Hyperspectral imaging as an effective tool for prediction the moisture content and textural characteristics of roasted pistachio kernels

The objective of this study was to develop calibration models for prediction of moisture content and textural characteristics (fracture force, hardness, apparent modulus of elasticity and compressive energy) of pistachio kernels roasted in different conditions (temperatures 90, 120 and 150 °C; times 20, 35 and 50 min and air velocities 0.5, 1.5 and 2.5 m/s) using Vis/NIR hyperspectral imaging and multivariate analysis. The effects of different pre-processing methods and spectral treatments such as normalization [multiplicative scatter correction (MSC), standard normal variate transformation (SNV)], smoothing (median filter, Savitzky–Golay and Wavelet) and differentiation (first derivative, D¹ and second derivative, D²) on the obtained data were investigated. The prediction models were developed by partial least square regression (PLSR) and artificial neural network (ANN). The results indicated that ANN models have higher potential to predict moisture content and textural characteristics of roasted pistachio kernels comparing to PLSR models. High correlation was observed between reflectance data and fracture force (R²?=?0.957 and RMSEP?=?3.386) using MSC, Savitzky–Golay and D¹, compressive energy (R²?=?0.907 and RMSEP?=?15.757) using the combination of MSC, Wavelet and D¹, moisture content (R²?=?0.907 and RMSEP?=?0.179) and apparent modulus of elasticity (R²?=?0.921 and RMSEP?=?2.366) employing combination of SNV, Wavelet and D¹, respectively. Moreover, Vis–NIR data correlated well with hardness (R²?=?0.876 and RMSEP?=?5.216) using SNV, Wavelet and D². These results showed the capability of Vis/NIR hyperspectral imaging and the central role of multivariate analysis in developing accurate models for prediction of moisture content and textural properties of roasted pistachio kernels.     

Sweet lemon mechanical damage detection using image processing technique and UV radiation

Non-destructive measurement of qualitative parameters of agricultural produce is quite beneficial in the postharvest operations. The consequential effect of mechanical damage in citrus fruits is rarely visible in their appearance compared to other commodities. The purpose of this study was to propose a fast, non-destructive method for sweet lemon mechanical damage detection using image processing technique and UV radiation. For this purpose, 135 sweet lemons were tested based on a completely randomized factorial design. In order to examine mechanical damage, the independent variables included drop height, fruit diameter and tempering period (holding time at room temperature after treatment). Fruits were dropped from heights of 2, 2.5 and 3 m onto the ground. Then images were captured under UV light having a wavelength of 365 nm, 1, 3 and 6 days after treatment. The images were sent to a PC and analyzed using MATLAB software. “Green Spot Index” or GSI was defined to show the extent of mechanical damage. Results of the analysis of variance showed that the percentage of green spots on fruit skin is significant at the 1% level considering the main and double interaction effects of drop height and fruit diameter. Green spot index significantly increases with the level of mechanical damage. Accuracy of the developed method in differentiating the bruised and undamaged fruits was found to be 100%.     

A novel potentiometric pH electrode based on sulfated natural Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and analytical application in food samples

A novel solid state potentiometric pH electrode based on sulfated natural Fe₃O₄ silicone was fabricated. The optimum potentiometric performances such as Nernstian response, response time, selectivity, life-time and reproducibility of pH electrodes were investigated by using a computer-controlled potentiometric device. Moreover, the potentiometric performance of the solid state pH electrodes was studied with different mixtures sulfated natural Fe₃O₄, silicone and graphite powder. The best potentiometric behavior of proposed pH electrode was obtained with a composition of 20% (w/w) sulfated natural Fe₃O₄, 40% (w/w) graphite powder and 40% (w/w) silicone. The sub-Nernstian response for pH electrode was exhibited with a slope of 30.8?±?1.4 mV/pH (r?=?0.9963) from pH 2 to pH 12. In addition, the dynamic response time was found as 10 s in acidic medium and further the proposed pH electrode can be used for at least 1 year without any significant slope of the pH–potential curve. The selectivity coefficient of pH electrode was interpreted according to fixed interference method in the presences of Na⁺, Li⁺, K⁺, NH₄⁺, SO₄^2?, CH₃COO^? and NO₃^? ions. The reproducibility of pH electrode was calculated in pH 4 and pH 6 phosphate buffers and it was found as 0.24 RSD (%) and 0.27 RSD (%) respectively. The proposed pH electrode was used to determine of pH in acid?bases titration compared with glass pH electrode and is highly stable in corrosive systems including HF solution. Terminally, the pH value was successfully determined in some soft drinks and milk samples by proposed solid state pH electrode at 95% confidence level with satisfactory agreement compared with glass pH electrode.     

