Analysis of polarization plane rotation characteristic in 2D photonic crystal waveguide with chiral medium by condensed node spatial network

Using the photonic band gap in photonic crystals, the fundamental waveguide structures for the light wavelength range have been developed. Based on the fine structure of these many functional devices have been proposed by analytical or numerical simulation methods and the experiments of trial manufacture. In this paper, the treatment of chiral dielectric in the Condensed Node Spatial Network for the vector potential is explained, and we show the polarization plane rotation property in air‐hole and pillar type photonic crystal waveguide structures with the chiral medium substrate. Then, we show the fundamental advantage of the air‐hole type photonic crystal waveguide structure in application to a mode converter. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(1): 7–14, 2005; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20098     

The oxygen and carbon monoxide reactions of heme oxygenase

The O2 and CO reactions with the heme, alpha-hydroxyheme, and verdoheme complexes of heme oxygenase have been studied. The heme complexes of heme oxygenase isoforms-1 and -2 have similar O2 and CO binding properties. The O2 affinities are very high, KO2 = 30-80 microM-1, which is 30-90-fold greater than those of mammalian myoglobins. The O2 association rate constants are similar to those for myoglobins (kO2' = 7-20 microM-1 s-1), whereas the O2 dissociation rates are remarkably slow (kO2 = 0.25 s-1), implying the presence of very favorable interactions between bound O2 and protein residues in the heme pocket. The CO affinities estimated for both isoforms are only 1-6-fold higher than the corresponding O2 affinities. Thus, heme oxygenase discriminates much more strongly against CO binding than either myoglobin or hemoglobin. The CO binding reactions with the ferrous alpha-hydroxyheme complex are similar to those of the protoheme complex, and hydroxylation at the alpha-meso position does not appear to affect the reactivity of the iron atom. In contrast, the CO affinities of the verdoheme complexes are >10,000 times weaker than those of the heme complexes because of a 100-fold slower association rate constant (kCO' approximately 0. 004 microM-1 s-1) and a 300-fold greater dissociation rate constant (kCO approximately 3 s-1) compared with the corresponding rate constants of the protoheme and alpha-hydroxyheme complexes. The positive charge on the verdoporphyrin ring causes a large decrease in reactivity of the iron.     

Factors regulating SCC antigen expression in squamous cell carcinoma of the uterine cervix

Expression of squamous cell carcinoma (SCC) antigen emerged concurrently with squamous formation of the uterine cervix and increased during the neoplastic transformation of the cervical squamous epithelium. SCC antigen expression differed considerably among the histomorphologic cell types of cervical carcinoma. Large cell nonkeratinizing carcinoma contained high levels of the antigen. In contrast, no appreciable expression of SCC antigen was observed in small cell nonkeratinizing carcinoma. The pattern of SCC antigen expression closely coincided with EGF receptor (EGF-R) expression in cervical squamous neoplasia. This suggests that the expression of SCC and EGF-R in cervical carcinoma is related to the differentiation or dedifferentiation processes of the tumor cells. SCC production by CaSki cervical epidermoid carcinoma cells was stimulated by EGF. It seems likely that an autocrine system, in which EGF serves as the signal, may exist in cervical squamous carcinoma. 17beta-estradiol and L-triiodothyronine were found to upregulate EGF-R expression, proliferative potential and SCC production in the CaSki cervical carcinoma cells.     

Fabrication of a new substrate for atomic force microscopic observation of DNA molecules from an ultrasmooth sapphire plate

A new stable substrate applicable to the observation of DNA molecules by atomic force microscopy (AFM) was fabricated from a ultrasmooth sapphire (alpha-Al2O3 single crystal) plate. The atomically ultrasmooth sapphire as obtained by high-temperature annealing has hydrophobic surfaces and could not be used for the AFM observation of DNA. However, sapphire treated with Na3PO4 aqueous solution exhibited a hydrophilic character while maintaining a smooth surface structure. The surface of the wet-treated sapphire was found by x-ray photoelectron spectroscopy and AFM to be approximately 0.3 nm. The hydrophilic surface character of the ultrasmooth sapphire plate made it easy for DNA molecules to adhere to the plate. Circular molecules of the plasmid DNA could be imaged by AFM on the hydrophilic ultrasmooth sapphire plate.     

