Proton Conductivity of SPEEK Membranes

Novel sulfonated poly(ether ether ketone) (PEEK) copolymers were prepared using a low-viscosity grade PEEK powder. The TGA studies indicated that SPEEK membranes with up to 75% DS have enough thermal stability. The highest conductivity of 2.176 × 10^?2 S cm^?1 has been observed at 100°C for SP96 (DS = 72%). Compared to Nafion-15, SP72 exhibits much higher conductivity at all the temperatures considered. The water sorption experiments indicated that the maximum water uptake was 3.92% for SP24 and it was 60% for SP120. It was observed that the increase in the water content in a membrane caused a decrease in the diffusion coefficient.     

Gate All Around Dopingless Nanotube TFET Biosensor with Si0.5Ge0.5 – Based Source

Silicon - Through this paper, we discuss how Tunnel Field Effect Transistors can be utilized for the detection of biomaterials hence acting as a biosensor. The device proposed is a 3-D Doping less...     

Performance Tuning and Reliability Analysis of the Electrostatically Configured Nanotube Tunnel FET with Impact of Interface Trap Charges

Silicon - This paper examines, an electrostatically configured Nano-Tube Tunnel Field-Effect Transistor (ED-NTTFET). During the fabrication process, different charges such as fixed charge, oxide...     

Design of Dual-Gate P-type IMOS Based Industrial Purpose Pressure Sensor

Silicon - In this treatise, we have proposed a Single Material Gate–Dual Gate Impact Ionization Metal Oxide Semiconductor (SMG DG-IMOS) based Pressure Sensor. The pressure sensor has the most...     

Micro- and Nano-Technology: A Critical Design Key in Advanced Thermoelectric Cooling Systems

Advanced thermoelectric (TE) cooling technologies are now receiving more research attention, to provide cooling in advanced vehicles and residential systems to assist in increasing overall system energy efficiency and reduce the impact of greenhouse gases from leakage by current R-134a systems. This work explores the systems-related impacts, barriers, and challenges of using micro-technology solutions integrated with advances in nano-scale thermoelectric materials in advanced TE cooling systems. Integrated system-level analyses that simultaneously account for thermal energy transport into and dissipation out of the TE device, environmental effects, temperature- dependent TE and thermo-physical properties, thermal losses, and thermal and electrical contact resistances are presented, to establish accurate optimum system designs using both p-type nanocrystalline-powder-based (NPB) Bi _x Sb_2−x Te₃/n-type Bi₂Te₃-Bi₂Se₃ TE systems and conventional p-type Bi₂Te₃-Sb₂Te₃/n-type Bi₂Te₃-Bi₂Se₃ TE systems. This work established the design trends and identified optimum design regimes and metrics for these types of systems that will minimize system mass, volume, and cost to maximize their commercialization potential in vehicular and residential applications. The relationships between important design metrics, such as coefficient of performance, specific cooling capacity, and cooling heat flux requirements, upper limits, and critical differences in these metrics in p-type NPB Bi _x Sb_2−x Te₃/ n-type Bi₂Te₃-Bi₂Se₃ TE systems and p-type Bi₂Te₃-Sb₂Te₃/n-type Bi₂Te₃-Bi₂Se₃ TE systems, are explored and quantified. Finally, the work discusses the critical role that micro-technologies and nano-technologies can play in enabling miniature TE cooling systems in advanced vehicle and residential applications and gives some key relevant examples. Pacific Northwest National Laboratory—operated for the U.S. Department of Energy by Battelle Memorial Institute under contract DE-AC05-76RLO1830.     

An Adaptive Prediction Strategy with Clustering in Wireless Sensor Network

In Wireless Sensor Network, sensed data reflects two types of correlations of physical attributes: spatial and temporal. In this paper, a scheme named, Adaptive Prediction Strategy with ClusTering (APSCT) is proposed. In APSCT, a data-driven clustering and grey prediction model is used to exploit both the correlations. APSCT minimizes the transmission of messages in the network. However, the use of prediction includes additional computation overhead. There is a trade-off between prediction accuracy and energy consumption in computation and communication in wireless networks. This paper also gives an approach to calculate the upper and lower bound of the prediction interval which is used to evaluate different confidence levels and provides an energy-efficient sensor environment. Simulation is carried out on real-world data collected by Intel Berkeley Lab and results are compared with existing approaches.

