Preparation of activated graphene and effect of activation parameters on electrochemical capacitance

Activation parameters such as temperature and the amount of potassium hydroxide (KOH) were varied during the synthesis of activated microwave-exfoliated graphite oxide (a-MEGO) and the effects of these parameters on the specific surface area of a-MEGO and electrochemical capacitance of a-MEGO electrodes were investigated. At 800 °C and a KOH/MEGO mass ratio of 6.5, a maximum specific surface area of 3100 m²/g was obtained and a high specific capacitance of 172 F/g (at 1 A/g constant current and 3.5 V maximal voltage) was measured in a two-electrode cell with a-MEGO electrodes in an organic electrolyte.     

Experimental investigations on high temperature transition of asphalt

Asphalt exhibits Newtonian, non-Newtonian and viscoelastic behavior as the temperature is varied. This investigation reports the temperature at which asphalt exhibits non-Newtonian to Newtonian transition. Air blown, blended asphalt and petroleum pitch were tested at different aging conditions. The temperature at which the material exhibited shear rate independent viscosity was taken as the transition temperature. The transition temperature varied with processing method and aging conditions. It was seen that blended asphalt exhibited greater increase in apparent viscosity during aging when compared to air blown asphalt, whereas air blown asphalt showed greater shift in transition temperature for the same aging conditions.     

A test of independence based on a generalized correlation function

In this paper, we propose a novel test of independence based on the concept of correntropy. We explore correntropy from a statistical perspective and discuss its properties in the context of testing independence. We introduce the novel concept of parametric correntropy and design a test of independence based on it. We further discuss how the proposed test relaxes the assumption of Gaussianity. Finally, we discuss some computational issues related to the proposed method and compare it with state-of-the-art techniques.     

Electrodeposition and properties of nanocrystalline ZnO films prepared in the presence of anionic surfactant SDS and ionic liquid 1-butyl-3-methylimidazolium methylsulfate

ZnO thin films were potentiostatically electrodeposited on transparent tin oxide conducting glass substrates at ?1.0 V (vs. Ag/AgCl) in the presence of anionic surfactant, sodium dodecyl sulphate (SDS) and hydrophobic ionic liquid, 1-butyl-3-methylimidazolium methylsulfate [bmim][CH₃SO₄]. X-ray diffraction (XRD) investigation confirm the formation of nanocrystalline and stoichiometric ZnO thin films. Scanning electron microscopy (SEM) results reveal that the grain size of the deposited ZnO film is reduced from 85 to 28 nm when small amount of ionic liquid is added to the deposition bath. Photoluminescence study at room temperature shows a clear absorption edge in the ultra violet (UV) region confirming the high quality, nanocrystalline and stoichiometric nature of the deposited ZnO films.     

Structural analysis of p185c-neu and epidermal growth factor receptor tyrosine kinases: oligomerization of kinase domains

The epidermal growth factor receptor (EGFR) and p185c-neu proteins associate as dimers to create an efficient signaling assembly. Overexpression of these receptors together enhances their intrinsic kinase activity and concomitantly results in oncogenic cellular transformation. The ectodomain is able to stabilize the dimer, whereas the kinase domain mediates biological activity. Here we analyze potential interactions of the cytoplasmic kinase domains of the EGFR and p185c-neu tyrosine kinases by homology molecular modeling. This analysis indicates that kinase domains can associate as dimers and, based on intermolecular interaction calculations, that heterodimer formation is favored over homodimers. The study also predicts that the self-autophosphorylation sites located within the kinase domains are not likely to interfere with tyrosine kinase activity, but may regulate the selection of substrates, thereby modulating signal transduction. In addition, the models suggest that the kinase domains of EGFR and p185c-neu can undergo higher order aggregation such as the formation of tetramers. Formation of tetrameric complexes may explain some of the experimentally observed features of their ligand affinity and hetero-receptor internalization.     

Characteristics of brush plated ZnTe thin films

Zinc telluride thin films were deposited by the brush plating technique at a potential of −0.90 V (SCE) on conducting glass and titanium substrates at different temperatures in the range 30–90°C. The films were polycrystalline in nature with peaks corresponding to the cubic phase. Direct band gap of 2.30 eV was observed. XPS studiers indicated the formation of ZnTe. Depth profiling studies indicated a uniform distribution of Zn and Te throughout the entire thickness. EDAX measurements were made on the films and it was found that there was a slight excess of Te.     

CdS microflowers and interpenetrated nanorods grown on Si substrate: Structural,optical properties and growth mechanism

CdS semiconductor with different morphologies have been achieved by simple thermal evaporation of CdS powder at 1050 °C in a flowing Ar atmosphere. The products were characterized by X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy and Photoluminescence. microflowers and interpenetrative nanorods of CdS were formed on catalyst free Si wafers at a temperature of 700 °C and 600 °C respectively. The flower like structures are composed of many interleaving nanorods which have the uniform diameter of about 700 nm and a well crystalline structure with [0001] as growth direction. The interpenetrative nanorods are found to be bounded with six side facets. X-ray diffraction studies revealed the hexagonal structure in both the products. The formation mechanism of microflowers and interpenetrated nanorods was discussed on the basis of nucleation growth kinetics. Room temperature photoluminescence spectra showed a strong green emission band (at ∼510 nm) from the CdS flower like structures, but on the other hand a red emission shoulder along with strong green emission band was observed for interpenetrative nanorods. These CdS micro/nanostructures with abundant morphologies may find applications in various micro/nanodevices, and the kinetics-driven morphology might be exploited to synthesize similar structures of other functional II–VI semiconductors.     

Brush plated copper indium sulphide films and their properties

Copper indium sulphide films were deposited for the first time by the brush plating technique at different electrolyte temperatures in the range of 30–80 °C and at a constant deposition current density of 5.0 mA cm^?2. The Films exhibited single phase copper indium sulphide. The grain size increased with increase of electrolyte temperature. Optical band gap of the films varied in the range of 1.30–1.42 eV. Atomic force microscopy studies indicated that the grain size vary from 600 to 1,000 nm, with increase of substrate temperature. Solar cells fabricated with the films exhibited V_oc of 650 mV, J_sc of 19.5 mA cm^?2, ff of 0.73 and efficiency of 9.50 %.     

Optical properties of pulse plated SnSe films

SnSe films were pulse electrodeposited on tin oxide coated glass substrates at different duty cycles. The films were single phase with orthorhombic structure. Optical absorption measurements indicated a band gap in the range of 1.28–1.50 eV with decrease of duty cycle. Transmission spectra exhibited interference fringes. Using the envelope method, refractive index was calculated. From the refractive index and extinction coefficient data, real and imaginary part of dielectric constant were estimated. Optical conductivity was evaluated from the absorption coefficient and refractive index data. Optical data were analysed by the single-effective oscillator model.