Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

The microbiology of sheep carcasses processed in a modern Indian abattoir

A study has been conducted on the microbiology of sheep carcasses processed in a modern abattoir. The data revealed that careful handling at the different stages of processing of sheep reduced the level of microbial contamination of carcasses. Processing steps such as evisceration and washing did not increase the microbial counts on the carcass surface. Sources of microbial contamination in the abattoir were examined. It was observed that skin, floor washings, intestinal contents and gambrels were the major sources of microbial contamination. Seasonality did not have any effect on the microbial contamination of carcasses. The study revealed that total plate counts in 86·6% of the carcasses ranged between 3·0–4·9log/cm². The counts of coliforms, staphylococci, enterococci and psychrotrophs were low. Pathogens such as Salmonella were not detected. The microbial counts were well within the generally acceptable levels. These findings demonstrated hygienic handling of carcasses. Shoulder and neck are the critical points for microbiological sampling as these sites showed higher microbial counts. Micrococcus and Staphylococcus predominated among microorganisms associated with carcasses. It was noted that differences occurred in microbial types of carcasses processed in tropical and temperate climates. The data generated in a model facility procided useful information for improving meat handling practices.     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

Cumin Prevents 17β-Estradiol-Associated Breast Cancer in ACI Rats

Breast cancer (BC) is a leading cause of cancer deaths in women in less developed countries and the second leading cause of cancer death in women in the U.S. In this study, we report the inhibition of E2-mediated mammary tumorigenesis by Cuminum cyminum (cumin) administered via the diet as cumin powder, as well as dried ethanolic extract. Groups of female ACI rats were given either an AIN-93M diet or a diet supplemented with cumin powder (5% and 7.5%, w/w) or dried ethanolic cumin extract (1%, w/w), and then challenged with subcutaneous E2 silastic implants (1.2 cm; 9 mg). The first appearance of a palpable mammary tumor was significantly delayed by both the cumin powder and extract. At the end of the study, the tumor incidence was 96% in the control group, whereas only 55% and 45% animals had palpable tumors in the cumin powder and extract groups, respectively. Significant reductions in tumor volume (660 ± 122 vs. 138 ± 49 and 75 ± 46 mm³) and tumor multiplicity (4.21 ± 0.43 vs. 1.16 ± 0.26 and 0.9 ± 0.29 tumors/animal) were also observed by the cumin powder and cumin extract groups, respectively. The cumin powder diet intervention dose- and time-dependently offset E2-related pituitary growth, and reduced the levels of circulating prolactin and the levels of PCNA in the mammary tissues. Mechanistically, the cumin powder diet resulted in a significant reversal of E2-associated modulation in ERα, CYP1A1 and CYP1B1. Further, the cumin powder diet reversed the expression levels of miRNAs (miR-182, miR-375, miR-127 and miR-206) that were highly modulated by E2 treatment. We analyzed the composition of the extract by GC/MS and established cymene and cuminaldehyde as major components, and further detected no signs of gross or systemic toxicity. Thus, cumin bioactives can significantly delay and prevent E2-mediated mammary tumorigenesis in a safe and effective manner, and warrant continued efforts to develop these clinically translatable spice bioactives as chemopreventives and therapeutics against BC.     

金属粉末注射成形技术的最新研究动态与发展趋势

简要阐述了粉末注射成形技术的特点与应用 ,并从粉末的制备、粘结剂体系的设计、注射成形过程及其计算机模拟等几个方面阐明了粉末注射成形技术的最新研究动态 ,最后提出了粉末注射成形技术的重要发展趋势     

The heterogeneous nucleation of microcellular foams assisted by the survival of microvoids in polymers containing low glass transition particles. Part I: Mathematical modeling and numerical simulation

The existing models based on classical nucleation theory are not able to explain satisfactorily the nucleation phenomenon of microcellular foams in thermoplastics. Here, we extend the analysis of Kweeder (24), who developed a new model that considers the presence of microvoids, resulting from the thermal processing history of the polymer, as potential nucleation sites. The nucleation model “concentrates” on the stresses and thus void formations in the rubber particles. Since these are pre-existing microvoids, bubble nucleation depends on the survival of these voids to grow rather than the formation of a new phase as modeled by classical nucleation theory. The population of viable microvoids with a sufficiently large radius to survive and overcome surface and elastic forces has been modeled to yield the cell density. A log-normal distribution, which relates to the rubber particle size, has been used to model the distribution of microvoids in the polymer composite material. The model depends on various process parameters such as saturation pressure, foaming temperature, concentration of nucleating agents, solubility of the blowing agent in the polymer, and the modulus. High impact polystyrene (HIPS) was added to polystyrene to obtain polymers with different concentrations of rubber gel particles, the nucleating agent, and used here for this study.     

