PURIFICATION OF CELLULASE FROM FUSARIUM MONILIFORME AND ITS APPLICATION TO THE PRODUCTION OF RED BEAN STARCH PRECIPITATE

To investigate the effect of cellulase on increase of recovery of red bean starch precipitate, cellulases from Fusarium moniliforme were purified and applied to the production of red bean starch precipitate. Oneã-glucosidase, two filter paper degradation enzymes (FPase), one endo-ã-glucanase (endo-Cx) and one exo-ã-glucanase (exo-Cx) were purified by ammonium sulfate fractionation, gel filtration and ion-exchange chromatography. Optimum temperature and time of submersion of red beans for reduction of hardness was 50°C and 2 h. Maximum sedimentation rate of starch was obtained when the red bean was incubated in a mixture of 0.004 units/mL of FPase and 0.3 units/mL of CMCase, and maximum recovery of red bean starch precipitate was obtained with 0.004 units/mL of FPase and 0.2 units/mL of CMCase. Enzyme treatment reduced suspended solids about 40% in waste water compared with control. A little hydrolysis in cell wall, intercellular space and interstarch granular space was observed.     

Scanning Calorimetric Behavior of Tilapia Myosin and Actin due to Processing of Muscle and Protein Purification

The thermal behavior of tilapia muscle proteins was investigated by differential scanning calorimetry at various stages in the processing of surimi and during purification of myosin and actin. A shift in the thermal transition of actin to lower temperature was observed and the enthalpies of denaturation for both actin and myosin decreased with further processing. Salt addition also induced shifts in denaturation transitions to lower temperatures and decreased enthalpies of denaturation.     

Differential Scanning Calorimetry of Fish Muscle: The Effect of Processing and Species Variation

Differential Scanning Calorimetry (DSC) has been used to study the thermal properties of fish muscle proteins and to measure the extent of their denaturation under various processing conditions. Fish myosin was susceptible to denaturation by frozen storage and dehydration. Denaturation of certain fish proteins was partially reversible. Although fish myosin was very unstable, its thermal stability was found to increase in species adapted, to higher environmental temperatures.     

6.5% efficient perovskite quantum-dot-sensitized solar cell

Highly efficient quantum-dot-sensitized solar cell is fabricated using ca. 2-3 nm sized perovskite (CH(3)NH(3))PbI(3) nanocrystal. Spin-coating of the equimolar mixture of CH(3)NH(3)I and PbI(2) in γ-butyrolactone solution (perovskite precursor solution) leads to (CH(3)NH(3))PbI(3) quantum dots (QDs) on nanocrystalline TiO(2) surface. By electrochemical junction with iodide/iodine based redox electrolyte, perovskite QD-sensitized 3.6 μm-thick TiO(2) film shows maximum external quantum efficiency (EQE) of 78.6% at 530 nm and solar-to-electrical conversion efficiency of 6.54% at AM 1.5G 1 sun intensity (100 mW cm(-2)), which is by far the highest efficiency among the reported inorganic quantum dot sensitizers.     

MAGNETOTHERMAL CONVECTION OF POLYATOMIC GASES IN HOMOGENEOUS MAGNETIC FIELDS Part I: Theory

The theory of magnetothermal convection of gases in homogeneous magnetic fields is developed from magnetogas-dynamic theory. Application is made to nonionized paramagnetic and diamagnetic gases between parallel vertical plates. An additive contribution to the natural thermal convection heat transfer results from the temperature dependence of the magnetic permeability of the gas. The result may be expressed parametrically in a dimensionless magnctoconvection number, which characterizes the magnetothermal contribution to the total heat transfer just as the Grashof number characterizes the natural thermal contribution. For oxygen gas at low pressure the magnetothermal contribution is shown to be proportional to p ³ H ²(ΔT)² /ηT ⁵ where p is the gas pressure, H is the magnetic field strength, ΔT is the temperature difference between plates, η is the viscosity coefficient and T is the absolute temperature.     

A NEW TOOL FOR NUCLEATE BOILING RESEARCH

A new tool for the study of nucleate boiling heat transfer has been developed. Photographic etching was shown to be effective in the manufacture of copper lest surfaces containing precise arrays of artificial pits, with densities as high as 2742 pits/cm².

The pits were shallow segments of spheres, with depth: diameter ratios on the order of 0.1. Pit diameters were on the order of 0.003 cm. Data showed that the pits significantly affected the characteristic boiling curves and critical fluxes for the surfaces studied while boiling Freon 113 at one atmosphere pressure.

Photoetching can be used in the future to produce a wide variety of test surface textures or site arrays. Careful control of such surface conditions may well lead to a better understanding of the nucleate boiling phenomena.     

Theory of a slow wave cyclotron amplifier

A new type of travelling wave amplifier is proposed which features a slow wave structure and wide bandwidth operation. It is bused on the cyclotron interaction between a slow electromagnetic wave and helically moving electrons. Gain and bandwidths are calculated including the effect of beam velocity spread. It is shown that a bandwidth as high as 50% could be achieved with beam velocity spread?1%.     

A FERROELECTRIC BASED PASSIVE RFID TAG FOR UHF (860–960 MHz) BAND

ABSTRACT

For a longer working distance between passive tags and the reader, the ferroelectric based technologies are proposed in UHF (860–960 MHz) band transponder. The small ferroelectric capacitor layout area with a stacked capacitor structure over circuit region and a large dielectric permittivity of 250 to 500 and small 1T1C cell array layout area with simple 2T2C based reference scheme allow small chip size. The low operation voltage of 1.5 V to 2.0 V without high voltage boosting scheme also contribute to small power consumption and low cost.     

Enhancement of Ferroelectric Properties of Pb(Zr,Ti)O3 Films Grown by Metal-Organic Chemical Vapor Deposition on Noble-Alloy Bottom Electrodes

Pb(Zr,Ti)O₃ (PZT) films grown on Ir electrodes by a metal-organic chemical vapor deposition (MOCVD) have suffered from high leakage and rough surface. We sputtered Pt and Ir simultaneously onto Ti/SiO₂/Si substrates and formed Ir-Pt alloy bottom electrodes with various compositions. With an optimal composition of Ir and Pt, PZT films grown by MOCVD on this substrate showed smoother surface and suppressed leakage via the bottom interface. At the specific composition of Ir and Pt, two different phases seemed to be acquired. They constituted the electrodes and affected the PZT grain nucleation independently so that the grains with different origins grew and restrained the vicinal grains, and finally soothed the faceted-grain-formation. No fatigue was observed even in PZT on Ir-Pt alloy with much Pt content.     

Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction

In this study, a rigorous methodology for quantifying recrystallization kinetics by electron backscatter diffraction is proposed in order to reduce errors associated with the operator's skill. An adaptive criterion to determine adjustable grain orientation spread depending on the recrystallization stage is proposed to better identify the recrystallized grains in the partially recrystallized microstructure. The proposed method was applied in characterizing the microstructure evolution during annealing of interstitial‐free steel cold rolled to low and high true strain levels of 0.7 and 1.6, respectively. The recrystallization kinetics determined by the proposed method was found to be consistent with the standard method of Vickers microhardness. The application of the proposed method to the overall recrystallization stages showed that it can be used for the rigorous characterization of progressive microstructure evolution, especially for the severely deformed material.