers were investigated along with the single-monomer system for the preparation of composites. Among the three systems, single-monomer process showed the highest polymer loading with butylmethacrylate (BMA). Tensile strength (TS) property, represented as T_f = TS_wpc/TS_wood was determined. Highest T_f values were achieved with the soft wood. The effects of dose and dose rate, monomer concentration, and swelling agent were also studied. Suitable total dose was found to be 3 Mrad at 0.8 Mrad/h, and methanol exhibited the best swelling ability for the woods at a ratio of 1 : 9 v/v in all the monomer investigated.     

Oxidation Kinetics of an Amorphous Silicon Carbonitride Ceramic

The oxidation kinetics of amorphous silicon carbonitride (SiCN) was measured at 1350°C in ambient air. Two types of specimens were studied: one in the form of thin disks, the other as a powder. Both specimens contained open nanoscale porosity. The disk specimens exhibited weight gain that saturated exponentially with time, analogous to the oxidation behavior of reaction-bonded Si₃N₄. The saturation value of the weight gain increased linearly with specimen volume, suggesting the nanoscale pore surfaces oxidized uniformly throughout the specimen. This interpretation was confirmed by high-resolution electron microscopy and secondary ion mass spectroscopy. Experiments with the powders (having a particle size much larger than the scale of the nanopores) were also consistent with measurements of the disks. However, the powder specimens, having a high surface-to-volume ratio, continued to show measurable weight gain due to oxidation of the exterior surface. The wide range of values for the surface-to-volume ratio, which included all specimens, permitted a separation of the rate of oxidation of the free surface and the oxidation of the internal surfaces of the nanopores. Surface oxidation data were used to obtain the rate constant for parabolic growth of the oxidation scale. The values for the rate constant obtained for SiCN lay at the lower end of the spectrum of oxidation rates reported in the literature for several Si₃N₄ and SiC materials. Convergence in the behavior of SiCN and CVD-SiC is ascribed to the purity of both materials. Conversely, it is proposed that the high rates of oxidation of sintered polycrystalline silicon carbides and nitrides, as well as the high degree of variability of these rates, might be related to the impurities introduced by the sintering aids.     

A new composite of crystalline silicotitanate for sequestration of 137Cs and 90Sr from low-level aqueous waste solution

ABSTRACT

A new composite of crystalline silicotitanate (CST) has been synthesized for the sequestration of Cs and Sr from low-level liquid waste generated in the nuclear industry. The product characterization using X-RAY DEFRACTION (XRD) and Fourier-transform infrared spectroscopy (FTIR) confirmed the presence of CST crystals in the composite. Sorption studies carried out under various test conditions showed that the composite has high affinity for both Cs and Sr. Results of structural characterization of Cs and Sr-loaded CST indicated that the overall structural integrity remained intact after substitution of Na⁺ by Cs⁺ or Sr²⁺. The exceedingly good Cs and Sr sorption performance displayed by the CST composite will find applications in the treatment of nuclear waste.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

Synthesis and Characterization of Sulfanilamide-Based Nonionic Surfactants and Evaluation of Their Nano-Vesicular Drug Loading Application

Nonionic surfactants are highly stable and cost-effective and receiving acceptance for applications in many diverse fields including drug delivery, due to their distinctive properties. Here, we report on the synthesis and characterization of sulfanilamide-based nonionic surfactants for nanoscale vesicular drug loading applications. Nonionic surfactants were synthesized through alkylation of sulfanilamide with alkyl halides that possessed diverse degrees of lipophilicity. They were explored for their nanovesicular drug loading with Cefixime as a hydrophobic model drug. Drug-loaded nanovesicles were characterized for surface morphologies, size, size distribution, surface charge, and drug loading efficiency using atomic force microscopy (AFM), dynamic light scattering (DLS), and UV–visible spectrophotometry. All of the synthesized nonionic surfactants revealed their CMC values in 0.055–0.035 mM range depending upon the lipophilic chain length of surfactants. They caused a decreased hemoglobin release and low toxicity against cell culture. They self-assembled and loaded an increased amount of drug in the form of nanorange spherical shape niosomal vesicles. Results of the current study verify these synthesized nonionic surfactants are hemocompatible, nontoxic, and capable of self-assembling into nanorange niosomal vesicles. These niosomal vesicles can be suggested as safe and highly efficient nanocarriers for hydrophobic drug loading and delivery.     

