Optimization of superconducting solenoid

The maximum current of a superconducting solenoid is restricted by the maximum magnetic field. Therefore current density in low magnetic field regions becomes much smaller than the critical current density at those magnetic fields. This means that the superconductors are used inefficiently. A simple way to use superconductors more efficiently is to divide the solenoid into several sections according to their magnetic field strength. A method of minimizing the winding volume of the superconducting solenoid by such a division is described using certain approximations. This method is also very convenient for designing the solenoid with the highest current density or the most economical solenoid made with different superconducting materials.     

Fabrication of an optical directional coupler of CdTe by electron beam lithography and ion etching

Various kinds of high resolution techniques such as ion etching, chemical etching, ion implantation, and electron beam lithography are studied for fabricating CdTe optical integrated circuits. It is found that the ion-etching rate of CdTe is high and has only a small dependence on crystal orientation. A special chemical etching solution for aluminum on CdTe that does not corrode CdTe and proton implanted CdTe is used for high resolution patterning of CdTe. The smooth patterns in PMMA resist produced by an electron beam exposure is replicated deep into 2.5 μm of CdTe face through the aluminum layer. Rib guides and a rib-type optical directional coupler are fabricated from planar guides by using proton implantation which makes refractive index change on CdTe face. The two-dimensional optical confinement is observed. A coupling coefficient ofk simeq 0.39mm^-1is observed in the rib-type optical directional coupler.     

Electrooptic Bragg-deflection modulators in corrugated waveguides

An electrooptic Bragg-deflection modulator using a corrugated waveguide is discussed. A coupling between transmitted and diffracted waves caused by a Bragg diffraction grating is controlled by an incident angle change. By combining a grating and a prism deflector, a large angle deflection is performed with a low driving voltage. Numerical examples are presented for LiNbO3waveguides, and are compared with those of the modulator where the coupling is controlled by an index change.     

Investigation of texturization for crystalline silicon solar cells with sodium carbonate solutions

We investigate a new texturization technique for crystalline silicon solar cells with sodium carbonate (Na₂CO₃) solutions. We show the dependence of the hemispherical surface reflectance on solution temperature, the etching time and the Na₂CO₃ concentration. Furthermore, we investigate what element in Na₂CO₃ solution influences the texturing for reducing the texturing time. As a result of experiments, we find it possible to get low reflectance in a shorter texturing time by the addition of NaHCO₃. The size of texture becomes smaller by the addition of NaHCO₃ but the etching rate does not change. We conclude carbonic ion and/or its compound seems to play an important role as the initiator of pyramidal structure. This texturing method is cost effective because there is no need of expensive IPA, and the surface reflectance is reduced sufficiently in a short time. This method is promising for a large-scale production of crystalline silicon solar cells.     

Femtosecond laser induced micropatterning of graphene film

Micropatterning of CVD synthesized large area graphene film is demonstrated with femtosecond laser cutting process. Homogenous microribbon or other patterned structure can be fabricated without using any resist or other material containing the graphene surface within a very short duration. Once the suitable laser beam doses are determined, sharp edge profile and clean etching are obtained. Scanning electron microscopic study shows that the patterned microribbon is having 5 μm width and mm in length. The width of the patterned microribbon can be controlled with control of laser energy and preprogramming of laser ablation process. Raman study at the edge of the microribbon shows increase in D peak and appearance of D + G mode, signifying edge defects. The defect can be explained from the breaking of sp² carbon hybridization with oxidation due to laser etching. The Raman study shows no amorphous carbon formation with laser cutting of the graphene film. The presented process shows a simple way to make patterned microribbon on large area graphene sheet which can be extremely necessary for microelectronics fabrication.     

Precipitates in As-Cast and Heat-Treated ASTM F75 Co-Cr-Mo-C Alloys Containing Si and/or Mn

The effect of the addition of Si or Mn to ASTM F75 Co-28Cr-6Mo-0.25C alloys on precipitate formation as well as dissolution during solution treatment was investigated. Three alloys—Co-28Cr-6Mo-0.25C-1Si (1Si), Co-28Cr-6Mo-0.25C-1Mn (1Mn), and Co-28Cr-6Mo-0.25C-1Si-1Mn (1Si1Mn)—were heat treated from 1448 K to 1548 K (1175 °C to 1275 °C) for a holding time of up to 43.2 ks. In the case of the as-cast 1Si and 1Si1Mn alloys, the precipitates were M₂₃C₆-type carbide, η phase (M₆C-M₁₂C–type carbide), and π phase (M₂T₃X-type carbide with a β-Mn structure), while in the case of the as-cast 1Mn alloy, M₂₃C₆-type carbide and η phase were detected. The 1Si and 1Si1Mn alloys required longer heat-treatment times for complete precipitate dissolution than did the 1Mn alloys. During the solution treatment, blocky dense M₂₃C₆-type carbide was observed in all the alloys over the temperature range of 1448 K to 1498 K (1175 °C to 1225 °C). At the heat-treatment temperature of 1523 K (1250 °C), starlike precipitates with stripe patterns—comprising M₂₃C₆-type carbide and metallic face-centered-cubic (fcc) γ phase—were detected in the 1Si and 1Si1Mn alloys. A π phase was observed in the 1Si and 1Si1Mn alloys heat treated at 1523 K and 1548 K (1250 °C and 1275 °C) and in the 1Mn alloy heat treated at 1548 K (1275 °C); its morphology was starlike-dense. The addition of Si appeared to promote the formation of the π phase in Co-28Cr-6Mo-0.25C alloys at 1523 K and 1548 K (1250 °C and 1275 °C). Thus, the addition of Si and Mn affects the phase and morphology of the carbide precipitates in biomedical Co-Cr-Mo alloys.     

