Structural and Thermo-Physical Properties of 3C-SiC: High-Temperature and High-Pressure Effects

Silicon - Based on the density functional theory (DFT), a systematic theoretical investigation on the structural parameters and finite temperature thermo-physical properties of cubic silicon...     

Mechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneer

The objective of study was to evaluate some of the physical and mechanical properties of medium density fiberboard (MDF) panels laminated with veneer sheets compressed at different levels of pressure and temperature. Rotary peeled veneer samples of European beech (Fagus orientalis Lipsky) were compressed at temperatures of 150 °C, 180 °C, and 200 °C using 4 MPa and 6 MPa pressure for 8 min. Commercially produced MDF samples also were laminated with such compressed veneer sheets. Both modulus of elasticity (MOE) and modulus of rupture (MOR) of the specimens increased with increasing pressure and press temperature. Bending characteristics of the samples tested parallel to the grain orientation resulted in significantly higher values than that perpendicular to the grain orientation for each manufacturing parameter. Thickness swelling of the samples also was influenced by increased pressure but variation in press temperature did not result in any influence on dimensional stability. The findings of this work provide potential to produce sandwich type panels with improved properties. Initial results found in this study could be used to manufacture laminated panels with a fixed rate of adhesive while controlling press parameters as a function of the magnitude of pressure and temperature.     

The influence of moisture content of raw material on the physical and mechanical properties,surface roughness,wettability, and formaldehyde emission of particleboard composite

The objectives of this research were to investigate surface characteristics, physical (thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond strength) properties, and formaldehyde emission of particleboard composite, as affected by moisture content of wood. Three-layered particleboard panels manufactured from wood particles at five different moisture contents (20%, 40%, 60%, 80% and 95%). Roughness measurements, average roughness (R_a), mean peak-to-valley height (R_z), and maximum roughness (R_y), were taken from the sanded samples along and across the sandmarks using a fine stylus tracing technique. Contact angle measurements were obtained by using a goniometer connected with a digital camera and computer system. Statistical analysis showed significant differences in the surface roughness, contact angle, formaldehyde emission, physical and mechanical properties of the panels following moisture content. Based on the findings obtained from this study, an increase or decrease in the moisture content of wood beyond a certain limit, before chipping operations, negatively affected the wettability and smoothness of particles, and formaldehyde emission, physical and mechanical properties of particleboards.     

Mechanical and Thermal Properties of 3D-Printed Biocomposites of Polylactic Acid and Thermally Modified Wood Flour with Silver Nanoparticles

This study investigates the effects of thermal treatment and silver nanoparticles on the mechanical and thermal properties of additively manufactured wood/polylactic acid (PLA) specimens. The 5 and 10 wt% additions of the wood flour into the PLA matrix are done in the twin screw extruder. The test specimens are produced from the filaments with a diameter of 1.75 mm using 3D printer. The mechanical properties of the 3D-printed wood/PLA specimens are affected by the wood flour content, thermal treatment of wood, and silver nanoparticles. The 3D-printed neat PLA specimens have better mechanical properties than the wood flour-filled PLA specimens. The bending strength of the specimens enhances with increasing wood flour content while the tensile strength decreases. The increases in the mechanical properties reveal that the thermal treatment of the wood improves the compatibility between wood and PLA matrix, which hereby improves the interfacial adhesion. The addition of the silver nanoparticles positively affects the mechanical properties and it is more compatible with thermally modified wood particles as compared to the untreated wood particles.     

Memory Defect Tolerance Architectures for Nanotechnologies

Memory Built In Self Repair (BISR) is gaining importance since several years. Because defect densities are increasing in future submicron technologies, more advanced solutions may be required for memories to be produced in the upcoming nanometric CMOS process generations. Moreover, this problem will be exacerbated with nanotechnologies, where defect densities are predicted to reach levels of several orders of magnitude higher than in current CMOS technologies. For such defect densities, traditional memory repair is not adequate. This work presents several Built-In Self Repair techniques addressing memories affected by high defect densities as well as an evaluation of the area cost and yield. Statistical fault injection simulations were conducted and the obtained results show that BISR architectures can be used for future high defect technologies, providing close to 100% memory yield, by means of reasonable hardware cost. Thus, the extreme defect densities that many authors predict for nanotechnologies do not represent a show-stopper, at least as concerning memories.     

The Lodgepole × Jack Pine Hybrid Zone in Alberta, Canada: A Stepping Stone for the Mountain Pine Beetle on its Journey East Across the Boreal Forest?

Historical data show that outbreaks of the tree killing mountain pine beetle are often preceded by periods of drought. Global climate change impacts drought frequency and severity and is implicated in the range expansion of the mountain pine beetle into formerly unsuitable habitats. Its expanded range has recently reached the lodgepole × jack pine hybrid zone in central Alberta, Canada, which could act as a transition from its historical lodgepole pine host to a jack pine host present in the boreal forest. This field study tested the effects of water limitation on chemical defenses of mature trees against mountain pine beetle-associated microorganisms and on beetle brood success in lodgepole × jack pine hybrid trees. Tree chemical defenses as measured by monoterpene emission from tree boles and monoterpene concentration in needles were greater in trees that experienced water deficit compared to well-watered trees. Myrcene was identified as specific defensive compound, since it significantly increased upon inoculation with dead mountain pine beetles. Beetles reared in bolts from trees that experienced water deficit emerged with a higher fat content, demonstrating for the first time experimentally that drought conditions benefit mountain pine beetles. Further, our study demonstrated that volatile chemical emission from tree boles and phloem chemistry place the hybrid tree chemotype in-between lodgepole pine and jack pine, which might facilitate the host shift from lodgepole pine to jack pine.     