Studies on calcium antagonistic and alpha 1-adrenergic receptor blocking activities of monatepil maleate, its metabolites and their enantiomers

The calcium antagonistic and alpha 1-adrenergic receptor blocking activities of monatepil maleate (CAS 103377-41-9, (+/-)-N-(6,11-dihydrodibenzo [b, e] thiepin-11-yl) -4-(4-fluorophenyl)-1-piperazinebutanamide monomaleate, AJ-2615), a novel calcium antagonist, its metabolites and their enantiomers were studied in vitro. Monatepil maleate inhibited calcium-induced contractions of rat thoracic aorta (pA2 = 8.71) and l-phenylephrine-induced contractions of rabbit superior mesenteric artery (IC50 = 56.6 nmol/l). The calcium antagonistic activities of the metabolites of monatepil maleate (AJ-2615-sulfoxide A, AJ-2615-sulfoxide B and AJ-2615-sulfone) were 1/10 of that of monatepil maleate. However, their alpha 1-adrenergic receptor blocking activities were similar to or slightly more potent than that of monatepil maleate. The potencies of the calcium antagonistic activities of monatepil maleate and its enantiomers [(S)-AJ-2615 and (R)-AJ-2615] were in the order of (S)-AJ-2615 > monatepil maleate > (R)-AJ-2615 whereas no difference was observed among them in alpha 1-adrenergic receptor blocking activity. In calcium antagonistic and alpha 1-adrenergic receptor blocking activities, there was no difference between the enantiomers of monatepil maleate metabolites. In conclusion, there was a difference with several times in calcium antagonistic activity between the two enantiomers of monatepil maleate but not in their alpha 1-adrenergic receptor blocking activity.     

Distance metric learning for graph structured data

Machine Learning - Graphs are versatile tools for representing structured data. As a result, a variety of machine learning methods have been studied for graph data analysis. Although many such...     

Preparation of zirconia-toughened bioactive glass-ceramics

Bioactive glass-ceramics toughened by tetragonal zirconia polycrystal (TZP) were prepared by hot-pressing mixed powders of the MgO-CaO-P₂O₅-SiO₂ glass and TZP containing 20 to 80% alumina. The bending strength and the fracture toughness of the composite materials were improved compared with those of the material without TZP. These composites showed high bending strengths (400 to 500MPa) and high fracture toughness ( 2.8MPa m^1/2). The existence of a crack deflection mechanism was observed by scanning electron microscopy. After soaking in simulated physiological solution at 100 °C, no phase transformation from tetragonal to monoclinic of TZP in the composites and no degradation in bending strength occurred.     

Surface active N-acylglutamate: I. Preparation of long chain N-acylglutamic acid

Long chain N-acylglutamic acid was prepared in a high yield by a reaction of glutamic acid with fatty acid chloride in a mixed solvent of water and a water miscible organic solvent such as acetone, methyl ethyl ketone, dioxane, tetrahydrofuran,t-butyl alcohol or cyclohexanone. In this reaction the composition of the mixed solvent influenced the yield of N-acylated glutamic acid and the best yield was obtained when the reaction was carried out in the mixed solvent comprising 30–60% v/v of the organic solvent. Long chain N-acylaspartic acid was also obtained in a high yield by the same method. As the other method to obtain N-lauroyl-D L-glutamic acid, it was examined that N-acyl-α-aminoglutarodinitrile which was obtained by a reaction of α-aminoglutarodinitrile with fatty acid chloride was hydrolyzed with an aqueous alkaline solution. The salts of long chain N-acylglutamic acid are known as the surface active agents that react mildly on the human skin.     

Relationship between oxidative stability of vitamin E and production of fatty acids in oils during microwave heating

Effects of microwave heating on the oxidative stability ofd-tocopherols were studied in relation to the production of fatty acids in oils. During microwave heating, the stability of tocopherols decreased in the orderδ>β>γ>α. This order did not depend on the types of ethyl esters of fatty acids or oils present. But, the shorter the chainlength and the lower the degree of unsaturation of the fatty acid ethyl esters, the greater was the reduction in amount of individual tocopherols. A similar tendency was observed when tocopherol-stripped vegetable oils, with equimolar mixtures of tocopherols added, were treated under the same conditions. The reduction in tocopherols became greater with increasing levels of free fatty acids.     

Optimum combination of operating parameters in abrasive cut-off

For optimization of abrasive cut-off operation, wheel wear equation must be identified before the operation is optimized. The equation is obtained by using GMDH algorithm with successive determination of trends containing interactive terms. In the model equation factors of grinding fluid are taken into consideration in addition to the factors of wheel, work material, feed (table speed) and wheel speed. For the identification of the model wheel wear tests are performed under the experimental design treating the above-mentioned factors as independent variables. The grinding ratio (output in the model) can be predicted for combinations of various factors using the model. With the wheel wear equation and machining cost model, the optimum combination of wheel, fluid, feed and wheel speed can be selected for a given work material. The relationships between these variables and the costs are investigated.