Charge Generation and Photovoltaic Operation of Solid‐State Dye‐Sensitized Solar Cells Incorporating a High Extinction Coefficient Indolene‐Based Sensitizer

An investigation of the function of an indolene‐based organic dye, termed D149, incorporated in to solid‐state dye‐sensitized solar cells using 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxypheny‐amine)‐9,9′‐spirobifluorene (spiro‐OMeTAD) as the hole transport material is reported. Solar cell performance characteristics are unprecedented under low light levels, with the solar cells delivering up to 70% incident photon‐to‐current efficiency (IPCE) and over 6% power conversion efficiency, as measured under simulated air mass (AM) 1.5 sun light at 1 and 10 mW cm^?2. However, a considerable nonlinearity in the photocurrent as intensities approach “full sun” conditions is observed and the devices deliver up to 4.2% power conversion efficiency under simulated sun light of 100 mW cm^?2. The influence of dye‐loading upon solar cell operation is investigated and the thin films are probed via photoinduced absorption (PIA) spectroscopy, time‐correlated single‐photon counting (TCSPC), and photoluminescence quantum efficiency (PLQE) measurements in order to deduce the cause for the non ideal solar cell performance. The data suggest that electron transfer from the photoexcited sensitizer into the TiO₂ is only between 10 to 50% efficient and that ionization of the photo excited dye via hole transfer directly to spiro‐OMeTAD dominates the charge generation process. A persistent dye bleaching signal is also observed, and assigned to a remarkably high density of electrons “trapped” within the dye phase, equivalent to 1.8 × 10¹⁷ cm^?3 under full sun illumination. it is believed that this localized space charge build‐up upon the sensitizer is responsible for the non‐linearity of photocurrent with intensity and nonoptimum solar cell performance under full sun conditions.     

Evaluation of antioxidative activity of vegetable extracts in linoleic acid emulsion and phospholipid bilayers

The antioxidative effects of vegetable extracts were evaluated using linoleic acid emulsion and liposomal phospholipid suspension systems. First, the antioxidative activities of water, ethanol and 2% metaphosphoric acid extracts of the vegetables were investigated by measuring the rate of oxygen consumption in the peroxidation of linoleic acid initiated by a radical generator, 2,2′-azobis(2-amidinopropane) dihydrochloride (AAPH), with a Clark electrode in the absence of metal chelators. Ethanol extracts of moroheiya and perilla exhibited the highest antioxidative activities. Without metal chelators, 12 ethanol extracts and one water extract acted as prooxidants, and this phenomenon could be attributed to the prooxidant action of ascorbic acid in the presence of free transition metal ions. Next, peroxyl radical-scavenging activities of vegetable extracts were examined by adding a metal chelator, diethylenetriaminepentaacetic acid (DTPA), to the linoleic acid emulsion system. The results were compared with their antioxidative activities in phospholipid bilayers by measuring the inhibition of lipid peroxidation in large unilamellar vesicles composed of egg yolk phosphatidylcholine (PC). A good correlation was observed between the antioxidative activities obtained from these two systems. The antioxidative activities in the liposomal phospholipid suspension system correlated with total contents of ascorbic acid and polyphenols in vegetable extracts. © 1999 Society of Chemical Industry     

Recovery of 80 GHz optical clock from 160 Gbit/s data using regeneratively modelocked laser diode

An 80 GHz optical clock signal was successfully recovered from a 160 Gbit/s data stream using a regeneratively modelocking scheme of a semiconductor modelocked laser (MLLD). To handle an 80 GHz electrical signal, the MLLD integrated with a high-mesa electroabsorption modulator and a W-band UTC-PD module are used in this scheme.     

Solution‐Processed Silicane Field‐Effect Transistor: Operation Due to Stacking Defects on the Channel

2D silicon nanomaterials have unique potential for use in applications owing to their many different exotic electronic properties. Field‐effect transistors are fabricated based on free‐standing silicanes through a solution process. Owing to the sensitive surface and the nanometer thickness, the devices require the use of fabrication conditions similar to those of lithium‐ion batteries to prevent oxidation of the sheets. Reliable transistor performance is observed at room temperature in a channel thinner than 3 nm, as drain voltage dependent transfer curves current modulation, depending on the edge effect of the silicane, although the transistor property is modest (hole mobility of 1.8 cm² V^?1 s^?1). The results suggest the feasibility of other air‐sensitive 2D nanomaterials for applications in nanoelectronic devices.     

Photonic generation of millimetre- and submillimetre-waves using rectangular-waveguide-output uni-travelling-carrier photodiode module

The generation of millimetre- and submillimetre-waves by uni-travelling-carrier photodiode module with WR-8 output port is investigated in a frequency range of up to 800 GHz. A steep decrease of the output power with increasing frequency is observed, implying that an additional loss in the electrical waveguide has a considerable influence.     

