Structure and properties of ultrafine silk fibers produced by <Emphasis Type="Italic">Theriodopteryx ephemeraeformis</Emphasis>

Theriodopteryx ephemeraeformis commonly known as bag worms produce ultrafine silk fibers that are remarkably different than the common domesticated (Bombyx mori) and wild (Saturniidae) silk fibers. Bag worms are considered as pests and commonly infect trees and shrubs. Although it has been known that the cocoons (bags) produced by bag worms are composed of silk, the structure and properties of the silk fibers in the bag worm cocoons have not been studied. In this research, the composition, morphology, physical structure, thermal stability, and tensile properties of silk fibers produced by bag worms were studied. Bag worm silk fibers have considerably different amino acid contents from those of the common silks. The physical structure of the bag worm silk fibers is also considerably different compared with B. mori and common wild silk fibers. Bag worm’s silk fibers have lower tensile strength (3.2 g/denier) and Young’s modulus (45 g/denier) but similar breaking elongation (15.3%) compared with B. mori silk. However, the tensile strength and Young’s modulus of bag worm fibers are similar to those of the common Saturniidae wild silk fibers. Bag worm silk fibers could be useful for some of the applications currently using the B. mori and wild silk fibers.     

Ultra-light-weight composites from bamboo strips and polypropylene web with exceptional flexural properties

Fine bamboo strips (BSs) have been laid on polypropylene (PP) web, stacked, and compression molded to prepare unconsolidated light-weight (0.312 g/cm³) composites. Composite properties are superior compared with jute-based composites and bamboo strips show potential to replace fiberglass or polyurethane in composites. Flexural strength, modulus, offset yield load, and Noise Reduction Coefficient (NR) of the BS–PP composites are 5.8×, 2.9×, 6.5×, and 1.4× higher, respectively, compared to jute–PP composites. Bamboo-based non-consolidated composites with excellent mechanical and sound absorption properties utilizing the methods described in this research provide an opportunity to manufacture functional composites with bio-based materials leading to reduction of environmental pollution and sustainable manufacturing.     

Effects of SiO<Subscript>2</Subscript> substitution on wettability of laser deposited Ca-P biocoating on Ti-6Al-4V

Silicon (Si) substitution in the crystal structure of calcium phosphate (CaP) ceramics has proved to generate materials with improved bioactivity than their stoichiometric counterpart. In light of this, in the current work, 100 wt% hydroxyapatite (HA) precursor and 25 wt% SiO₂-HA precursors were used to prepare bioactive coatings on Ti-6Al-4V substrates by a laser cladding technique. The effects of SiO₂ on phase constituents, crystallite size, surface roughness, and surface energy of the CaP coatings were studied. Furthermore, on the basis of these results, the effects and roles of SiO₂ substitution in HA were systematically discussed. X-ray diffraction analysis of the coated samples indicated the presence of various phases such as CaTiO₃, Ca₂SiO₄, Ca₃(PO₄)₂, TiO₂ (Anatase), and TiO₂ (Rutile). The addition of SiO₂ in the HA precursor resulted in the refinement of grain size. Confocal laser microscopy characterization of the surface morphology demonstrated an improved surface roughness for samples with 25 wt% SiO₂-HA precursor compared to the samples with 100 wt% HA precursor processed at 125 cm/min laser speed. The addition of SiO₂ in the HA precursor resulted in the highest surface energy, increased hydrophilicity, and improved biomineralization as compared to the control (untreated Ti-6Al-4V) and the sample with 100 wt% HA as precursor. The microstructural evolution observed using a scanning electron microscopy indicated that the addition of SiO₂ in the HA precursor resulted in the presence of reduced cracking across the cross-section of the bioceramic coating.     

CNT manipulation: inserting a carbonaceous dielectric layer beneath using electron beam induced deposition

Electron beam induced carbonaceous deposition has been carried out in the presence of water vapor at 0.4 torr pressure amidst residual hydrocarbons present in the SEM chamber. When performed at a CNT location on a Si substrate with low e beam energy (10 kV), the deposition was taking place beneath the CNT. While higher beam energy (25 kV) causing the deposition on the top surface of the CNT, in agreement with the earlier reports. The insertion of dielectric carbonaceous layer beneath the CNT allowed us to measure the I-V data along the length of the nanotube using CAFM.     

