Microscopic fatigue processes in a plain-weave glass-fibre composite

This paper focuses on the microscopic damage and progressive failure of a composite reinforced by plain-weave glass cloth under tensile fatigue loading. The fatigue process was divided into three stages like that of multi-directional laminates. It was found that the internal damage at each stage (matrix cracks, debonds in the weft, successive debonds in the warp and ‘metadelaminations’ between warps and wefts) occurred near the cross-over point of the fabric. The modulus decay mechanism was explained by considering the progression of this internal damage. From the end of the first stage to the beginning of the middle stage, a characteristic damage state (CDS) (called a ‘meta-CDS’) was observed. It was found that woven composites have a unit area of damage accumulation (called a ‘unit cell’) and the damage of each unit cell and its distribution control the total fatigue damage of the material.     

Fast convergent study on potential－harmonic method of directly solving Schrodinger equation in few－body systems

Ｆａｓｔｃｏｎｖｅｒｇｅｎｔｓｔｕｄｙｏｎｐｏｔｅｎｔｉａｌ－ｈａｒｍｏｎｉｃｍｅｔｈｏｄｏｆｄｉｒｅｃｔｌｙｓｏｌｖｉｎｇＳｃｈｒｏｄｉｎｇｅｒｅｑｕａｔｉｏｎｉｎｆｅｗ－ｂｏｄｙｓｙｓｔｅｍｓＷａｎｇＹｉ－Ｘｕａｎ（王沂轩）ａｎｄＤｅｎｓＣｏｎｇ...     

Multimedia Signal Processors: An Architectural Platform with Algorithmic Compilation

Novel algorithmic features of multimedia applications and advances in VLSI technologies are driving forces behind the new multimedia signal processors. We propose an architecture platform which could provide high performance and flexibility, and would require less external I/O and memory access. It is comprised of array processors to be used as the hardware accelerator and RISC cores to be used as the basis of the programmable processor. It is a hierarchical and scalable architecture style which facilitates the hardware-software codesign of multimedia signal processing circuits and systems. While some control-intensive functions can be implemented using programmable CPUs, other computation-intensive functions can rely on hardware accelerators.To compile multimedia algorithms, we also present an operation placement and scheduling scheme suitable for the proposed architectural platform. Our scheme addresses data reusability and exploits local communication in order to avoid the memory/communication bandwidth bottleneck, which leads to faster program execution. Our method shows a promising performance: a linear speed-up of 16 times can be achieved for the block-matching motion estimation algorithm and the true motion tracking algorithm, which have formed many multimedia applications (e.g., MPEG-2 and MPEG-4).     

Application of outranking methods to economic and financial justificaton of CIM systems

Traditional economic evaluation methods concentrate on maximizing or minimizing a single objective such as net present value and pay back period. In the last decade, there has been an increased awareness of the need to consider multiple attributes in the evaluation of advanced manufacturing systems. Various methods have recently been developed for the evaluation of CIM systems. This paper discusses multiattribute methods for justification of CIM systems and outranking methods including ELECTRE, ORESTE, and PROMETHEE.     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.     

Sensors for the food industry

This article presents an overview of the results of a five-year research project on sensors for the food industry in Japan. This project was a government-sponsered research programme involving the food industry and the instrumentation industry, coordinated by the Japanese Ministry of Agriculture, Forestry and Fisheries. The programme focussed on 17 food processing operations and quality control tasks, where the need for an on-line (or rapid at-line) measurement had been established. The instrument development work employed biosensors pH and gas sensors, optical-imaging devices, as well as near-infrared, microwave, ultrasound and mechanical resonance techniques, together with robotics and advanced data-processing techniques.     

Evidence of late palaeozoic thermalwater metallization in South Yongmei Depression

This paper discusses the seafloor thermalwater spout sedimentary activity in South Yongmei Depression according to the following evidences: the Yongmei region was in an extended tectonic environment of metaplateform and locally developed intracontinental rift aulacogen in company with the activity of rich alkali, high potassium volcanics of double-peak type. Several kinds of hydrothermal sedimentary rocks and the ore-bearing sedimentary formations of copper-polymetals, iron and manganese exist in this region with a zoning feature of the seafloor thermalwater spout sedimentation. Project supported by the Science Foundation of NECC for Returns Synopsis of the first author Wu Chengjian, associated professor, born in 1957, majoring in ore deposit and mineralgraphy.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

Specific heat of a marginal Fermi liquid

The temperature dependence of a marginal Fermi liquid has been calculated. We showed that the expectedT lnT correction is characteristic for the low-temperature domain. The high-temperature domain has a supplementary correction. The results are in agreement with the non-Fermi behavior of some metallic systems the in low-temperature domain.