Deformation and friction of MoS2 particles in liquid suspensions used to lubricate sliding contact

Tribology of a well known solid lubricant molybdenum disulphide is studied here in water and oil medium, over a large range of contact dimensions. Lateral force microscopy is used to identify the deformation modes; intra-crystalline slip, plastic grooving, fragmentation and fracture, of single particles. The medium and agglomeration were found to dictate the deformation mode. Steel on steel tribology lubricated by suspensions of these particles in liquid media was conducted over a range of contact pressure and sliding velocity. A scrutiny of the frictional data with the aid of Raman spectroscopy to identify the transfer film, suggested that the particle size, as it is at contact, is an important tribological parameter. Ultrasonication of the suspension and dispersion of the particle by surfactants were used to control the apriori particle size fed into the suspension. Correspondence of friction data of the gently sonicated suspension with that of the ultrasonicated suspension with dispersants indicated the importance of liquid ingestion by these particles as it controls their mode of deformation and consequent tribology.     

Investigation of wide range magnetoresistance in La0.7Ca0.3−xAgxMnO3 (0 ≤ x ≤ 0.2) system

We synthesized magnetoresistive compounds with nominal compositions La_0.7Ca_0.3?xAg_xMnO₃ (0 ≤ x ≤ 0.2) by solid state reaction method with different sintering temperatures. All the samples exhibited orthorhombic structure with variable lattice parameters. The metal-insulator transitions were observed below room temperature in most of the samples. Depending upon the composition and sintering temperature, the samples showed very high magnetoresistance in narrow range or significant magnetoresistance over wide range of temperature. The ac susceptibility measurement revealed compositional dependence of Curie temperature.     

Magnetohydrodynamic Slip Flow and Heat Transfer in a Porous Medium over a Stretching Cylinder: Homotopy Analysis Method

This study considers magnetohydrodynamic flow and heat transfer outside a hollow stretching cylinder immersed in a fluid saturated porous medium of sparse distribution of particles with high permeability. Partial slip boundary conditions for the velocity and temperature fields are assumed at the stretching surface of the cylinder. Using similarity transformations, the nonlinear partial differential equations governing the flow and heat transfer are converted into nonlinear ordinary differential equations which are then solved by the homotopy analysis method. The effects of the pertinent parameters on the velocity and temperature profiles are investigated and discussed graphically.     

Transdermal and Buccal Delivery of Methylxanthines Through Human Tissue In Vitro

ABSTRACT

We examined the in vitro permeation of central nervous stimulants—caffeine, theophylline, and theobromine across human skin with the aid of six chemical enhancers. It was found that oleic acid was the most potent enhancer for all three methylxanthines. Further optimization studies with different solvents showed that caffeine transport could be enhanced to give flux values up to 585 μg/cm².hr^?1. Theobromine and theophylline delivery rates proved insufficient. An additional study involving a buccal tissue equivalent showed that this membrane was more permeable than skin for all model actives tested and would offer an alternate way of delivery.     

Quercetin alleviates activities of intestinal and renal disaccharidases in streptozotocin-induced diabetic rats

Specific activities of both intestinal and renal dissacharidases, such as sucrase, maltase, and lactase, were altered in diabetic rats. Our study was focused to evaluate the effect of feeding quercetin - a bioflavanoid on intestinal and renal dissacharidases in streptozotocin-induced diabetic rats. The rats were fed with 0.1% quercetin in diet. A reduction in intestinal maltase and sucrase, activities in quercetin-fed diabetic rats was observed in contrast to the increased activities in the starch-fed diabetic rats. A significant amelioration in renal dissacharidase activities in quercetin-fed diabetic rats was observed when compared to decreased activity in starch-fed diabetic rats.     

Statistically matched wavelet-based method for detection of power quality events

This article presents a new technique for the detection of power quality (PQ) events by using statistically matched wavelet. The statistically matched wavelet is designed based on the characteristics of the PQ event using the concept of fractional Brownian motion. The proposed technique is compared with Daubechies wavelet to show its superiority in the detection of PQ events. To classify the detected events, an iterative closest point algorithm is used which classifies the detected event even in the presence of outlier points and Gaussian noise. The method is applied to classify the various PQ events like transient, sag, swell and harmonics and the results are simulated using MATLAB version 7.3.     

