Nonlinear Simulation of a Cyclotron Autoresonance Maser (CARM) Operating in a Transverse Magnetic Mode

In the gyrotron operation, the transverse-magnetic (TM) mode is excluded because the TM mode instability vanishes when the vacuum waveguide mode and the beam mode are at grazing incidence. However, situation changes in a cyclotron autoresonance maser (CARM) interaction. In this paper nonlinear formulation of a TM-mode CARM is derived, and detailed simulations are presented for the TM_1,1-mode CARM. Simulation results show that a TM_1,1-mode CARM can reach high power of megawatts and ultrahigh gain of more than 70 dB, as a TE_1,1-mode gyrotron traveling wave tube (gyro-TWT) and TE_1,1-mode CARM did in the reported experiments.     

Synchronous multicast and broadcast service in multi-rate IEEE 802.16j WiMAX relay network

IEEE 802.16j Mobile Multihop Relay Standard defines multi-hop relay operation in a WiMAX system. It uses a novel synchronous multicast and broadcast transmission mechanism to achieve macro diversity. With the newly introduced synchronous delivery constraint, the multicast data delivery algorithm should be designed differently to enhance system performance. This paper provides Multi-Rate Selection Algorithm (MRSA) for multicast and broadcast (MBS) data delivery. It could reduce the data distribution delay from the BS to all the RSs. Besides, we also propose the path selection algorithm to further improve the effectiveness of MRSA. Our simulation results show that using MRSA with our shortest-path path selection algorithm, the delay for data delivery in 802.16j MBS system could be greatly reduced. The proposed scheme could achieve the performance closed to the optimal solutions. To the authors’ best knowledge, this is the first research work to investigate the IEEE 802.16j multicast and broadcast problem.     

A Simplified Internet Routing Architecture

This paper studies the effect of disaggregation on the size of the routing table in the Internet’s Default Free Zone (DFZ). Current practises for traffic balancing and protection against prefix hijacking in the Internet are based in disaggregating prefixes that cause an increase in size of the Internet’s core routing table. I propose an algorithm to assess their effect on the table size of these techniques. This algorithm is applied on routing tables collected by the RIPE’s Routing Repository between January 2001 and February 2011. The results show that before 2010, the IPv4 addressing space was gradually getting more fragmented. This trend is slowing down since the beginning of 2010, possibly as the result of the economic downturn. In the second part of this paper, I propose an alternative architecture that allows local Traffic Engineering configurations but keeps their effects from spreading over the Internet and outline an implementation for this architecture on a Linux platform.     

An Autonomic QoS-centric Architecture for Integrated Heterogeneous Wireless Networks

In this paper the problem of seamless mobility and proficient joint radio resource management over an all-IP internetworked wireless heterogeneous environment is addressed. Nodes’ autonomicity is envisioned as the enabler to devise a Quality of Service (QoS) aware architecture for supporting a variety of services, founded on a common utility based framework that provides enhanced flexibility in reflecting different access networks’ type of resources and diverse QoS prerequisites, under a unified QoS-aware resource allocation optimization problem. This allows a more in-depth intrinsic wireless network convergence, beyond All-IP, driven by QoS-oriented resource management. This vision is demonstrated and instantiated for integrated WLAN and cellular (both CDMA and OFDMA) networks, providing a viable path towards the evolution and realization of the future wireless networking paradigm. Initial numerical results demonstrate the effectiveness of the proposed architecture and reveal the benefits of such a service oriented paradigm against other existing access oriented autonomic designs.     

Efficient Color-theory-based Dynamic Localization for Mobile Wireless Sensor Networks

Location information is critical to mobile wireless sensor networks (WSN) applications. With the help of location information, for example, routing can be performed more efficiently. In this paper, we propose a novel localization approach, Color-theory based Dynamic Localization (CDL), which is based on color theory to exploit localization in mobile WSNs. CDL makes use of the broadcast information, such as locations and RGB values, from all anchors (a small portion of nodes with GPS receivers attached), to help the server to create a location database and assist each sensor node to compute its RGB value. Then, the RGB values of all sensor nodes are sent to the server for localization of the sensor nodes. A unique feature of our color-theory based mechanism is that it can use one color to represent the distances of a sensor node to all anchors. Since CDL is easy to implement and is a centralized approach, it is very suitable for applications that need a centralized server to collect user (sensor) data and monitor user activities, such as community health-care systems and hospital monitoring systems. Evaluation results have shown that for mobile WSNs, the location accuracy of CDL (E-CDL, an enhanced version of CDL) is 40–50% (75–80%) better than that of MCL (Hu, L., & Evans, D. (2004). Localization for mobile sensor networks. In Proceedings of the 10th annual international conference on mobile computing and networking, pp. 45–57). In addition, we have implemented and validated our E-CDL algorithm on the MICAz Mote Developer’s Kit.     