Modeling prostate anatomy from multiple view TRUS images for image-guided HIFU therapy

Current planning methods for transrectal high-intensity focused ultrasound treatment of prostate cancer rely on manually defining treatment regions in 15-20 sector transrectal ultrasound (TRUS) images of the prostate. Although effective, it is desirable to reduce user interaction time by identifying functionally related anatomic structures (segmenting), then automatically laying out treatment sites using these structures as a guide. Accordingly, a method has been developed to effectively generate solid three-dimensional (3-D) models of the prostate, urethra, and rectal wall from boundary trace data. Modeling the urethra and rectal wall are straightforward, but modeling the prostate is more difficult and has received much attention in the literature. New results presented here are aimed at overcoming many of the limitations of previous approaches to modeling the prostate while using boundary traces obtained via manual tracing in as few as 5 sector and 3 linear images. The results presented here are based on a new type of surface, the Fourier ellipsoid, and the use of sector and linear TRUS images. Tissue-specific 3-D models will ultimately permit finer control of energy deposition and more selective destruction of cancerous regions while sparing critical neighboring structures.     

Synthesis and structural refinement of polycrystalline ceramic powder Pr0.1Ca0.9TiO3

Perovskite structure-based ceramic precursors have a characteristic property of substitution in the ‘A’ site of the ABO₃ structure. This makes them a potential material for nuclear waste management in synthetic rock (Synroc) technology. In order to simulate the mechanism of rare earth fixation in perovskite, Pr_xCa_1−xTiO₃ (where x = 0.1) has been synthesized through ceramic route by taking calculated quantities of oxides of Ca, Ti and Pr as starting materials. The ceramic phase has been characterized by its powder diffraction pattern. The Rietveld analysis of the X-ray diffraction data has been carried out using GSAS software to achieve the convergence which gives the R_p = 5.74% and R_wp = 8.17%. The (h, k, l) values for different lattice planes have been calculated. The praseodymium substituted perovskite crystallizes in orthorhombic symmetry with space group: Pbnm, Z = 4. The unit cell parameters at room temperature are a = 5.39609(31) Å, b = 5.44869(30) Å and c = 7.6565(5) Å. The calculated and observed values of the corresponding intensities, 2θ and density of the polycrystalline powder show good agreement. GSAS-based calculation for bond distances TiO, CaO and bond angles OTiO, OCaO has been reported.     

Laser Induced Liquid Phase Reaction Synthesis Assisted Joining of Metal Matrix Composites

A Laser Induced Liquid Phase Reaction Synthesis Assisted Joining technique is employed for SiC-particulate/Al-alloy composite to produce joints. Joints in SiC/Al-alloy composite are produced by synthesis of suitable material product as a result of interaction between composite and Ti (or Ti-alloy) reactive filler material induced by laser energy in the joint region. Such reaction product minimizes or eliminates the formation of deleterious aluminum carbide phase in the joint region depending upon the type and nature of die interfacial reactive filler material and also the laser processing parameters. A laser beam is utilized to both synthesize the interfacial reactant mixture and to heat the base material adjacent to the joint region to minimize the thermal stresses. The technique along with suitable filler material, further can be extended to a variety of metal matrix composite systems including combinations of Gr/Al, B/Al, B₄C/Mg, Steel/Al, W/Al, Al₂ O₃ and Gr/Cu which are excellent for use in various automotive, aerospace and electronic applications. Preliminary observations describing the proof of concept of laser induced reaction joining of metal matrix composites are reported     

Ontologies for Specifying and Reconciling Contexts of Web Services

This paper presents an ontology-based approach for the specification (using as a definition language) and reconciliation (using as a mediation tool) of contexts of Web services. Web services are independent components that can be triggered and composed for the satisfaction of user needs (e.g., hotel booking). Because Web services originate from different providers, their composition faces the obstacle of the context heterogeneity featuring these Web services. An unawareness of this context heterogeneity during Web services composition and execution results in a lack of the quality and relevancy of information that permits tracking the composition, monitoring the execution, and handling exceptions.     

Shear band formation and cracking of a metallic glass irradiated with high energy laser pulses

A concentric deformation pattern, shear bands and cracks are produced in Fe₈₀B_14.8Si_3.5C₂ glass, irradiated with 12 msec duration ruby laser pulses, ranging in power densities between 10⁵ and 10⁷ W cm^–2. This deformation front propagates through a steep temperature gradient and a partially crystallized heat-affected zone, giving rise to variations of the macroscopic deformation mode as a function of radial distance from the centre of the laser spot. For the first time, a direct experimental mapping of crack tip plasticity, in the form of an elliptical shear band zone, has been recorded. A theoretical model, which predicts such a shear band zone at the crack tip, is used to discuss the elastic-plastic response of the metallic glass.