User disposition and extent of Web utilization: A trait hierarchy approach

As it evolves, the World Wide Web (the Web) increasingly reveals the potential to enhance new aspects of our daily lives. While some take full advantage of the Web's diverse and cutting edge offerings, others choose to limit the extent of their utilization to a small subset of the Web's available functions. Recognizing this variation, a growing body of research investigates the drivers of usage behavior on the Web. Individual differences, namely broad personality and IT-specific traits, are highlighted within this stream as important predictors of Web use. Although substantial progress has been made, an important issue still facing trait research in this area is the absence of a theory-grounded basis for inter-relating broad personality and IT-specific traits. As a result, the accumulation of extant trait research is characterized by a disjointed assortment of trait constructs lacking clear theoretical linkages with one another. Additionally, while numerous studies have investigated isolated Web usage behaviors, an important outcome that remains under-investigated is the extent of an individual's utilization of the Web overall. Addressing these issues, the current study leverages the hierarchical view of traits to develop a theory-grounded, integrative model of broad personality and IT-specific traits. After developing the hierarchical model, the integrated network of traits is positioned as a direct antecedent of Web utilization and empirically tested via a two-stage field survey of 230 Web users. The results corroborate most of the hypotheses, providing support for the hierarchical view and extending the knowledge base on Web-user behavior. Overall, this study unifies disjointed personality and IT-specific trait constructs and offers theoretical guidance for future studies, introducing a much-needed ground for cumulative tradition within this stream.     

Development of an evaluation method for quantitative driveability in heavy-duty vehicles

Subjective evaluations by experienced test drivers are primarily used to assess the driveability of vehicles in automotive companies. However, these evaluations are limited in terms of repeatability, incur costs, and require much time. Therefore, this study introduces a method of quantitatively evaluating the driveability of heavy-duty vehicles to circumvent these limitations. A vehicle experiment is conducted to measure data from an electronic control unit and an accelerometer to assess the driveability of heavy-duty vehicles. The evaluation indices for driveability are selected from previous studies on the objective and subjective methods of evaluating driveability according to various driving conditions. The indices include engine start, idle, acceleration, deceleration, constant speed, and start-up driving conditions. This research presents a quantitative evaluation method using the calculated values of each index and the correlated weighting factors of indices obtained from the regression analysis of the subjective evaluations. The driveability of heavy-duty vehicles is quantitatively evaluated under various driving conditions based on the proposed method. Results of the quantitative evaluation are similar to those of the subjective evaluations, and the proposed method is determined applicable in evaluating the driveability of heavy-duty vehicles.     

A joint normalcy index to evaluate patients with gait pathologies in the functional aspects of joint mobility

Gait analysis using 3D motion capture systems provides joint kinematic and kinetic analysis results such as joint relative angles and moments that can be use used to evaluate the degrees of pathological gait patterns. However, the complex data produced using these 3D motion capture systems can only analyzed by experts, because the gait analysis is highly coupled to the kinematics of each joint. Therefore, several Several previous studies using gait analysis have relied on the data compression technique to represent gait deviation from the average normal profiles as a single value. Even though it is important to evaluate gait pathologies at the joint level, all these previous studies have just used a single value to evaluate the pathological gait pattern. Using just one variable for evaluation of a gait is limited in terms of determining which joint movement patterns are getting better during rehabilitation. Therefore, in this study, a method suitable for evaluating gait deviation during a gait was developed to provide three indices for the hip, knee and ankle joints. In addition, to validate the proposed method in clinical cases, experimental tests were conducted on thirty thirty-six normal walkers and six patients with cerebral palsy. Furthermore, to validate the proposed method in regards to rehabilitation, experimental tests were conducted on three classified walking groups with imposed ankle equinus constraints. The JNI for the hip joint, knee joint and ankle were 8.78 (±3.70), 2.92 (±3.25) and 8.79 (±4.38), respectively, in the normal walking group. However, these values were significantly different for the pathological walking group with cerebral palsy. The JNI of the hip joint, knee joint and ankle joint were 203.73 (±171.59), 81.23 (±52.13) and 248.39 (±149.99), respectively, for this group. There were also differences between any two of the three classified groups with imposed ankle equinus constraints. In particular, the JNI of the ankle joint was statistically different at the p<0.01 level, and this parameter clearly increased as the degree of the imposed ankle equinus was increased. These results demonstrate that the proposed JNI can be used as a scalar factor to evaluate the angular deviation of each joint in normal and patient groups. In addition, this approach can be adapted to evaluate rehabilitation and pre/post surgery.     

