Correction to: Bismuth Yttrium Oxide (Bi3YO6), A New Electrode Material For Asymmetric Aqueous Supercapacitors

Journal of Inorganic and Organometallic Polymers and Materials - The original version of this article unfortunately contained mistakes. In line 9 of the abstract, 5% should read as 2%. The...     

Modelling 3-D cutting dynamics with neural networks

Identification of 3-D cutting dynamics requires an expensive experimental set-up and complicated analysis. Recently, time series methods were used to model cutting dynamics. This approach allows a simpler experimental set-uup and estimates the discrete transfer functions used for simulation and/or calculation of frequency domain characteristics of the system. In this paper, the use of neural networks is proposed to model the 3-D cutting dynamics. Neural networks can be trained using the same experimental set-up used for the time series methods. However, several time series models (for different cutting speeds) can be represented with a single neural network, and cutting forces can be studied for varying cutting speed conditions. Also, four neural networks were used to store the frequency domain characteristics of the thrust direction cutting force. In this study, the estimation errors for the neural networks were less than 7% of the defined range (the difference between the maximum and minimum of the data).     

Miscibility of oligomeric poly(dimethyl siloxanes) with long-chain unbranched alkanes: 2. Unsymmetrical cloud point curves

Previously obtained cloud point curves for mixtures of oligomeric poly(dimethyl siloxanes) (weight fraction W₁) with oligomeric polyethylenes have been supplemented by the use of samples of higher molecular weight. Initial flat regions at low-medium W₁ as well as a slight shoulder at extremely high W₁ are now considered to be due to crystallization, since the temperatures at which they occur are the melting points of the oligoethylenes. The actual cloud point curves were of an unsymmetrical dome shape, the form of which could not be simulated by using a concentration-independent interaction parameter g in the Flory-Huggins equation. However, spinodals calculated by assuming a quadratic dependence of g on composition were of the same shape as the experimental cloud point curves. The critical compositions calculated on this basis were also close to the experimental ones.     

Towards a distributed multi-agent framework for shared resources scheduling

Nowadays, manufacturers have to share some of their resources with partners due to the competitive economic environment. The management of the availability periods of shared resources causes a problem because it is achieved by the scheduling systems, which assume a local environment where all resources are on the same site. Therefore, distributed scheduling with shared resources is an important research topic. In this communication, we introduce the architecture and behaviour of DSCEP framework (Distributed, Supervisor, Customer, Environment, and Producer) under shared resources situation with disturbances. We are using a simple example of manufacturing system to illustrate the ability of DSCEP framework to solve the shared resources scheduling problem in complex systems.     

Eco‐friendly durable press finishing of cellulose‐containing fabrics

To impart easy‐care properties to cellulose‐containing fabrics along with avoiding any harmful effects of formaldehyde on both the health and the environment, attempts have been made to use citric acid (CA) as an ester crosslinking agent along with different catalytic systems in the absence and presence of certain additives. Further, fixation conditions, type of crosslinking agent, as well as type of substrate have been studied. Results revealed that the enhancement in carboxyl content, performance properties, and the decrease in tear strength (TS) as well as in whiteness indices (WI) of the finished fabric samples were increased by increasing CA concentration up to 80 g/L and by raising thermofixation temperature from 140 up to 180°C for 90 s. Inclusion of triethanolamine hydrochloride (TEA. HCl), decreased the carboxyl content, TS, color strength K/S, as well as oily stain release rating (SRR) of the finished fabric samples along with an increase in bound nitrogen (%N), wrinkle recovery angle WRA, and an improvement in WI without affecting the durable press rating (DP). Within the range examined (0–30 g/L), increasing PEG‐600 concentration improved the wet resiliency, TS, as well as WI properties of the finished samples. Increasing DMDHEU ratio in the CA/DMDHEU crosslinking system gave rise to an increase in %N, WRA (dry and wet), DP, as well as in free CH₂O of finished fabrics, along with a slight improvement in WI values. On the other hand, the TS, carboxyl content, K/S, SRR values of the finished fabric samples were lower at a higher DMDHEU ratio. Increase in carboxyl content, %N, WRA (dry and wet), DP and SRR, as well as extent of post dyeing (K/S) of the treated fabric samples upon using different ester crosslinking agents followed the descending order: citric acid > pyromellitic dianhydride. The opposite holds true for the TS, and WI values. Among the esterifying catalysts used, and for a given set of finishing conditions, NaH₂PO₂ · H₂O proved to be the most effective one, and the following order of effectiveness may be drawn: NaH₂PO₂ · H₂O > K₂HPO₄ > Na₃–citrate > Na₂–tartrate. Inclusion of silicone softener in the finishing formulation brought about an improvement in softeness degree, WRA, %N, DP, TS as well as K/S values along with a decrease in carboxyl content, SRR, and WI values of the treated fabric samples, regardless of the used silicone softener.The performance properties of the finished fabric samples were determined by the type and nature of the substrate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2243–2253, 2002     