Effect of Copper on the Carrier Lifetime in Black Silicon

Black silicon is produced by laser annealing of a-Si:H films. During annealing, silicon microstructures are formed on the surface. We use time-resolved terahertz spectroscopy to study the photoconductivity dynamics in black silicon. We find that when a copper film is deposited on top of the a-Si:H layer prior to laser annealing, the carrier lifetime of black silicon is significantly reduced.     

Introduction to the special issue on IEEE NEWCAS 2017

A contactless detector is presented for evaluating hand tremors caused by exercise-induced fatigue and early Parkinson’s disease. The device consists of a spiral coil, a microcontroller, and an inductive sensor circuitry. Theory shows that the resonant frequency of the circuitry increases when the distance between the hand and the spiral coil decreases, thus small variations of distance from tremor can be detected from the changes of resonant frequencies. A mechanical hand was built for experiments to simulate human hand tremors with repeatability at a fixed frequency. The magnitudes and frequencies of the tremors in the mechanical hand were quantitatively identified using the inductive sensor. Hence, feasibility and accuracy of the contactless hand tremor detector were determined. A triaxial accelerometer was used for comparison. By comparing spectral distributions and magnitudes of the tremors, the inductive sensor performed better than the accelerometer. The detector was applied to evaluate actual hand tremors of three subjects who had undergone exercise to induce tremors. The tremor waveform amplitudes of the subjects were quantitatively analyzed by the standard deviations method. The increased signal energies of exercise-induced tremor within 8–12 Hz were confirmed. Then, a subject with early Parkinson’s disease was evaluated by the proposed hand tremor detector. The tremor magnitudes and frequencies of the patient hand were quantitatively identified within in 4–7 Hz. Therefore, the new contactless hand tremor detector can be developed as a clinical instrument for monitoring the fatigue symptoms of post-exercise and diagnosing the early Parkinson’s disease.     

Dual-output switched-capacitor DC–DC converter with pseudo-three-phase swap-and-cross control and amplitude modulation mechanism

This paper presents an inductorless dual-output switched-capacitor DC–DC converter employing pseudo-three-phase swap-and-cross control (PTPSCC) and an amplitude modulation mechanism (AMM). The AMM circuit scales the amplitudes of the driving signals for the switches according to the loading conditions in order to minimize switching losses. To reduce output ripples, average charge distribution, and improve regulation, the PTPSCC circuit continuously switches power transistors to deliver enough charge to the outputs by keeping at least one flying capacitor connected to each output. The switched capacitor DC–DC converter was implemented in a standard 0.18-μm 3.3-V CMOS process. Measurements were used to verify that the proposed converter provides dual independently regulated output voltages without cross regulation. The two outputs were regulated at 2.5 and 0.8 V with input ranges of 1.7–2 V. The maximum output loading was 100 mA for both outputs. A power efficiency of 90.5% was achieved at a maximum total output power of 330 mW with a switching frequency of 500 kHz, and a maximum power efficiency of 92.1% was achieved for a total output power of 210 mW. The maximal peak-to-peak output ripple voltages for the two outputs at 100 mA load currents were suppressed to below 26 and 20 mV, respectively.     

A CMOS multi-gain transconductance amplifier and its applications

Transconductance amplifier (g_m) based circuits are attractive due to their inherent programmability features. Single output g_m’s are often replaced by multi-output g_m’s to reduce the number of active devices for a given application. However, this usually results in losing the circuit programmability features. This work shows that this problem can be circumvented through adopting a new programmable multi-gain g_m. The advantages of the proposed multi-gain g_m are demonstrated using two filter design examples. They show that the proposed multi-gain g_m reduces the number of active devices by two-third compared with their single output g_m based counterparts while maintaining their versatile programmability characteristics. Experimental results obtained from a 0.18 μm CMOS process for one of the applications are provided.