A provably secure and efficient two‐party password‐based explicit authenticated key exchange protocol resistance to password guessing attacks

Password‐based two‐party authenticated key exchange (2PAKE) protocol enables two or more entities, who only share a low‐entropy password between them, to authenticate each other and establish a high‐entropy secret session key. Recently, Zheng et al. proposed a password‐based 2PAKE protocol based on bilinear pairings and claimed that their protocol is secure against the known security attacks. However, in this paper, we indicate that the protocol of Zheng et al. is insecure against the off‐line password guessing attack, which is a serious threat to such protocols. Consequently, we show that an attacker who obtained the users' password by applying the off‐line password guessing attack can easily obtain the secret session key. In addition, the protocol of Zheng et al. does not provide the forward secrecy of the session key. As a remedy, we also improve the protocol of Zheng et al. and prove the security of our enhanced protocol in the random oracle model. The simulation result shows that the execution time of our 2PAKE protocol is less compared with other existing protocols. Copyright © 2015 John Wiley & Sons, Ltd.     

ESR Study of the Singlet Oxygen Quenching and Protective Activity of Trolox on the Photodecomposition of Riboflavin and Lumiflavin in Aqueous Buffer Solutions

ABSTRACT:  Singlet oxygen quenching activity of Trolox, a water-soluble derivative of tocopherol, was studied by electron spin resonance (ESR) spectroscopy in a buffer solution (pH 7.4) containing methylene blue (MB), 2,2,6,6-tetramethyl-4-piperidone (TMPD) after light illumination for 30 min. Trolox at the concentration of 125 μM quenched 89.1% singlet oxygen in the system. Trolox showed significantly higher singlet oxygen quenching activity than ascorbic acid in the buffer solution ( P  < 0.05). Riboflavin in phosphate buffer solutions was degraded very fast under fluorescent light illumination. The photodegradation rate of riboflavin at pH 8.5 was significantly higher than pHs 4.5 and 6.5 ( P  < 0.05). Lumiflavin was also degraded under the fluorescent light illumination, but its degradation rate was much lower than that of riboflavin under the same light intensity. Unlike riboflavin, the rate of lumiflavin photodegradation was the greatest at pH 4.5 and followed by pHs 6.5 and 8.5, in a decreasing order. Trolox greatly protected the photodegradation of riboflavin and lumiflavin. The protective activities of Trolox against the photodegradation of riboflavin and lumiflavin were also pH dependent. The treatments of 5 mM Trolox in the buffer solutions of pHs 8.5 and 6.5 exhibited 56.1% and 31.7% protection of riboflavin against degradation during 120 min light illumination, respectively. The treatments of Trolox at the concentrations of 1, 3, and 5 mM in the buffer of 6.5 exhibited 14.8%, 58.4%, and 81.4% protection of lumiflavin against degradation during 24 h light illumination, respectively.     

Comparative Analysis of Single‐Cascade Five‐Zone and Two‐Zone SMB Systems for the Separation of a Ternary Amino Acid Mixture

A ternary separation usually requires the use of two simulated moving bed (SMB) units in series. Since an increase in the number of SMB units leads to a significant increase in capital and operational costs, the use of a single SMB unit is preferred if its structure can be modified to treat a ternary separation. Such a modified single SMB unit has been typified by a five‐zone SMB or a two‐zone SMB so far. The separation performances‐of a five‐zone SMB and a two‐zone SMB are compared in this paper by using the ternary amino acid mixture as a model system. A five‐zone SMB is designed with the safety margin method while a two‐zone SMB is optimized using genetic algorithm. A five‐zone SMB based on the maximum allowable safety margin, although it may not guarantee the global optimum solution, results in much better separation performance than a two‐zone SMB at its global optimum state.     