     

Achieving Narrow FWHM and High EQE Over 38% in Blue OLEDs Using Rigid Heteroatom-Based Deep Blue TADF Sensitized Host

Simultaneously obtaining high efficiency and deep blue emission in organic light emitting diodes (OLEDs) remains a challenge. To overcome the demands associated with deep blue thermally activated delayed fluorescence (TADF) emitters, two deep blue TADF materials namely, DBA–BFICz and DBA–BTICz, are designed and synthesized by incorporating oxygen-bridged boron (DBA) acceptor with heteroatoms, oxygen and sulphur-based donors, BFICz and BTICz, respectively. Both TADF materials show deep blue photoluminescence emissions below 450 nm by enhancing the optical band gap over 2.8 eV through deeper highest occupied molecular orbital (HOMO) level of heteroatom based donor moieties. At the same time, the photoluminescence quantum yields (PLQYs) of both TADF materials remain over 94%. The TADF device with DBA–BFICz as an emitter exhibits a good external quantum efficiency (EQE) of 33.2%. Since both new TADF materials show deep blue emissions and high efficiencies, hyperfluorescence (HF) OLED devices are fabricated using ν-DABNA as a fluorescence dopant. DBA–BFICz as a TADF sensitized host in HF–OLED reveals an outstanding EQE of 38.8% along with narrow full width at half maximum of 19 nm in the bottom emission pure blue OLEDs. This study provides an approach to develop deep blue TADF emitters for highly efficient OLEDs.     

Growth of nano-particles of Al2O3, AlN and iron oxide with different crystalline phases in a thermal plasma reactor

The paper presents the experimental results showing that the crystalline phase of the nano-particles, synthesized in a DC transferred arc thermal plasma reactor, critically depend on the operating pressure in the reaction zone. The paper reports about the changes in crystalline phases of three different compounds namely: aluminium oxide (Al₂O₃), aluminium nitride (AlN) and iron oxide (Fe_xO_y) synthesized at 760 Torr and 500 Torr of operating pressures. The major outcome of the present work is that the phases having higher defect densities are more probable to form at the sub-atmospheric operating pressures. The variations in the crystalline structures are discussed on the basis of the change in the temperature during the nucleation process, prevailing at the boundary of the plasma, on account of the ambient pressures. The as-synthesized nano-particles were examined by X-ray diffraction analysis and transmission electron microscopy. In addition, the confirmatory analysis of the crystalline phases of iron oxides was carried out with the help of Mössbauer spectroscopy.     

Functionally modified gelatin microspheres as a growth factor’s delivery system: development and characterization

One of the advances in biotechnology has been the development of the capability to produce large quantities of highly purified polypeptides and proteins. Unfortunately, the circulatory half-lives of many of these agents are short, usually of the order of minutes and the time required for a response in tissues is usually long compared to the half-life. Hence, there is always demand for polymeric systems which can deliver the proteins for prolonged period and also to protect the molecules from degradation. The present work was attempted to develop heparin-functionalized gelatin microspheres (HMS) to deliver heparin-binding growth factors particularly for wound-healing applications. The heparin conjugation was carried out using EDC/NHS coupling protocol. Heparin-binding EGF-like growth factor (HB-EGF) was loaded in HMS and its in vitro release behaviour in an environment with or without proteases was studied. The bioactivity of the HB-EGF released from the microspheres was assessed using NIH 3T3 mouse embryonic fibroblast culture. The extent of heparin modification was found to be 1.97 μmol/g of HMS and demonstrated significant protection against enzymatic degradation and sustained release of HB-EGF for more than 10 days. The bioactivity of HB-EGF released from the HMS was retained during the observed release period. The HMS was also found to be non-toxic as determined by calcein AM fluorescent staining. The overall study suggests that the HMS could be used as a growth factor’s delivery component in tissue engineering scaffolds particularly for wound-healing applications.