Determination of bovine lactoferrin in lactoferrin-supplemented dairy products and raw milk by an automated latex assay

Latex immune agglutination method with a multipurpose auto-analyser (the automated latex assay) was validated for determination of bovine lactoferrin (BLF) in various dairy products. Reproducibility-within-laboratory (intermediate precision) due to day for infant formula, UHT milk and yogurt supplemented with BLF at 50 mg/100 g for infant formula and UHT milk, and at 100 mg/100 g for yogurt were 1.62 to 3.10 mg/100 g. Reproducibility-within-laboratory due to analysis (morning, noon, and evening) for raw milk was 1.59 mg/100 g. Trueness, accuracy in determining known amounts added for BLF-supplemented dairy products was -4.7 to -2.0 mg/100 g. BLF concentration in raw milks was 20.3 to 21.8 mg/100 g. Although interference by the matrixes took place in infant formula and raw milk, BLF assays were accurately carried out by 2000-fold dilution or standard-addition method. Automated latex assay for BLF is simple, rapid, precise and accurate enough for a routine method in various dairy products containing BLF.     

The genome organization of the broad bean necrosis virus (BBNV)

In this study the effect of lipoprotein lipase (LPL) on the selective uptake of high density lipoprotein (HDL) cholesteryl esters (CE) by hepatic cells was investigated. Human HDL3 (d 1.125-1.21 g/ml) was radiolabeled with 125I in the protein moiety and with 3H in the CE moiety. LPL was prepared from bovine milk. Human hepatocytes in primary culture and human Hep3B hepatoma cells were incubated in medium containing doubly radiolabeled HDL3 with or without LPL. Without LPL, apparent HDL3 particle uptake according to the lipid tracer (3H) was in excess of that due to the protein label (125I) indicating selective CE uptake from HDL3. Addition of LPL increased selective CE uptake up to 7-fold. This stimulation of HDL3 selective CE uptake was independent of the lipolytic activity of LPL as suggested by several experimental approaches. Cell surface heparan sulfate proteoglycan deficiency decreased the LPL-mediated increase in selective CE uptake suggesting an important role for these molecules. In low density lipoprotein (LDL) receptor- or LDL receptor-related protein-(LRP)-deficient cells, LPL increased selective CE uptake as it did in normal cells yielding no evidence that these receptors play a role in the LPL effect on selective CE uptake. In summary, lipoprotein lipase increases the selective uptake of high density lipoprotein-associated cholesteryl ester by hepatic cells in culture. This effect is dependent on cell surface heparan sulfate proteoglycans but independent of lipolysis and of endocytosis mediated by low density lipoprotein receptor-related or low density lipoprotein receptors.     

Two-dimensional gel electrophoretic analysis of the changes after immortalization of human cells: decrease of intracellular alpha-2-macroglobulin fragment

To study the mechanisms of immortalization of human cells, an early step in cancer development, we compared the cellular proteins of normal and immortalized human fibroblasts. Two-dimensional gel electrophoresis showed that one spot with a molecular mass 20 kDa and an isoelectric point of 6.0, became significantly smaller after immortalization of human cells. Further, the spot was rarely observed in four human liver cancer cell lines. Investigation of the N-terminal amino acids revealed that the spot was a fragment of alpha-2-macroglobulin. Although the 20 kDa fragment contains methionine, the spot was not labeled with [35S]methionine. Thus we concluded that the spot might be derived from the culture medium. These results indicated that intracellular metabolism of a-2-macroglobulin, which is a multifunctional protease inhibitor, changed after the cells were transformed.     

Simultaneous MIDCAB and subtotal gastrectomy in an elderly patient with severe ischemic heart disease

An 81 year old man with severe ischemic heart disease and left ventricular dysfunction was scheduled for a subtotal gastrectomy for his advanced gastric cancer. His cardiac function was so poor that we performed minimally invasive coronary artery bypass grafting (MIDCAB; coronary artery bypass grafting without cardiopulmonary bypass for LAD through a small left thoracotomy), just before the abdominal operation. Anesthesia was induced and maintained with fentanyl, vecuronium and sevoflurane. To control heart rate below 60 bpm during local coronary occlusion for bypass grafting, edrophonium 5 mg was administered just before the occlusion. During the bypass grafting procedure, the patient's heart rate was maintained at 50-60 bpm and his hemodynamic profile slightly declined but was permissible. After bypass grafting, his cardiac performance was improved with low dose dobutamine. Subsequently subtotal gastrectomy was carried out. His postoperative course was uneventful. Combined MIDCAB and abdominal operation may be beneficial for selected patients with severe ischemic heart disease.