Networked event-triggered control: an introduction and research trends

A physical system can be studied as either continuous time or discrete-time system depending upon the control objectives. Discrete-time control systems can be further classified into two categories based on the sampling: (1) time-triggered control systems and (2) event-triggered control systems. Time-triggered systems sample states and calculate controls at every sampling instant in a periodic fashion, even in cases when states and calculated control do not change much. This indicates unnecessary and useless data transmission and computation efforts of a time-triggered system, thus inefficiency. For networked systems, the transmission of measurement and control signals, thus, cause unnecessary network traffic. Event-triggered systems, on the other hand, have potential to reduce the communication burden in addition to reducing the computation of control signals. This paper provides an up-to-date survey on the event-triggered methods for control systems and highlights the potential research directions.     

Printing cotton fabrics with reactive dyes of high reactivity from an acidic printing paste

The behaviour of reactive dyes of high reactivity during the printing process of 100% cotton fabrics from an alkaline and acidic printing paste was studied in detail. The printing pastes were stored for different periods of time and then the fabrics were printed. The samples were subjected to two methods of fixation, the first by steaming and the second by thermofixation. The effects of different factors such as alkali and acid concentration, storage time of the printing pastes and method of fixation on the K/S values of the prints were investigated. The fastness properties of the printed areas were also measured to determine the improvement obtained by acidic printing with high-reactivity reactive dyes on cotton fabrics.     

Asymmetric Sharpless epoxidation of 13S‐hydroxy‐ 9Z, 11E‐octadecadienoic acid (13S‐HODE)

The asymmetric Sharpless epoxidation of methyl 13S‐hydroxy‐9Z, 11E‐octadeca‐dienoate (13S‐HODE, 1 ) with tert‐butyl hydroperoxide (TBHP) catalysed by titanium tetraisopropoxide {Ti(ⁱOPr)₄} in the presence of L(+)‐diisopropyl tartrate (L‐DIPT) gave methyl 13S‐hydroxy‐11S, 12S‐epoxy‐9Z‐octadecenoate 2 (erythro isomer) in 84% diastereomeric excess (de). The epoxidation of 1 with TBHP catalysed by Ti(ⁱOPr)₄ in the presence of D(‐)‐DIPT yielded methyl 13S‐hydroxy‐11RR12R‐epoxy‐9Z‐octadecenoate (threo isomer) 3 in 76% de.     

Interpretation of way-finding healthcare symbols by a multicultural population: Navigation signage design for global health

The interpretation of way-finding symbols for healthcare facilities in a multicultural community was assessed in a cross-sectional study. One hundred participants recruited from Al Ain city in the United Arab Emirates were asked to interpret 28 healthcare symbols developed at Hablamos Juntos (such as vaccinations and laboratory) as well as 18 general-purpose symbols (such as elevators and restrooms). The mean age was 27.6 years (16–55 years) of whom 84 (84%) were females. Healthcare symbols were more difficult to comprehend than general-purpose signs. Symbols referring to abstract concepts were the most misinterpreted including oncology, diabetes education, outpatient clinic, interpretive services, pharmacy, internal medicine, registration, social services, obstetrics and gynecology, pediatrics and infectious diseases. Interpretation rates varied across cultural backgrounds and increased with higher education and younger age. Signage within healthcare facilities should be tested among older persons, those with limited literacy and across a wide range of cultures.     

Internal structure of coalitions in competitive and altruistic graphical coalitional games

This paper introduces a certain graphical coalitional game where the internal topology of the coalition depends on a prescribed communication graph structure among the agents. The game Value Function is required to satisfy four Axioms of Value. These axioms make it possible to provide a refined study of coalition structures on graphs by defining a formal graphical game and by assigning a Positional Advantage, based on the Shapley value, to each agent in a coalition based on its connectivity properties within the graph. Using the Axioms of Value the graphical coalitional game can be shown to satisfy properties such as convexity, fairness, cohesiveness, and full cooperativeness. Three measures of the contributions of agents to a coalition are introduced: marginal contribution, competitive contribution, and altruistic contribution. The mathematical framework given here is used to establish results regarding the dependence of these three types of contributions on the graph topology, and changes in these contributions due to changes in graph topology. Based on these different contributions, three online sequential decision games are defined on top of the graphical coalitional game, and the stable graphs under each of these sequential decision games are studied. It is shown that the stable graphs under the objective of maximizing the marginal contribution are any connected graph. The stable graphs under the objective of maximizing the competitive contribution are the complete graph. The stable graphs under the objective of maximizing the altruistic contribution are any tree.