Thiophene-based molecular and polymeric semiconductors for organic field effect transistors and organic thin film transistors

Organic electronics has been a popular field for the last two decades, due to its potential to commercialize cheap-price and large-area flexible electronics. The devices based on organic compounds heavily rely on organic semiconductors (OSs). Primary challenge for materials chemist is the new OSs construction that has ameliorated attainment in organic thin film transistors (OTFTs) and organic field effect transistors (OFETs). The construction of air-stable (stable in air) n-channel OSs (electron-conducting materials) is particularly needed with capability comparable to that of p-channel materials (hole-conducting materials). In the last 10 years, there have been significant advancements in thiophene-based OSs. Thiophene-mediated molecules have a prominent role in the advancement of OSs. The main significance in thiophene-based molecules is their cheap-price (in comparison to silicon), processability at low temperature, structural flexibility, ability to be applied on flexible substrates, and high charge transport characteristics. In this paper, we review the progress in the performance of thiophene-based OSs that has been reported in the last 18 years, with a major emphasis on the last 10 years. This approach provides a crisp introduction to organic devices and catalogs progress toward the fabrication of thiophene containing p, n and ambipolar channel OSs, and discusses their characteristics. Finally, review discusses current challenges and future research directions for thiophene based OSs. This review would be beneficial for further developments in the technological performance. Moreover, this review will serve to accelerate knowledge and lays the foundation for improved applications. Hopefully, this struggle pushes the reader’s mind to consider new perspectives, think differently and forge new connections.     

Emergence of methicillin-resistant Staphylococcus aureus (MRSA) ST8 in raw milk and traditional dairy products in the Tizi Ouzou area of Algeria

Staphylococcus aureus is one of the leading causes of food-borne illness worldwide. Raw milk and dairy products are often contaminated with enterotoxigenic strains of this bacterium. Some of these strains carry antimicrobial resistance, leading to a potential risk for consumers. The aim of this study was to characterize S. aureus strains circulating in raw milk and traditional dairy products for carriage of staphylococcal enterotoxin (se) genes and antimicrobial resistance. Overall, 62 out of 270 samples (23%) were contaminated with S. aureus, and 69 S. aureus strains were identified. We studied the enterotoxin genes using 2 multiplex PCR targeting 11 se genes. Seventeen (24.6%) isolates carried one or more genes encoding for staphylococcal enterotoxins. The most commonly detected se genes were seb and sep, followed by seh, sea, and see. Using the disk diffusion method, we found that resistance to penicillin G and tetracycline was the most common. Eleven isolates of methicillin-resistant S. aureus (MRSA) carried the mecA gene. All MRSA isolates belonged to the same spa type (t024) and sequence type (ST8), and carried the seb and sep enterotoxin genes. However, none of them carried the Panton Valentine leukocidin gene (lukF/S-PV). The presence of enterotoxigenic S. aureus strains, including MRSA, in raw milk and dairy products, raises a serious public health concern, because these strains may cause food poisoning outbreaks, be disseminated to the population, or both.     

Removal of humic acid from water using adsorption coupled with electrochemical regeneration

A novel and economic waste water treatment technology comprised of adsorption coupled with electrochemical regeneration was introduced at the University of Manchester in 2006. An electrically conducting adsorbent material called Nyex? 1000 (Graphite intercalation based material) was developed for the said purpose. This adsorbent material delivered significantly lower adsorption capacity for the removal of a number of organic pollutants. With the aim to expand the scope of newly developed adsorbent material called Nyex? 2000, we studied the adsorption of humic acid followed by electrochemical regeneration. Nyex? 2000 is a highly electrically conducting material with an adsorption capacity almost twice that of Nyex? 1000 (intercalation based graphite compound) for humic acid. The adsorption of humic acid onto both Nyex? adsorbents was found to be fast enough keeping almost the same kinetics with approximately 50% of the adsorption capacity being achieved within the first twenty minutes. The parameters affecting the regeneration efficiency, including the treatment time, charge passed and current density, were investigated. The regeneration efficiency at around 100% for Nyex? 1000 & 2000 adsorbents saturated with humic acid was obtained using the charge passed of 8 and 22 Cg^?1 at a current density of 7mA cm^?2 during a treatment time of 30minutes, respectively.     

Study of Hydrology and Drought in the Flood Region of Sudan

ABSTRACT

An attempt is made to thoroughly investigate the important hydrological features ofhe flood region that is located in the southern part of Sudan. The hydrologic data that were used in the study include temperature, precipitation, sunshine duration. radiation, humidity, wind speed, and evaporation. The investigation also includes the stream flow records of the Nile River in the region. In this region, a huge amount of the Nile water is lost by evaporation and overspilling. The hydrological data of Malakal meteorological station, taken as the index station, and the long-term flow data of the White Nile and its principal tributary, the Sobat, have been analyzed. The effect of changes in the behavior of the hydrological factors on the degree of aridity is also assessed. The study clearly indicates significant changes in the hydrological behavior of the region characterized by an increase in temperature levels and a substantial reduction in rainfall and river flows.