A study on the plasma polymer thin film surface modification for DNA alignment by using high energy electron beam irradiation

The plasma polymer thin films were deposited on Si(100) substrate by PECVD (plasma enhanced chemical vapor deposition) method. Liquid cyclohexene was used as single organic precursor. It was heated up to 60 °C and bubbled up by hydrogen gas, which flow rate was 50 sccm (standard cubic centimeters per min). Deposition temperature was room temperature. Plasma was ignited by a radio frequency (RF; 13.56 MHz) of 10 W.As-deposited plasma polymer thin films were treated by e-beam of 300 keV with various adsorption radiation doses. The plasma polymer films, which were treated by high energy e-beam (HEEB), were investigated by FT-IR (Fourier Transform Infrared), XPS (X-ray Photoelectron Spectroscopy), AFM (Atomic Force Microscopy), and the water contact angles.From IR spectra, the intensity of OH functional group is increased by increasing electron dose rate. XPS results also show that the intensity of O_1s peak is increased by increasing electron dose rate. C_1s peak shows that oxygen bonded at carbon site. The water contact angles are decreased by increasing electron dose rate. From the AFM analysis, we observed the formation of λ-DNA (deoxyribonucleic acid) array on plasma polymer film, which was treated by HEEB with 14 kGy of adsorption radiation dose.     

SnO2–Au nanocomposite synthesized by successive ionic layer deposition method: Characterization and application in gas sensors

A possibility of synthesizing the SnO₂–Au nanocomposite by the successive ionic layer deposition (SILD) method is demonstrated in this article. It is shown that as a result of successive treatments in solutions of Sn(OH)_xF_yCl_z and HAuCl₄ the SnO₂–Au nanocomposite with a Sn/Au ratio varying from 1:1 to 6:1 can be formed on the surface of substrates. It is found that the value of this ratio depends on the concentration of F ions in solution. The gold in the indicated composite is in the metallic state. The growth of the SnO₂–Au composite takes place through the formation of 3-D precipitates, which form a continuous film after 13 deposition cycles. As a result, a layer with averaged thickness of up to 20 nm is formed on the surface. Nanocomposite films, even after treatment at an annealing temperature T_an ∼ 600 °C, have finely dispersed structure. The size of the Au clusters incorporated in the SnO₂ matrix is in the range from 3 to 15 nm. Gas sensing characteristics of SnO₂ films modified by SnO₂–Au nanocomposites are discussed as well. It is shown that surface modification by SnO₂–Au nanocomposites can be used for improving operating characteristics of conductometric SnO₂-based gas sensors.     

The development of a robust design methodology for time‐oriented dynamic quality characteristics with a target profile

Innovative engineering techniques are often sought within the manufacturing environment to improve product quality and promote more cost‐effective strategies. Robust design methods are frequently used to serve this purpose, with the objective of minimizing the variability inherent within a particular process or system. A review of the literature suggests that most robust design research involves the study of static quality characteristics, given a pre‐defined specification interval or region and target value. In addition to proposing a methodology for working with dynamic quality characteristics where the specifications and target value may change over time, this paper offers two other distinct contributions. First, those researchers who have examined dynamic systems traditionally consider the effects of a signal factor on a response variable on the identification of optimal factor settings. In contrast, this paper will consider the effects of a quality characteristic changing over time, thus removing the need to confine the problem to signal–response systems. Furthermore, most researchers consider the optimization of the process mean according to the costs of non‐conforming to an established specification interval or region. This paper, however, utilizes a methodology involving the simultaneous optimization of the process mean and variance while expanding the problem to consider a loss in quality attributed to deviation from a target value over time. Copyright © 2010 John Wiley & Sons, Ltd.     

Direct and seamless coupling of TiO2 nanotube photonic crystal to dye-sensitized solar cell: a single-step approach

A TiO(2) nanotube layer with a periodic structure is used as a photonic crystal to greatly enhance light harvesting in TiO(2) nanotube-based dye-sensitized solar cells. Such a tube-on-tube structure fabricated by a single-step approach facilitates good physical contact, easy electrolyte infiltration, and efficient charge transport. An increase of over 50% in power conversion efficiency is obtained in comparison to reference cells without a photonic crystal layer (under similar total thickness and dye loading).     