Antioxidant and anticholinesterase activity of essential oils and ethanol extracts of <Emphasis Type="Italic">Thymus algeriensis</Emphasis> and <Emphasis Type="Italic">Teucrium polium</Emphasis> from Algeria

This study aimed to investigate the cholinesterase (ChE) inhibitory and antioxidant activities of essential oil (EO) and ethanolic extract (EE) of two Lamiaceae medicinal plants from Algeria: Thymus algeriensis Boiss. & Reut. and Teucrieum polium subsp capitatum. The chemical composition of EOs analyzed by GC and GC–MS revealed the presence of carvacrol (43.2%), p-cymene (18.7%) and γ-terpinene (14.8%) as major compounds in T. algeriensis, while germacrene D (25.0%), bicyclogermacrene (10.4%), β-pinene (11.3%) and spathulenol (5.8%) were the most important components in T. polium oil. The best inhibitory activity on acetylcholinesterase (AChE) was exhibited by the EO of T. algeriensis. On the other hand, T. polium oil was more efficient against butyrylcholinesterase (BChE) than against AChE, whereas EEs showed weak or no inhibitory effect, particularly against AChE. Antioxidant activity was evaluated by β-carotene bleaching, ferric and cupric reducing powers and inhibition of ABTS^?+, DPPH^? and superoxide radicals. EOs showed different antioxidant trends depending on the assay used while ethanol extracts had high activity with all tests.     

Effect of modified starch from sweet potato as a fat replacer on the quality of reduced fat ice creams

In the present study, application of different levels (0, 1 and 2%) of citric acid treated sweet potato starch as a fat replacer (FR) in a high (11% fat), medium (6% fat) and low-fat (1%) ice creams were investigated. Results indicated that hardness value tends to improve with the addition of 1% FR in all reduced fat ice creams. During 60 days of storage, a decreasing trend was noticed in overrun, acidity and hardness values of ice cream samples. Overall score of sensory conveyed that the reduced fat ice creams with 1% FR (medium fat ice cream and low fat ice cream) were found to be very acceptable by sensory panels with a similar physicochemical characteristics and acceptance as high-fat ice cream (control) at the end of storage period. Citric acid treated sweet potato starch proved to be a promising alternative as a fat replacer in the ice cream production.     

Steaming time effects on the moisture migration and structural properties of Chinese Northern-style steamed bread

The aim of this study was to investigate the steaming time effects on proton transverse relaxation behavior with low field 1H nuclear magnetic resonance and structural properties of Chinese Northern-style steamed bread (CNSB). Three proton populations could be distinguished at the first 4 min: T_2b (0.1–1 ms) corresponded to rigid and exchangeable protons; T₂₂ (9–21 ms) was associated with the water protons in small and large meshes of the dough microstructure; T₂₃ (69–300 ms) was assigned to the water protons on the surface of samples. The starch gelatinization began and the water turned into the integral part of the biopolymer at 6 min, forming T₂₁ (1–3 ms) fraction. The gelatinization effect was strengthened up to 8 min and supplied a more mobile microenvironment, resulting in the increase of T₂₁, A₂₁ and M₂₁. However, the gelatinization process ended at 8 min, bringing about the stabilization of T₂₁, A₂₁ and M₂₁ until 25 min. T₂₂ fraction accounted for the largest proportion during all the steaming process. All variation trends on structural properties of CNSB and T₂ relaxation parameters including T_i, A_i (relative intensity of T_i), and M_i (population abundance of T_i) indicated that 6 and 8 min were the two transitions. The gluten matrix began to be disrupted at 6 min and was quite damaged up to 8 min by scanning electron microscopy. The peaks at 15°, 18°, 20°, and 23° in X-ray diffraction patterns appeared in the first 6 min but were lost up to 8, 10, and 25 min.     

The Effect of Thyme Oil Low-Density Polyethylene Impregnated Pellets in Polylactic Acid Sachets on Storage Quality of Ready-to-Eat Avocado

After earlier promising results for the control of anthracnose in avocado fruit by thyme vapours, our studies were extended to commercial use in tray packs. The effect of thyme oil low-density polyethylene impregnated pellets (TO-LDPE-P) in polylactic acid (PLA) sachets was investigated for the control of anthracnose and retention of dietary phytochemicals, fatty acid composition, D-mannoheptulose sugar and fruit quality in ready-to-eat avocado fruit. The 10% TO-LDPE-P significantly reduced the incidence severity of anthracnose and enabled the retention of dietary phytochemicals (p-coumaric, ferulic and caffeic acid, catechin and epicatechin), fatty acids, mannoheptulose, fruit firmness and taste compared to the currently used prochloraz^® fungicide treatment. The results of this study strongly suggest the incorporation of 10% TO-LDPE-P in PLA sachets in commercial avocado tray packs as a natural option to improve fruit health, dietary phytochemicals, fatty acid composition and consumer satisfaction.     