Stability of tungsten oxide nanotubes film for improving photocatalytic oxidation reaction

Well-aligned anodic tungsten oxide (WO₃) nanotubes with lengths approaching 600 nm was successfully synthesised via electrochemical anodisation of tungsten (W) film at 40 V in a bath with electrolyte (pH 3) consisted of 1 M of sodium sulphate (Na₂SO₄) and 0.7 wt-% ammonium fluoride (NH₄F) for 15 min. It was found that the production of dense compact oxide layer on pure W film could be explained with high concentration of H⁺ ions accelerated the hydrolysis ability on the W surface to form thick WO₃ layer under acidic condition (pH: 3). The photocatalytic activity performance was increased by ≈15% for the dense WO₃ nanostructures film as compared to the thin and irregular WO₃ nanostructures film because of the high active surface area to absorb more photons from solar irradiation for triggering the charge carriers separation and then improvement of internal and external diffusion of the reactants.     

SARS-CoV-2 Spike Protein and Mouse Coronavirus Inhibit Biofilm Formation by Streptococcus pneumoniae and Staphylococcus aureus

The presence of co-infections or superinfections with bacterial pathogens in COVID-19 patients is associated with poor outcomes, including increased morbidity and mortality. We hypothesized that SARS-CoV-2 and its components interact with the biofilms generated by commensal bacteria, which may contribute to co-infections. This study employed crystal violet staining and particle-tracking microrheology to characterize the formation of biofilms by Streptococcus pneumoniae and Staphylococcus aureus that commonly cause secondary bacterial pneumonia. Microrheology analyses suggested that these biofilms were inhomogeneous soft solids, consistent with their dynamic characteristics. Biofilm formation by both bacteria was significantly inhibited by co-incubation with recombinant SARS-CoV-2 spike S1 subunit and both S1 + S2 subunits, but not with S2 extracellular domain nor nucleocapsid protein. Addition of spike S1 and S2 antibodies to spike protein could partially restore bacterial biofilm production. Furthermore, biofilm formation in vitro was also compromised by live murine hepatitis virus, a related beta-coronavirus. Supporting data from LC-MS-based proteomics of spike–biofilm interactions revealed differential expression of proteins involved in quorum sensing and biofilm maturation, such as the AI-2E family transporter and LuxS, a key enzyme for AI-2 biosynthesis. Our findings suggest that these opportunistic pathogens may egress from biofilms to resume a more virulent planktonic lifestyle during coronavirus infections. The dispersion of pathogens from biofilms may culminate in potentially severe secondary infections with poor prognosis. Further detailed investigations are warranted to establish bacterial biofilms as risk factors for secondary pneumonia in COVID-19 patients.     

A team formation model based on knowledge and collaboration

Appointing a good leader to the position of team manager and having competent workers collaborate as team members is a key to success in business activities of an enterprising institution. The traditional methodologies of human resource management have defined the required abilities for team managers and team members, and evaluated those abilities of employees. However, it is difficult to consider those abilities systematically in practice. In addition, the current management paradigm undergoes rapid transitions into knowledge management. In step with these trends, this study presents a framework for analyzing the knowledge of the candidates for managers and team members for the new team, and proposes a genetic algorithm and social network measures for choosing a team manager and team members. A prototype was built for testing the feasibility of the model. The testing data are from an R&D institute’s human resource management department. The results show that our proposed approach is a quantitative and systematic method for selecting proper personnel for appropriate teams.     

Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements

This paper describes the results of laboratory and full-scale performance tests for a high durability asphalt binder (HDAB) and high durability asphalt mixture (HDAM) applicable to the wearing course in a bridge deck system. The HDAB was developed using a styrene–butadiene–styrene (SBS) modifier and hydrocarbon for improving construction workability and resistance to fatigue cracking. Various binder tests were conducted on the HDAB, and test results showed that the resistance to fatigue and low temperature cracking of the HDAB increased significantly compared to that of the PG 64-22 and PG 76-22 binders. For the mixtures, the fatigue test results showed that the HDAM has a three times longer fatigue life than the SBS-modified asphalt mixture. It was also found that the HDAM has a higher resistance against moisture-induced damage. Results from full-scale accelerated testing on the bridge deck pavement system proved that the HDAM can significantly improve pavement performance.