Megasonic agitation for enhanced electrodeposition of copper

In this paper we propose an agitation method based on megasonic acoustic streaming to overcome the limitations in plating rate and uniformity of the metal deposits during the electroplating process. Megasonic agitation at a frequency of 1 MHz allows the reduction of the thickness of the Nernst diffusion layer to less than 600 nm. Two applications that demonstrate the benefits of megasonic acoustic streaming are presented: the formation of uniform ultra-fine pitch flip-chip bumps and the metallisation of high aspect ratio microvias. For the latter application, a multi-physics based numerical simulation is implemented to describe the hydrodynamics introduced by the acoustic waves as they travel inside the deep microvias.     

Modeling and solving a one-supplier multi-vehicle production-inventory-distribution problem with clustered retailers

This paper considers a supply chain management problem which integrates production, inventory, and distribution decisions. The supply chain is composed of one supplier production facility and several retailers located in a given geographic region. The supplier is responsible for the production and the replenishment of the inventory of retailers, in a vendor managed inventory (VMI) context. The distance between retailers is negligible compared to the distance between the supplier and the retailers’ region. Thus, for each vehicle, there is a major fixed cost for traveling to the cluster of retailers and a minor fixed cost for visiting each individual retailer. The problem consists of determining quantities to be produced, quantities to be delivered to retailers, vehicles to be used, and retailers to be serviced by each vehicle. This problem is an extension of the one warehouse multi-retailer problem with the consideration of production planning and storage and vehicle capacity limitations in addition to fixed vehicle utilization costs and retailer servicing costs. The objective is to minimize a total cost composed of production, transportation, and inventory holding costs at the supplier and at the retailers. Two mixed integer linear programming formulations are proposed and six families of valid inequalities are added to strengthen these formulations. Two of these families are new and the others are adapted from the literature. The numerical results show that the valid inequalities considerably improve the quality of the formulations. Moreover, the parameters that influence the most computational times are analyzed.     

Thermally stable antimicrobial polyvinylchloride/maleimido aromatic hydrazide composites

Antimicrobial novel substituted maleimido aromatic hydrazides were synthesized from N‐[4‐(chlorocarbonyl) phenyl] maleimide with salicylhydrazide, p‐aminobenzohydrazide, or p‐aminosalicylhydrazide. They were characterized by Fourier transform infrared (FTIR), hydrogen‐1 nuclear magnetic resonance (¹H‐NMR), mass spectra, elemental analyses, and antimicrobial activities. These derivatives were investigated as thermal stabilizers for rigid poly(vinyl chloride) (PVC) at 180°C in air by measuring the rate of dehydrochlorination, the extent of discoloration, and the changes that occurred in the molecular masses of the degraded PVC samples. The previously reported stabilizing efficiency data of a nonsubstituted derivative, which was synthesized from N‐[4‐(chlorocarbonyl) phenyl] maleimide with benzohydrazide, is also given for comparison. The results reveal the greater stabilizing efficiency of the investigated derivatives as shown by their longer thermal stability (Ts) periods and lower dehydrochlorination rates in relation to dibasic lead carbonate, cadmium‐barium‐zinc stearate, and n‐octyltin mercaptide industrial stabilizers. The stabilizing efficiency increases with the introduction of electron donating substituent groups in the aromatic ring of the stabilizer molecules. Moreover, the investigated stabilizers impart better color stability for the degraded samples as compared with the reference stabilizers. A synergistic effect is achieved when the materials under investigation were mixed in various weight ratios with any of the reference stabilizers, reaching its maximum at equivalent weight ratio of the investigated stabilizer to the reference one. J. VINYL ADDIT. TECHNOL., 22:247–258, 2016. © 2014 Society of Plastics Engineers     

In vitro evaluation of spray‐dried chitosan microspheres crosslinked with pyromellitic dianhydride for oral colon‐specific delivery of protein drugs

Chitosan microspheres have been prepared using a spray‐drying method, and crosslinked with pyromellitic dianhydride. The chemical structure of the modified chitosan was characterized by FTIR spectroscopy and solid state 13C NMR analysis. The particle size and morphology of the crosslinked chitosan were investigated. These microspheres were evaluated for colon‐specific delivery of bovine serum albumin (BSA) as a model protein drug. The results indicate that the drug was released as follows: 37.1 ± 2.8% after 2 h in SGF, 73.1 ± 4.8% after 8 h (2 h in SGF+ 6 h in SIF), and 80.9 ± 4.1% after 12 h in SCF. The effect of β‐glucosidase on the drug release was also examined. The encapsulation efficiency was decreased from 88.4 ± 3.1% to 62.8 ± 2.9%, with increasing BSA concentration. Loading capacity was significantly increased from 6.3 ± 0.3% to 41.8 ± 4.1% by increasing the initial BSA concentration. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40514.     

Thermally stable antimicrobial PVC/maleimido phenyl urea composites

Four novel antimicro bial maleimido phenyl urea derivatives were synthesized from N-[4-(chlorocarbonyl) phenyl] maleimide with phenyl urea derivatives (p-methyl, o-chloro and p-carboxy). They were characterized by FTIR, ¹H-NMR, mass spectra, elemental analyses and antimicrobial activities. These derivatives were investigated as thermal stabilizers for rigid poly(vinyl chloride) at 180 °C in air by measuring the rate of dehydrochlorination and the extent of discoloration. The results reveal the greater stabilizing efficiency of the investigated derivatives as shown by their longer thermal stability periods (Ts) and lower dehydrochlorination rates in relation to dibasic lead carbonate, cadmium-barium-zinc stearate and n-octyltin mercaptide industrial stabilizers. The stabilizing efficiency increases with the introduction of electron donating substituent groups in the aromatic ring of the stabilizer molecules. Moreover, the investigated stabilizers impart better color stability for the degraded samples as compared with the reference stabilizers.     

Disassembly and Mislocalization of AQP4 in Incipient Scar Formation after Experimental Stroke

There is an urgent need to better understand the mechanisms involved in scar formation in the brain. It is well known that astrocytes are critically engaged in this process. Here, we analyze incipient scar formation one week after a discrete ischemic insult to the cerebral cortex. We show that the infarct border zone is characterized by pronounced changes in the organization and subcellular localization of the major astrocytic protein AQP4. Specifically, there is a loss of AQP4 from astrocytic endfoot membranes that anchor astrocytes to pericapillary basal laminae and a disassembly of the supramolecular AQP4 complexes that normally abound in these membranes. This disassembly may be mechanistically coupled to a downregulation of the newly discovered AQP4 isoform AQP4ex. AQP4 has adhesive properties and is assumed to facilitate astrocyte mobility by permitting rapid volume changes at the leading edges of migrating astrocytes. Thus, the present findings provide new insight in the molecular basis of incipient scar formation.