Cost efficiency comparison of four video-based techniques for assessing upper arm postures

Many video-based techniques for assessing postures at work have been developed. Choosing the most appropriate technique should be based on an evaluation of different alternatives in terms of their ability to produce posture information at low input costs, i.e. their cost efficiency. This study compared four video-based techniques for assessing upper arm postures, using cost and error data from an investigation on hairdressers. Labour costs associated with the posture assessments from the video recordings were the dominant factor in the cost efficiency comparison. Thus, a work sampling technique associated with relatively large errors appeared, in general, to be the most cost-efficient because it was labour-saving. Measurement bias and other costs than labour cost for posture assessment influenced the ranking and economic evaluation of techniques, as did the applied measurement strategy, i.e. the numbers of video recordings and repeated assessments of them. PRACTITIONER SUMMARY: The cost efficiency of four video-based techniques for assessing upper arm postures was compared. Work sampling techniques were in general more cost efficient than continuous observations since they were labour-saving. Whilst a labour cost dominated the comparison, 'hidden costs', bias and measurement strategy also influenced this dominance.     

An Organoid for Woven Bone

Bone formation (osteogenesis) is a complex process in which cellular differentiation and the generation of a mineralized organic matrix are synchronized to produce a hybrid hierarchical architecture. To study the mechanisms of osteogenesis in health and disease, there is a great need for functional model systems that capture in parallel, both cellular and matrix formation processes. Stem cell-based organoids are promising as functional, self-organizing 3D in vitro models for studying the physiology and pathology of various tissues. However, for human bone, no such functional model system is yet available. This study reports the in vitro differentiation of human bone marrow stromal cells into a functional 3D self-organizing co-culture of osteoblasts and osteocytes, creating an organoid for early stage bone (woven bone) formation. It demonstrates the formation of an organoid where osteocytes are embedded within the collagen matrix that is produced by the osteoblasts and mineralized under biological control. Alike in in vivo osteocytes, the embedded osteocytes show network formation and communication via expression of sclerostin. The current system forms the most complete 3D living in vitro model system to investigate osteogenesis, both in physiological and pathological situations, as well as under the influence of external triggers (mechanical stimulation, drug administration).     

Effects of pomegranate sauce on quality of marinated anchovy during refrigerated storage

Effects of pomegranate sauce on the quality of marinated anchovy during storage at 4 °C were investigated. Anchovy were marinated with 30 g/L acetic acid and 150 g/L salt, put into glass jars, filled with either sunflower oil or pomegranate sauce and stored at 4 °C. Total volatile basic nitrogen (TVB-N) and trimethylamine (TMA-N) values increased during the storage. Higher values for free fatty acid (FFA), conjugated diens (k-dien) and para-anisidine (p-Av) were found in samples with sunflower oil than those with pomegranate sauce. Samples in pomegranate sauce showed better oxidative stability. Higher taste and flavour and lower appearance scores were found for samples in pomegranate sauce than those samples in sunflower oil. It was found that pomegranate sauce was as least effective as the traditional sunflower oil to keep quality. Pomegranate sauce also produced desirable taste and flavour but the coloration should be studied in further studies.     

Separation of squalene from olive oil deodorizer distillate using supercritical fluids

In this study, an integrated strategy using supercritical fluids for extraction of squalene from olive oil deodorizer distillate (OODD), one of the most important by‐products of the olive oil refining process is presented. First, OODD was esterified in supercritical methanol, and then squalene was extracted from the sample consisting of 66% methyl ester using supercritical CO₂. The extraction conditions, i.e., pressure (88.2–121.8 bar), temperature (41.6–58.4°C) and extraction time (129.6–230.4 min), were optimized via RSM to achieve the highest squalene content. The optimal results were obtained at a temperature of 52.05°C, pressure of 104.8 bar and extraction time of 180 min. Consequently, two kinds of value‐added products such as biodiesel (up to 96% FAME, in extract) and olive squalene (up to 75%, in raffinate) were produced in shorter processing times when compared with distillation results of 70 h. Practical applications: Traditionally, squalene is extracted from liver oil of rare deep‐sea sharks. Here we present the recovery of vegetal squalene in high purity from OODD. Our approach also presents a simple, reliable, and mobile solution. Squalene is widely used in cosmetics as a protective agent and natural moisturizer and as an adjuvant in influenza vaccines.     

