Comparative study of dark patinas on granitic outcrops and buildings

Formation of dark patinas on rocky surfaces is mainly related to the deposition of gases and particles and to sulphation mechanisms. In the present study, samples of dark patinas taken from granitic outcrops and from granitic buildings were examined in an attempt to understand the mechanisms of their formation. The outcrops are located in non-polluted areas and are characterized by the absence of any extraneous material that provides calcium, such as e.g. mortar. The buildings are located in areas with low levels of pollution. The climate in the study area favours proliferation of microorganisms. Important differences between the patinas sampled from outcrops and from buildings were observed, as the former are of biological origin and the latter of anthropogenic origin. Although the levels of pollution are low in the sampling area, sulphur was present in all of the samples from urban buildings. Sulphur was not present in patinas from outcrops or in patinas from monuments that are assumed to behave as outcrops (dolmens), although the latter are also of anthropogenic origin. Finally, the patinas were found to be formed by elements accumulated on the surface and not from elements contained within the rock itself.     

The impact of preoxidation of SAS on biosorption efficiency on activated carbon

We have studied the process of a prolonged dynamic filtration on activated carbon in two biosorption systems — without preoxidation treatment of the initial matter and after ozonization. It has been shown that given the uniform load on activated carbon terms of the organic matter the efficiency of the biosorption process after preozonization is 2.3 times as small compared with that that without pretreatment, which correlates with the change of adsorption free energy.     

Impact of the River Maine Drainage Scheme on Hydro-Power Generation

A comparison is made between pre- and post-drainage scheme river flows recorded on the River Maine, Co. Antrim. A method of using five-year reference periods has been applied to the mean daily flows to smooth and eliminate, as far as possible, variations due to climatic changes.
Any loss of energy production which might have been due to changes in river flow was examined for turbine installations at a factory at Cullybackey. The quantities of usable water, and hence potential energy production, were calculated for each of the post-scheme five-year periods and compared with a pre-scheme five-year reference period. Any potential loss was then represented by a depreciation factor. It was found that no measurable loss of potential energy production has occurred on the River Maine in the post-scheme period.     

The Effect of Energy-Supply and Performance Indicators on the Performance of Traction-Resource Management Centers

Russian Electrical Engineering - This paper presents the results of a study of the effect of the characteristics of the traction power-supply system on the indicator of the energy supply of...     

Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

A Gas-Recirculation Control System in a Battery of Fuel Cells

Currently, power plants based on hydrogen—oxygen fuel cells are widely used. The advantages of such electrochemical generators are environmental friendliness, efficiency, and a wide power-output range. Some components of such engines are still being developed. One of these components is the working gasrecirculation system, which increases the efficiency of an installation. In addition, this system helps support the water balance in a fuel-cell stack by removing the water that occurs in the cavities of the membrane—electrode block as a result of the electrochemical reaction. With consideration of the complexity of the reactions that occur in an installation, an automatic control system (ACS) is necessary for the gas recirculation system. This article deals with the organization of an automatic control system based on a microprocessor controller, sensors, and actuators, which implements control algorithms for the components of the gas recirculation system.     

High Temperature Oxidation Behavior of Conventional and Nb-Modified MAR-M246 Ni-Based Superalloy

The present investigations focused on the thermal oxidation of two variants of MAR-M246 alloy having the same contents of Ta and Nb in at. pct, considering the effects of total replacement of Ta by Nb. The alloys were produced by investment casting using high purity elements in induction furnace under vacuum atmosphere. The alloys were oxidized pseudo-isothermally at 800 °C, 900 °C and 1000 °C up to 1000 hours under lab air. Protective oxidation products growing on the surface of the oxidized samples were mainly Al₂O₃, Cr₂O₃. Other less protective oxide such as spinels (NiCr₂O₄ and CoCr₂O₄) and TiO₂ were also detected as oxidation products. The conventional alloy exhibited slight internal oxidation at 800 °C and an enhanced resistance at 900 °C and 1000 °C. The Nb-modified alloy presented an exacerbated internal oxidation and nitridation at 900 °C and 1000 °C and an enhanced resistance at 800 °C. At 1000 °C, Nb-modified alloy was particularly affected by excessive spalling as the main damage mechanisms. From a kinetic point of view, both alloys exhibit the same behavior at 800 °C and 900 °C, with k_p values typical of alumina forming alloys (2 × 10⁻¹⁴ to 3.6 × 10⁻¹³ g² cm⁻⁴ s⁻¹). However, Ta modified alloys exhibited superior oxidation resistance at 1000 °C when compared to the Nb modified alloy due to better adherence of the protective oxide scale.

     

Plastic Deformation Resistance of Steel Grades EP450-Sh and EP823-Sh in Hot and Cold State

Metallurgist - The article presents the results of plastometric studies on hot deformation and studies on the hardening curves in cold deformation of EP450-Sh (12H12M1BFR-Sh) and EP823-Sh...