Plaster of Paris activated supersulfated slag cement

Hydration and strength behavior of supersulfated cement produced by activating a granulated Indian blastfurnace slag by plaster of Paris has been investigated. It is shown that plaster of Paris is a better activator than the conventional hard burnt gypsum (anhydrite) at least for a class of blastfurnace slags which are ordinarily considered less than ideal for this purpose. The setting characteristics of the plaster of Paris activated slag were controlled by small additions of a set retarder which does not adversely affect the strength properties of the cement. X-ray analysis and DTA have been used to identify the hydration products, interpret the strength data, and to compare the plaster of Paris activated cement with anhydrite activated slag cement.     

Flow Regime Maps for Flow of Liquid Through Downcomer in a Turbulent Bed Contactor

The provision of a downcomer to classical turbulent bed Contactor (TBC) increases the gas treating capacity of the equipment. When the downcomer is provided, it is expected that all the liquid passes through the downcomer only without any liquid flow through the distributor. In the present study, the operational regime for the flow of liquid only through the downcomer is experimentally evaluated for various geometric parameters and particle characteristics. It is observed that the preferred operational regime without dumping and weeping increases with an increase in Archimedes number and downcomer diameter, and decreases with an increase in static bed height and downcomer weir height. Correlations are proposed to satisfactorily predict experimentally observed operational regime.     

Continuous Self‐Collision Detection for Deformable Surfaces Interacting with Solid Models

In this paper, we propose a new continuous self‐collision detection (CSCD) method for a deformable surface that interacts with a simple solid model. The method is developed based on the radial‐view‐based culling method. Our method is suitable for the deformable surface that has large contact region with the solid model. The deformable surface may consist of small round‐shaped holes. At the pre‐processing stage, the holes of the deformable surface are filled with ghost triangles so as to make the mesh of the deformable surface watertight. An observer primitive (i.e. a point or a line segment) is computed so that it lies inside the solid model. At the runtime stage, the orientations of triangles with respect to the observer primitive are evaluated. The collision status of the deformable surface is then determined. We evaluated our method for several animations including virtual garments. Experimental results show that our method improves the process of CSCD.     

Swelling behavior of hydroxyapatite‐filled chitosan–poly(acrylic acid) polyelectrolyte complexes

A family of hydroxyapatite (HAP)‐filled chitosan (CHI)–poly(acrylic acid) (PAA) polyelectrolyte complexes was prepared for the development of a degradable biocompatible organic matrix with nascent HAP that will degrade in vivo over a period of time. The effects of complexation on the degradation profile of the composites as well as the interaction between the CHI–PAA matrix and HAP in the composite system were evaluated by studying the swelling behavior of these composites in phosphate‐buffered saline (PBS) by varying their CHI–PAA ratio and HAP content. All composite systems showed a general trend of three stages of swelling with the variation in the degree of equilibrium swelling. The percentage weight gain initially decreased in a linear way with increases in the HAP weight percentages, leading to a first equilibrium swelling, represented by the plateau; further increased to a greater extent; and finally stabilized. The CHI/PAA/HAP composites were stable in PBS up to a period of more than 45 days whereas the 50/50 CHI/PAA control sample showed a single equilibrium attained after a period of 288 h. Further exposure of the specimen to the medium led to its disintegration. It was also observed that, even though CHI and PAA were capable of binding HAP, because of the lack of efficient binding, the integrity of the CHI–HAP and PAA–HAP composites were lost within 48 h. The 50/50/80 CHI/PAA/HAP composition showed the minimum amount of swelling in the series. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4716–4722, 2006