Inhibiting Surface Diffusion to Synthesize 3D Bicontinuous Nanoporous N-Doped Carbon for Boosting Oxygen Reduction Reaction in Flexible All-Solid-State Al-Air Batteries

Catalyzing oxygen reduction reaction (ORR) and accelerating oxygen diffusion are two key challenges for the requirements of the cathode catalysts in the metal-air batteries. A promising strategy for improving both ORR performance and mass diffusion simultaneously is to build carbon-based catalysts with ORR-active chemical dopants and 3D interconnected porosity. Herein, a 3D nanoporous N-doped carbon with bicontinuous porosity and interconnected open-pore channels is reported, which is prepared by a polyaniline-assisted template method. The polyaniline can efficiently inhibit the surface diffusion-caused template coarsening, achieving a small pore size of 35 nm. The small porous morphology gives rise to a high N-dopant concentration up to 7.20 at.%, which in turn exhibits a commercial Pt/C-comparable ORR performance together with satisfied durability in alkaline media. Using these nanoporous carbon catalysts as air electrodes, an all-solid-state flexible Al-air battery is assembled with the measured maximum power density reaching 130.5 mW cm⁻², as compared to 106.2 mW cm⁻² when the commercial Pt/C standard is used. This study provides an efficient method to synthesize 3D N-doped carbon with bicontinuous nano-sized pore channels for wide-ranging applications in portable and flexible devices.     

Development of a 385–500 GHz Sideband-Separating Balanced SIS Mixer

A submillimeter (385–500 GHz) low-noise sideband-separating balanced SIS (Superconductor Insulator Superconductor) mixer (Balanced 2SB mixer) with high IRR (Image Rejection Ratio) has been successfully developed, whose SSB (Single SideBand) noise temperature is ～ 200 K (10hf/k) with an image rejection ratio of ≥?～10 dB. Balanced mixers have become a promising technology which would break through the limitation especially in terahertz receivers and heterodyne arrays. However, though there are examples in microwave with relatively worse noise performance, submillimeter and terahertz balanced mixers have rarely been developed in spite of their astronomical importance. The developed balanced 2SB mixer is not only the first one demonstrated at submillimeter frequency range, but also has very low noise, high IRR, wide detectable frequencies (385–500 GHz), and a flat IF output spectrum. The balanced 2SB mixer is composed of three RF hybrids, four DSB (Double SideBand) mixers, two 180° IF hybrids, and an IF quadrature hybrid. Several important performance indicators such as noise temperature, IRR, required LO (Local Oscillator) power, and IF spectra were measured. The measured LO power required for the balanced 2SB mixer was typically ~ 14 dB less than that of the single-ended mixers.     

An optimal inspection policy for a storage system with high reliability

A system such as missiles and spare parts of aircrafts has to perform a normal operation at any time when it is used. However, a system is in storage for a long time from the transportation to the usage and its reliability goes down with time. Such a system should be inspected and maintained at periodic times to hold a higher reliability than a prespecified value q. This paper suggests a periodic inspection of a storage system with two kinds of units where unit 1 is inspected and maintained at each inspection, however, unit 2 is not done. The system is replaced at detection of failure or at time when the reliability is below q. The total expected cost until replacement is derived and an optimal inspection time which minimizes it is discussed. Numerical examples are given when failure time distributions are exponential and Weibull ones.     

Dual-band circularly polarized equilateral triangular-patch array antenna for mobile satellite communications

The Japan Aerospace Exploration Agency will launch the Engineering Test Satellite VIII (ETS-VIII) in 2006 to support the next generation of mobile satellite communications covering the area of Japan (beam coverage El=38/spl deg/ to 58/spl deg/). In this paper, a satellite-tracking left-handed circularly polarized triangular-patch array antenna is developed for ground applications. The targeted minimum gain of the antenna is set to 5 dBic at the central elevation angle (El=48/spl deg/), in the Tokyo area, for applications using data transfer of around a hundred kbps. The antenna is composed of three equilateral triangular patches for both reception and transmission units operating at 2.50 and 2.65 GHz frequency bands, respectively. The antenna was simulated by method of moments (MoM) analysis, and measurement of the fabricated antenna was performed to confirm the simulation results. The measurement results show that the frequency characteristics and the 5-dBic gain coverage in the conical-cut plane of the fabricated antenna satisfy the specifications for ETS-VIII. A prototype of the proposed antenna system is employed in outdoor experiments using a pseudosatellite and shows good performance from El=38/spl deg/ to 58/spl deg/.     

Spatiotemporal Magnetocaloric Microenvironment for Guiding the Fate of Biodegradable Polymer Implants

The degradation behavior of implants is significantly important for bone repair. However, it is still unprocurable to spatiotemporally regulate the degradation of the implants to match bone ingrowth. In this paper, a magneto-controlled biodegradation model is established to explore the degradation behavior of magnetic scaffolds in a magnetothermal microenvironment generated by an alternating magnetic field (AMF). The results demonstrate that the scaffolds can be heated by magnetic nanoparticles (NPs) under AMF, which dramatically accelerated scaffold degradation. Especially, magnetic NPs modified by oleic acid with a better interface compatibility exhibit a greater heating efficiency to further facilitate the degradation. Furthermore, the molecular dynamics simulations reveal that the enhanced motion correlation between magnetic NPs and polymer matrix can accelerate the energy transfer. As a proof-of-concept, the feasibility of magneto-controlled degradation for implants is demonstrated, and an optimizing strategy for better heating efficiency of nanomaterials is provided, which may have great instructive significance for clinical medicine.