沙漠沙海

沙漠沙海是现代和古代全球环境的一个重要组成部分。其同期形成的岩层含有重要的油气矿床,同时还是极好的含水层。沙漠的变迁导致了古代文明的衰落与淹没以及成为当今沙漠边缘大草原区(Sahel)的灾难。然而,对沙漠所进行系统的研究仍是寥寥无几,中新世至今的沙漠史仍是一片空白。本文阐述了对炎热低地沙漠尤其是南非的最新研究,侧重于重建古环境和古气候。     

网络虚拟服务器安全性对策研究方案

针对目前虚拟服务器的安全问题进行研究。设计了一种新的Web虚拟服务器应用安全的解决方案,在代码一级对其攻击进行检测和防护。即一方面,确定代码位置,利用特定的API调用在其前后对用户输入相关的参数进行判断是否含有可能的攻击存在并进行相应的处理;另一方面在应用源代码或中间代码文件中插入本方案的检测代码,以实现防护的功能。     

An acoustic micrometer and its application to layer thickness measurements

The principle and system of the acoustic micrometer are described. Its basic performance, with respect to the stability, accuracy, spatial resolution, and temperature dependence, is also discussed. Gold layers electroplated on substrates of 42% Ni-Fe alloy were taken as test specimens in the present study. The measurable range of the thickness for gold layers covered from 1 to 20 mum when a frequency range of 10-200 MHz was used. Stability and accuracy were achieved to within +/-0.2% and +/-1%, respectively.     

Excitation of plate waves in thickness measurements of layers deposited on thin plates

Layer thickness measurements with an acoustic micrometer using pseudo-Sezawa waves in which ultrasonic waves are obliquely applied to a layered surface of a specimen have been proposed. A case in which the plate thickness of the specimen is so thin that it cannot be regarded as a half space is studied. A number of modes of plate waves are then excited in addition to pseudo-Sezawa waves. The plate waves, giving rise to the appearance of extra dips in the power spectrum of reflected waves, cause difficulties in the measurements. To prevent the excitation of plate waves, it is proposed that a mask of a sound-insulating material with a slit aperture should be placed on the layered surface of the specimen. Experiments and theoretical calculations, using lead frames of LSI chips as typical test specimens with thin substrates, were performed to demonstrate the effectiveness of the present method in preventing the excitation of plate waves.     

Vector-extrapolated fast maximum likelihood estimation algorithms for emission tomography

A new class of fast maximum-likelihood estimation (MLE) algorithms for emission computed tomography (ECT) is developed. In these cyclic iterative algorithms, vector extrapolation techniques are integrated with the iterations in gradient-based MLE algorithms, with the objective of accelerating the convergence of the base iterations. This results in a substantial reduction in the effective number of base iterations required for obtaining an emission density estimate of specified quality. The mathematical theory behind the minimal polynomial and reduced rank vector extrapolation techniques, in the context of emission tomography, is presented. These extrapolation techniques are implemented in a positron emission tomography system. The new algorithms are evaluated using computer experiments, with measurements taken from simulated phantoms. It is shown that, with minimal additional computations, the proposed approach results in substantial improvement in reconstruction.     

Microdefocusing method for measuring acoustic properties using acoustic microscope

Many papers have been reporting on measuring acoustic properties of materials by acoustic microscopy. In a conventional method of V (z) curve analysis, the phase velocity and the propagation attenuation of a leaky surface acoustic wave (LSAW) are determined from the interference period Deltaz and the slope of the V(z) curve, respectively. For this method it is necessary to measure the V(z) curve for a period several times as long as the interference period Deltaz. Therefore, it is difficult to measure the acoustic properties of a sample with high resolution by the method. In order to overcome these problems, a method called the microdefocusing method is proposed. The method determines the acoustic properties of a sample by analyzing V (z) values measured in the microdefocusing region within an interference period Deltaz near a focal plane. An ultrasonic transducer called the butterfly transducer is proposed to be applied to this microdefocusing method and a digital signal processing procedure is developed to analyze the output of the ultrasonic transducer. Basic experiments are performed to confirm the principles of the new method.     

When is light work heavy? Components of the physical workload of sewing machine operators working at piecework rates

Epidemiologists have associated the job of sewing machine operators with a high incidence of musculoskeletal and other health problems, despite its classifications as light work according to energy expenditure criteria. An ergonomic analysis was undertaken in a trouser factory in order to describe components of the physical load of this work: force exerted, repetitions, time allocation and postures. Work activity of ten operators was observed and timed in situ, and forces were measured with a dynamometer. The time required to sew one seam is very short, 10-15 s per trouser leg. This short cycle is repeated more than 1500 times during the work day, involving quasi-continuous movements of the same parts of the body. The fact that movements are repeated so many times means that small details of the task assume a great importance. During the work day, a substantial force is exerted, only part of which can be measured with current technology. By these measurements, operators lift an average 406.1 kg of trousers per day and exert an average total force of 2858.4 kg with the upper limbs and 24 267.9 kg with the lower limbs. The work posture is static: seated with upper back curved and head bent over the sewing machine. Movements of the upper limbs involve abduction and adduction of the shoulders while exerting a force. For the same task, there is considerable variation in the dimensions of workstations. Interviews were conducted to determine the types of musculoskeletal complaints. The components of work activity could be treated to these complaints and to existing epidemiological data on musculoskeletal problems among sewing machine operators. This type of detailed examination can be applied by health and safety personnel to identify task components which could be changed to minimize the probability of musculoskeletal problems.     

Experimental evaluation of a hollow glass fiber

Very high interest in making a low-loss fiber for the infrared has been stimulated by important applications in optical communication, surgery, cutting, welding, and heat treatment. The leaky waveguide is one of the most promising types of future fiber in the infrared region where low-loss materials are not available or not suitable for making fibers (i.e., CO2 laser light lambda = 10.6 microm). In this paper a comparative model of a He-Ne laser beam and an oxide glass leaky hollow fiber for a CO2 laser light beam and a chalcogenide glass leaky hollow fiber are studied. Measurements of attenuation, dependence of output power on diameter and angle, and the angular dependence of output angle vs input angle were made. The experimental data were compared with theoretical calculations, and the critical value of the wall thickness for minimum attenuation is given.