Maximum Lifetime Routing Problem in Duty-Cycling Sensor Networks

In order to extend the lifetime of a wireless sensor network, the energy consumption of individual sensor nodes need to be minimized. This can be achieved by minimizing the idle listening time with duty cycling mechanism and/or minimizing the number of communications per node. The nodes will have different relay loads for different routing strategies: therefore, the routing problem is important factor in minimization of the number of communications per node. In this paper, we investigate achievable network lifetime with a routing mechanism on top of an existing duty-cycling scheme. To this end, we formulated the routing problem for duty-cycling sensor network as a linear programming problem with the objective of maximizing the network lifetime. Using the developed linear programming formulation, we investigate the relationship between network lifetime and duty-cycling parameter for different data generation rates and determine the minimum duty-cycling parameter that meets the application requirements. To the best of our knowledge, this is the first mathematical programming formulation which addresses the maximum lifetime routing problem in duty-cycling sensor network. In order to illustrate the application of the analytical model, we solved the problem for different parameter settings.     

Reliable and Secure Cooperative Communication for Wireless Sensor Networks Making Use of Cooperative Jamming with Physical Layer Security

Interference is generally considered as the redundant and unwanted occurrence in wireless communication. This research work proposes a novel cooperative jamming mechanism for scalable networks like wireless sensor networks which makes use of friendly interference to confuse the eavesdropper and increase its uncertainty about the source message. The communication link is built with the help of Information theoretic source and channel coding mechanisms. The whole idea is to make use of normally inactive relay nodes in the selective Decode and Forward cooperative communication and let them work as cooperative jamming sources to increase the equivocation of the eavesdropper. In this work, eavesdropper’s equivocation is compared with the main channel in terms of mutual information and secrecy capacity.     

Prospects of biodiesel production from microalgae in India

Energy is essential and vital for development, and the global economy literally runs on energy. The use of fossil fuels as energy is now widely accepted as unsustainable due to depleting resources and also due to the accumulation of greenhouse gases in the environment. Renewable and carbon neutral biodiesel are necessary for environmental and economic sustainability. Biodiesel demand is constantly increasing as the reservoir of fossil fuel are depleting. Unfortunately biodiesel produced from oil crop, waste cooking oil and animal fats are not able to replace fossil fuel. The viability of the first generation biofuels production is however questionable because of the conflict with food supply. Production of biodiesel using microalgae biomass appears to be a viable alternative. The oil productivity of many microalgae exceeds the best producing oil crops. Microalgae are photosynthetic microorganisms which convert sunlight, water and CO₂ to sugars, from which macromolecules, such as lipids and triacylglycerols (TAGs) can be obtained. These TAGs are the promising and sustainable feedstock for biodiesel production. Microalgal biorefinery approach can be used to reduce the cost of making microalgal biodiesel. Microalgal-based carbon sequestration technologies cover the cost of carbon capture and sequestration. The present paper is an attempt to review the potential of microalgal biodiesel in comparison to the agricultural crops and its prospects in India.     

Effect of glycidyl methacrylate on the physical properties of wood–polymer composites

Chemical modification of pinewood was carried out by impregnating the wood with styrene as the impregnating monomer and in combination with a crosslinking monomer glycidyl methacrylate (GMA). Polymerization was carried out by catalyst heat treatment. Dimensional stability in terms of antiswell efficiency was determined and improved on treatment with polymer. Water uptake percentage was also improved for styrene‐GMA treated wood samples over styrene treated or untreated wood samples. Mechanical properties such as bending strength measured in terms of modulus of elasticity and modulus of rupture of polymer‐treated samples showed an improvement over untreated ones. Treatment also resulted an improvement in compressive strengths. Thermal properties of the wood samples were evaluated by thermogravimetric analyzer and differential scanning calorimeter. Biodegradability of the treated and untreated wood samples was determined and improvement was obtained on treatment. As a whole, styrene‐GMA treated wood samples showed more improvement over untreated or styrene‐treated samples. POLYM. COMPOS., 28:1–5, 2007. © 2007 Society of Plastics Engineers