Biochemical monitoring of black raspberry (Rubus coreanus Miquel) fruits according to maturation stage by H NMR using multiple solvent systems

Nuclear magnetic resonance (NMR) techniques coupled with multivariate data analysis were used to conduct monitoring of biochemical changes of black raspberry fruits at different stages of maturation and under various extraction and NMR dissolution solvent conditions: extraction with 50% methanol and D₂O as an NMR dissolution solvent, extraction with 50% methanol and 50% methanol-d₄ as an NMR dissolution solvent, and extraction with 100% ethyl acetate and 100% methanol-d₄ as an NMR dissolution solvent. Partial least-squares discriminant analysis reliably distinguished black raspberry fruits according to the maturation stage, whereby the relative levels of various compounds such as amino acids, organic acids, sugars and phenolic compounds were compared using analysis of variance. Sucrose and most of the amino acids, and organic acids decreased, whereas fructose, glucose, and cyanidins increased in relative concentration according to maturation of black raspberry fruits. The total number and kinds of assigned compounds of the three solvent systems were also compared. This research demonstrates that the metabolic profile of black raspberry fruits changes during maturation, and provides objective criteria for determining the stage of black raspberry fruit maturation via a ¹H NMR-based metabolomics technique using multiple solvent systems.     

Flexible photodiodes constructed with CdTe nanoparticle thin films and single ZnO nanowires on plastics

We construct a flexible pn heterostructured photodiode using a CdTe nanoparticle thin film and a single ZnO nanowire (NW) on a plastic substrate. The photocurrent characteristics of the flexible photodiode are examined under illumination with 325 nm wavelength light and the photocurrent efficiencies at bias voltages of ± 2.5 V are estimated to be 8.0 and 2.1 μA W(-1) under forward and reverse bias conditions, respectively. The photocurrent generation of the pn heterostructured photodiode is dominantly associated with the transport of the photogenerated charge carriers in the single ZnO NW. Furthermore, the operations of our flexible photodiode are investigated in the upwardly and downwardly bent states, as well as in the flat state.     

Fabrication of sticky and slippery superhydrophobic surfaces via spin-coating silica nanoparticles onto flat/patterned substrates

Silica nanoparticles were spin-coated onto a flat/patterned (regular pillar-like) substrate to enhance the surface roughness. The surface was further modified by a self-assembled fluorosilanated monolayer. The advancing/receding contact angle and sliding angle measurements were performed to determine the wetting behavior of a water droplet on the surface. It is interesting to find that a transition from a Wenzel surface to a sticky superhydrophobic surface is observed due to the spin-coating silica nanoparticles. A slippery superhydrophobic surface can be further obtained after secondary spin-coating with silica nanoparticles to generate a multi-scale roughness structure. The prepared superhydrophobic substrates should be robust for practical applications. The adhesion between the substrate and nanoparticles is also examined and discussed.     

Catalytic characteristics of MnO2 nanostructures for the O2 reduction process

Nanorods with an α type MnO(2) structure and a diameter ranging from 25 to 40 nm, along with tipped needles with a β MnO(2) structure and a diameter of 100 nm were obtained. The 25 nm diameter α MnO(2) nanorods showed the best catalytic activity for dissociation of HO(2)(-) formed during oxygen reduction in a KOH solution. The MnO(2) nanostructures preferably followed a two-electron oxygen reduction mechanism in a LiOH solution. The size of the catalyst also affected the specific capacities of the non-aqueous Li/O(2) batteries fabricated using the MnO(2) based air electrode. The highest specific capacity of 1917 mA h g(-1) was obtained for an α MnO(2) nanorod catalyst having a diameter of 25 nm. The cation present in the MnO(2) nanostructures appears to determine the catalytic activity of MnO(2).