Measurement of the relative reduction of strip on the 1200-model temper-rolling mills in flat-rolled products shop No. 3

The temper-rolling mills in flat-rolled products shop No. 3 at the MMK has been equipped with the Vytyazhka automated system to measure the elongation of strip (ASEMS) rolled on the mill. The elongation (relative elongation) of the strip is determined through a frequency-based method of measuring the speed of the strip before and after reduction. The system transmits and displays information on the temper-rolling of each coil. The information is shown as a diagram on the monitor of an industrial computer. The reliability of the system allows it to be in continuous use. Introduction of the automated elongation measurement system makes it possible to monitor the reductions being made during temperrolling, which in turn enables the shop to reduce the number of products having properties that do not meet customers’ requirements. __________ Translated from Metallurg, No. 1, pp. 62–63, January, 2007.     

New technological solutions to protect the lining of blast-furnace hearths

The use of schungite as a partial replacement for coke is practiced in Russia at a number of metallurgical plants, both in the production of foundry iron (its primary use) and in making conversion pig iron. The largest amount of coke is replaced when foundry iron is being made, the replacement coefficient in this case having a value within the range 0.8–1.3. Studies that included continuous monitoring of the temperature of the carbon blocks in blast furnaces with volumes of 1719, 3200, and 5580 m³ unambiguously demonstrate that the thickness of the slag crust in blast furnaces increases with the use of schungite. Protecting the lining of the hearth through the use of schungite is also accompanied by a decrease in coke consumption. __________ Translated from Metallurg, No. 8, pp. 53–57, August, 2007.     

Corrosion resistance of a bent plate from a high-nitrogen nonmagnetic 05Kh22AG15N8M2F steel in aggressive media

The corrosion resistance of the convex and concave sides of bent plates from a high-nitrogen non-magnetic steel has been studied in aqueous solutions of sulfuric and hydrochloric acids. Weighing and hydrogen methods are used to control the corrosion rate of bent-sample sides and to find a number of effects that complement the picture of the stress corrosion of iron alloys and support the existence of the mechanochemical deformation sign effect.     

Organ distribution of bovine serum albumin administered intragastrically in the rat

Radioimmunoassay was employed to examine distribution of antigenic structures of bovine serum albumin (BSA), absorbed by the gastrointestinal tract, in the blood serum and organs of intact rats. It was shown that 3 h after administering 3H-BSA an appreciable amount of its antigenic structures could be identified in the blood serum, liver, spleen, and carcass of the animals. The total amount of antigenic determinants of BSA which got into the internal environment of the body from the intestine amounted to about 0.2% of the dose administered. The highest specific content of antigenic structures of BSA supplied via the intestinal barrier was detected in the spleen.     

Oxidative stability of the lipids in whitefish

The manometric technique was employed to study the initiated oxidation of 7 samples of whitefish lipids of varying sites, to measure the kinetic parameters depending on the fatty acid composition and concentration of tocopherol. Changes in oxidative stability of lipids of varying localization was shown, a higher stability of muscle tissue lipids was noted as compared with brain and depot lipids. The possibility of testing oxidative stability of lipids according to the kinetic parameters is discussed.     

An assessment of the θ-projection method for the representation and extrapolation of creep data for a 1%Cr, 12%Mo, 14%V steel tested at 565°C

Constant stress creep data for a wrought 1%Cr, $\text{1}\text{2}\text{\%}\text{Mo}$, $\text{1}\text{4}\text{\%}\text{V}$ steel obtained from six tests carried out at 565°C have been fitted and extrapolated using the θ-projection method. Creep curves for high stresses were fitted well, but curves extrapolated to stress levels below those used in the θ-projection did not represent well the available data for primary-secondary creep. To enable a satisfactory extrapolation of results, it was found necessary to redefine the failure condition to be less sensitive to the shape of the latter sections of the tertiary creep curve. This was achieved by defining lifetime as the point on the curve at which the strain rate reached a fixed multiple of the creep rate at half the rupture time. The extrapolated data compare well with the results of tests carried out independently on a cast 1%Cr, $\text{1}\text{2}\text{\%}\text{Mo}$, $\text{1}\text{4}\text{\%}\text{V}$ steel. The extrapolation procedure not only predicts the ‘knee’ in the log stress-log lifetime curve but allows extrapolation of lifetimes by over a factor of thirty. In addition, acceptable predictions have been made of constant load experimental data.     

Preliminary model of the Ribeira Grande geothermal field (Azores Islands)

On the basis of a geological - volcanological - geophysical survey, integrated with petrological and geochronological data, a structural model, including a shallow magmatic body, was defined for the Ribeira Grande area, Sao Miguel island (Azores). Two series of production tests were carried out in the Pico Vermelho 1 and Ribeira Grande 1 wells, which led to a preliminary definition of the deep fluid circulation. The data obtained from these studies were used to reconstruct a preliminary model of the Ribeira Grande geothermal field.