Synthesis of amino-cosubstituted polyorganophosphazenes and fabrication of their nanoparticles for anticancer drug delivery

The development of safe drug carriers is cardinal in cancer therapy, which can target the cancer cells and release the loaded drug on-demand without damaging the healthy cells of the body. In our work, we synthesized three different biodegradable polymers, poly[(ethyl aminobezoate) (ethyl glycinato) phosphazenes] (PABGPs), in different mole ratio of side groups. The successful synthesis of these PABGPs was confirmed by ¹H NMR, ³¹P NMR, FT-IR, and gel permeation chromatography. These PABGPs were fabricated into drug (camptothecin, CPT, a hydrophobic anticancer drug) loaded nanoparticles. These drug-loaded nanoparticles showed good drug release behaviors under normal physiological conditions (pH 7.4 and temperature 37°C). These PABGPs-based nanoparticles may find their application as effective drug carriers for cancer therapy.     

Significantly high electromagnetic shielding effectiveness in polypyrrole synthesized by eco-friendly and cost-effective technique

A facile and eco-friendly synthesis of polypyrrole from monomer pyrrole using nominal amount of ferric chloride hexahydrate (FeCl₃.6H₂O) oxidant in aqueous solution by chemically oxidative polymerization method has been reported. The use of aqueous solvent and ferric chloride hexahydrate salt in polypyrrole synthesis have an eco-friendly route favorable for the production of polypyrrole in large quantities. The synthesized polypyrrole samples exhibit good electrical conductivity (2 S/cm) and yield of 80% for reaction time of 8 hr at 5°C. Quality and properties of polypyrrole samples have been thoroughly investigated with varying reaction time and temperature while other synthesis parameters like molar ratio of oxidant to monomer, oxidant concentration, and solvent were kept constant. X-ray diffraction analysis of polypyrrole with a shorter reaction time shows the presence of iron oxide (Fe₂O₃) peaks. The complete reaction may not occur at shorter reaction times due to which residual ferric ions converted into Fe₂O₃. X-ray photoelectron spectroscopy measurement of polypyrrole also confirms the formation of Fe₂O₃. Appropriate selection of reaction time and temperature produced pure phase polypyrrole with high yield and good conductivity. Synthesized polypyrrole by our eco-friendly and cost-effective technique exhibits prominent electromagnetic shielding effectiveness value of 30 dB in the X-band (8–12 GHz).     

The Photosensitising Clinical Agent Verteporfin Is an Inhibitor of SPAK and OSR1 Kinases

STE20/SPS1‐related proline/alanine‐rich kinase (SPAK) and oxidative‐stress‐responsive kinase 1 (OSR1) are two serine/threonine protein kinases that play key roles in regulating ion homeostasis. Various SPAK and OSR1 mouse models exhibited reduced blood pressure. Herein, the discovery of verteporfin, a photosensitising agent used in photodynamic therapy, as a potent inhibitor of SPAK and OSR1 kinases is reported. It is shown that verteporfin binds the kinase domains of SPAK and OSR1 and inhibits their catalytic activity in an adenosine triphosphate (ATP)‐independent manner. In cells, verteporfin was able to suppress the phosphorylation of the ion co‐transporter NKCC1; a downstream physiological substrate of SPAK and OSR1 kinases. Kinase panel screening indicated that verteporfin inhibited a further eight protein kinases more potently than that of SPAK and OSR1. Although verteporfin has largely been studied as a modifier of the Hippo signalling pathway, this work indicates that the WNK‐SPAK/OSR1 signalling cascade is also a target of this clinical agent. This finding could explain the fluctuation in blood pressure noted in patients and animals treated with this drug.     

Determining the state of a process control system: Current trends and future challenges

In many industrial plants, multiple, interconnected control loops are common. Their maintenance and improvement requires detailed controller performance assessment to determine not only whether they are behaving well, but also to determine the potential cause of any observed problems. Techniques for performance assessment can be divided into two broad categories (1) performance assessment of regulatory control loops; and (2) performance assessment of supervisory control loops that evaluate the economic performance of advanced control strategies, such as model predictive control (MPC). A comprehensive review of the literature on the industrial applications of performance assessment, as well as some of the currently available software, is also presented. © 2011 Canadian Society for Chemical Engineering