Preservative Effect of a Previous High-Pressure Treatment on the Chemical Changes Related to Quality Loss in Frozen Hake (<Emphasis Type="Italic">Merluccius merluccius</Emphasis>)

The objective of this study was the quality loss inhibition of hake (Merluccius merluccius) during the frozen storage. For it, the effect of a previous high-pressure (HP) treatment (150–450 MPa for 2 min) was analysed throughout a 5-month storage at ? 10 °C. Quality changes were monitored by complementary chemical analyses. Inhibition (p < 0.05) of dimethylamine (DMA), free fatty acid (FFA), formaldehyde (FA), trimethylamine, total volatile amine and fluorescent compound (tertiary lipid oxidation compound) formation was concluded by previous pressure treatment according to the one-way ANOVA analysis. On the contrary, no effect (p > 0.05) on the K value, polyene index and formation of peroxides and thiobarbituric acid reactive substances was achieved. Additionally, a multifactor ANOVA test (pressure and frozen storage time effects; i.e. comparison among HP treatments) showed an inhibitory effect (p < 0.015) on DMA and FFA formation, this effect increasing with pressure level applied. This inhibitory effect on the formation of such molecules related to quality loss can be explained on the basis of the damage caused to different kinds of enzymes such as trimethylamine oxide demethylase, lipases and phospholipases, so that their activity during the subsequent frozen storage would decrease. The work here presented provides for the first time information concerning the employment of HP technology to inhibit the DMA, FA and FFA formation during the frozen storage of hake. Further research focussed on commercial frozen conditions (? 18 °C) and including sensory and nutritional aspects is foreseen.     

Antimicrobial Activity of Binary and Ternary Mixtures of Vanillin,Citral, and Potassium Sorbate in Laboratory Media and Fruit Purées

The susceptibility of Escherichia coli, Salmonella enteritidis, Saccharomyces cerevisiae, and Zygosaccharomyces bailii to binary and ternary mixtures of potassium sorbate (KS), vanillin (V), and citral (C) was evaluated according to the Berenbaum experimental design, in laboratory media. For some V/C combinations, KS inhibitory concentrations were determined in agarized melon and mango purées by the spiral gradient endpoint (SGE) method. In laboratory media, inhibitory antimicrobial combinations were generally additives. For the yeasts, some synergistic effects were observed. All Berenbaum mixtures which resulted inhibitory in laboratory media were confirmed in the fruit purées. When the SGE method was used, several inhibitory ternary mixtures were found. The lowest inhibitory KS concentrations, estimated for a given V/C combination, corresponded to the bacteria assayed in melon purée. Z. bailii was not inhibited at any condition. Some synergistic antimicrobial combinations (595 ppm V + 251 ppm C + 8 ppm KS in melon and 280 ppm V + 123 ppm C + 8 ppm KS in mango purées) could be useful to achieve a desired inhibitory effect in fruit purées while reducing their concentrations.     

Physical and Antioxidant Characterization of Edible Films Added with Red Prickly Pear (<Emphasis Type="Italic">Opuntia ficus-indica</Emphasis> L.) cv. San Martín Peel and/or Its Aqueous Extracts

The aim of this research was to investigate the effect of the addition of peel powder and/or its aqueous extract on physical and antioxidant characteristics of carboxymethyl cellulose (CMC) edible films. Prickly pear peel powder and aqueous extract (2 and 4%) were characterized in color, bioactive compounds (betalains and total phenolic compounds), antioxidant capacity and reducing power. Edible films were prepared with CMC, glycerol, varying the dissolution medium (0, 2, or 4% aqueous extract from prickly pear peel) and peel powder (0, 1, or 2%) using a face-centered central composite design. Physical, mechanical, bioactive compounds, and antioxidant capacity properties were investigated in edible films. Prickly pear peel powder presented 58.8 ± 0.08 mg of betacyanins/100 g, 53.8 ± 0.2 mg of betaxanthins/100 g, 967.8 ± 20 mg Gallic acid equivalent (GAE)/100 g for total phenolic compounds, an antioxidant capacity equivalent to 420.9 ± 4.9 mg GAE/100 g and a reducing power of 879.1 ± 115.9 mg ascorbic acid equivalent (AAE)/100 g. High concentration of aqueous extract and peel powder in CMC films increased the bioactive compounds content, antioxidant capacity and reducing power. Films mechanical properties were not affected by the aqueous extract; nevertheless, were strongly affected by the peel powder. Response surface methodology was used to optimize edible films formulation with high antioxidant characteristics, being the optimal formulation 1.7% of peel powder plus 3.3% of aqueous extract. This study may be the base for exploitation of prickly pear peel as source of bioactive compounds with antioxidant capacity for their use in edible coatings.