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimization of stiffness, strength, and toughness is a challenge for any material, and commercial PLA is well-known to be inherently brittle and temperature-sensitive and to show poor melt elasticity. In this study, we report that high-shear mixing with cellulose nanocrystals (CNC) leads to significant improvements in the toughness, heat resistance, and melt elasticity of PLA while further enhancing its already outstanding room temperature stiffness and strength. This is evidenced by (i) one-fold increase in the elastic modulus (6.48 GPa), (ii) 43% increase in the tensile strength (87.1 MPa), (iii) one-fold increase in the strain at break (∼6%), (iv) two-fold increase in the impact strength (44.2 kJ/m²), (v) 113-fold increase in the storage modulus at 90°C (787.8 MPa), and (vi) 10³-fold increase in the melt elasticity at 190°C and 1 rad/s (∼10⁵ Pa) via the addition of 30 wt% CNC. It is hence possible to produce industrially viable, stiff, strong, tough, and heat resistant green materials with improved melt elasticity through high-shear mixing.     

Seasonal variations in proximate and elemental composition of pearl oyster (Pinctada radiata,Leach, 1814)

Pearl oysters (Pinctada radiata) were investigated for proximate and elemental composition throughout the year. Oysters were collected bimonthly by hand during scuba diving from the Gulf of Antalya. Ranges of dry matter, protein, fat and ash contents were 144.7–209.8, 65.9–160.4, 4.3–10.9 and 4.6–27.0 g kg^?1, respectively. While the highest protein and fat values were found in the summer months, the highest dry matter and ash contents were found in the winter months. The highest element contents were found in the spring and autumn months. Cadmium and zinc were found to be over the legislative limits, while copper was below, throughout year. The highest concentration among the elements was obtained for zinc. Copyright © 2006 Society of Chemical Industry     

Separation and purification of hyaluronic acid by glucuronic acid imprinted microbeads

The purification of hyaluronic acid (HA) is relatively significant to use in biomedical applications. The structure of HA is formed by the repetitive units of glucuronic acid and N-acetyl glucosamine. In this study, glucuronic acid-imprinted microbeads have been supplied for the purification of HA from cell culture (Streptococcus equi). Histidine-functional monomer, methacryloylamidohistidine (MAH) was chosen as the metal-complexing monomer. The glucuronic acid-imprinted poly(ethyleneglycoldimethacrylate-MAH-Copper(II)) [p(EDMA-MAH-Cu²⁺)] microbeads have been synthesized by typical suspension polymerization procedure. The template glucuronic acid has been removed by employing 5 M methanolic KOH solution. p(EDMA-MAH-Cu²⁺) microbeads have been characterized by elemental analysis, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) images and swelling studies. Moreover, HA adsorption experiments have been performed in a batch experimental set-up. Purification of HA from cell culture supernatant has been also investigated by determining the hyaluronidase activity using purified HA as substrate. The glucuronic acid imprinted p(EDMA-MAH-Cu²⁺) particles can be used many times with no significant loss in adsorption capacities. Also, the selectivity of prepared molecular imprinted polymers (MIP) has been examined. Results have showed that MIP particles are 19 times more selective for glucuronic acid than N-acetylglucose amine.     

Occupational posture exposure among construction electricians

The aim of this study is to record, objectively describe and compare working postures of Brazilian and Norwegian construction electricians. Postures of the upper arms, head, and neck during work and breaks were quantified by means of inclinometry for a representative sample of 12 Brazilian and 12 Norwegian electricians in the construction industry during a full work-shift. Despite that differences were found between specific work-related factors, Brazilian and Norwegian workers revealed a high and very similar level and pattern of postures for all evaluated body regions, suggesting that results could be extrapolated to other electricians. Upper arm elevation was high and similar for both groups and head flexion and extension was pronounced compared to other occupations. Thus, extreme postures were identified for construction electricians in both countries, with similar exposure pattern also for defined tasks (planning, support and wiredraw), suggesting that this job is risky regardless organizational differences.     

Potential for carbon adsorption on concrete: surface XPS analyses

The concrete industry is a contributor to the global carbon cycle particularly with respect to the contribution of carbon dioxide in the manufacturing of cement (calcination). The reverse reaction of carbonation is known to occur in concrete, but is usually limited to exterior surfaces exposed to carbon dioxide and humidity in the air. As alternate concrete uses expand which have more surface area, such as crushed concrete for recycling, it is important to understand surface adsorption of carbon dioxide and the positive impacts it might have on the carbon cycle. X-ray photoelectron spectroscopy (XPS) is used in this study to evaluate carbon species on hydrated cement mortar surfaces. Initial estimates for carbon absorption in concrete using othertechniques predictthe potential for carbonate species to be a fraction of the calcination stoichiometric equivalent The XPS results indicate that there is a rapid and substantial uptake of carbon dioxide on the surfaces of these mortars, sometimes exceeding the calcination stoichiometric equivalents, indicative of carbon dioxide surface complexation species. On pure calcite, the excess is on the order of 30%. This accelerated carbon dioxide surface adsorption phenomenon may be importantfor determining novel and effective carbon sequestration processes using recycled concrete.