Microstructure and thermal behavior of Sn-Zn-Ag solders

The microstructure and thermal behavior of the Sn-Zn-Ag solder were investigated for 8.73–9% Zn and 0–3.0% Ag. The scanning electron microscopy (SEM) analysis shows the Ag-Zn compound when the solder contains 0.1% Ag. X-ray diffraction (XRD) analysis results indicate that Ag₅Zn₈ and AgZn₃ become prominent when the Ag content is 0.3% and above. Meanwhile, the Zn-rich phase is refined, and the Zn orientations gradually diminish upon increase in Ag content. The morphology of the Ag-Zn compound varies from nodular to dendrite structure when the Ag content increases. The growth of the Ag-Zn compounds is accompanied by the diminishing of the eutectic structure of the Sn-9Zn solder. Differential scanning calorimetry (DSC) investigation reveals that the solidus temperature of these solders exists at around 198°C. A single, sharp exothermic peak was found for the solders with Ag content less than 0.5%. Liquidus temperatures were identified with the DSC analysis to vary from 206°C to 215°C when the Ag content ranges from 1.0% to 3.0%     

Quantification of free ketene acetals and determination of cure kinetics of poly(ortho ester)s by a facile deuterium labeling method

A facile method was developed to quantify unreacted ketene acetals during polymerization of poly(ortho ester)s. The method was based on isotopic (deuterium) labeling of the unreacted ketene acetal groups arising from the diketene acetal monomer, 3,9-diethylidene-2,4,8,10-tetraoxaspiro[5,5]undecane (DETOSU). In deuterium oxide, free ketene acetals are hydrolyzed to an α-deuterated ester; ortho ester bonds are hydrolyzed to the nondeuterated analog. The relative abundance of the deuterated ester side chain can be quantified by gas chromatography-mass spectrometry (GC-MS). In the current method, aliquots of a diketene acetal/polyol(s) reaction mixture were dissolved (crosslinked polymers swollen) in methylene chloride and excess D₂O. The diketene acetal/polyol(s) reaction mixture was hydrolyzed under mildly acidic conditions to yield pentaerythritol dipropionate (PDP; hydrolysis product of DETOSU). PDP was extracted into an organic phase, silylated, and analyzed by GC-MS. Fragments corresponding to the C₂H₅C?O+ ion (57 a.m.u.) and C₂H₄DC?O+ ion (58 a. m. u.) were monitored and the quantity of free ketene acetal groups were calculated from the peak areas of the chromatograms. The precision of the method was ±0.1%. The accuracy, as compared to a parallel ¹H-NMR study, was within 5%. This method permits determination of the cure end-point of a poly(ortho ester) polymerization reaction to within ±0.25%. The curing kinetics agreed well with DSC branching/crosslinking measurements. © 1994 John Wiley & Sons, Inc.     

Synthesis of polyurethane resins and its improvement on dimensional stability and finishing performances of medium‐ and small‐diameter softwoods

This study analyzed the effects of polyurethane (PU) resin treatments on surface homogeneity, dimensional stability, and finishing performances of medium‐ and small‐diameter softwoods produced in Taiwan. Two‐pack PU resins were prepared by combing short castor oil‐modified alkyd resin serving as a polyol with polymeric 4,4′‐diphenymethane diisocyanate (PMDI) serving as a hardener, by the molar ratio of NCO/OH+COOH of 1.2. Four types of short oil‐modified alkyd resins with different polyhydric alcohols (glycerin and pentaerythritol) and polybasic acids (phthalic anhydride and isophthalic acid) were synthesized. Three kinds of medium‐ and small‐diameter softwoods, including China fir, Taiwanina, and Japanese fir with a diameter of 10–15 cm were obtained from Hui‐Sun Forest Station, Taiwan. The wood coating of nitrocellulose (NC) lacquer including sanding sealer and top clear was used. Results show that the surface hardness, homogeneity, moisture excluding efficiency, and antiswelling efficiency of woods were enhanced by PU resin treatments. Among all the PU resins, the isophthalic acid and pentaerythritol‐containing PU resin (IPA‐P‐MDI) achieved the best improved efficiency on dimensional stability of woods. Results of two types of finishing procedure, i.e. NC lacquer sanding sealer plus top clear and top clear only, applied onto the PU‐treated woods revealed that the hardness, adhesion, and durability of NC lacquer films on the PU‐treated wood were superior to those of untreated one, especially for top clear finishing alone. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water bamboo husk reinforced poly(lactic acid) green composites

The water bamboo husk is one of major agricultural wastes in Taiwan. In this study, the powder obtained from the water bamboo husk was added to poly(lactic acid) (PLA) to form novel reinforced biodegradable composites. Morphologies, mechanical properties, and heat resistance of these water bamboo powder reinforced composites were investigated. The results indicate that the char yields were increased as plant powder was incorporated to PLA. In addition, the mechanical properties were also enhanced due to the addition of powders. The increments of storage moduli of PLA were about 50–200%. Moreover, the increments of loss moduli of PLA were about 70–200%. On the other hand, the T_g of PLA was slightly decreased by the addition of powder, and this may improve the brittle characteristics of PLA. Furthermore, this type of reinforced PLA would be more environmental friendly than the artificial additive‐reinforced one. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Workflow technology-based monitoring and control for business process and project management

In this paper the application of workflow technology to monitor, control and coordinate business processes and projects is proposed. The conceptual characteristics of processes and projects as well as their management needs in the functions of planning, execution, monitoring and control are compared. The general design of the proposed system is then developed, with an application example. The proposed monitoring and control system provides proactive tracking of the flow of work and information, and of the utilization and commitment of resources. The design supports hierarchical management of the project and/or business process, allowing concerned persons to visualize and to utilize it in different levels of abstraction, as necessary. The application of workflow technology also provides additional benefits in facilitating communication, documentation and re-utilization.     

Experimental determination of electron and hole mobilities in MOSaccumulation layers

This letter presents for the first time, the experimentally determined majority carrier mobilities in the accumulation layer of a MOSFET for both p-type and n-type channel doping for a wide range of doping concentrations. The measured carrier mobility is observed to follow a universal behavior at high transverse fields, similar to that observed for minority carriers in MOS inversion layers. At the higher doping levels, the effective mobility for majority carriers at low to moderate transverse fields is found to be very close to the bulk mobility. This is believed to be due to carrier screening of the ionized impurity scattering which dominates at the higher doping concentrations     

Roll‐to‐roll UV embossing process applied for light bar‐based sub‐wavelength gratings for backlight

This study proposes a roll‐to‐roll process‐based sub‐wavelength grating, which is attached on a light bar to turn the side‐lit red/green/blue (620, 520, and 450 nm) incident rays into a uniformly and normally output white light with high illuminance from the light bar's surface. On the basis of the rigorous coupling wave analysis, the relationship between the first‐order transmission/reflection efficiency and the pitch of the gratings with different shapes was analyzed. The optimal design can effectively reduce the coupling length and enhance the white color balance for display applications.     

Ontology-based similarity for product information retrieval

Product development of today is becoming increasingly knowledge intensive. Specifically, design teams face considerable challenges in making effective use of increasing amounts of information. In order to support product information retrieval and reuse, one approach is to use case-based reasoning (CBR) in which problems are solved “by using or adapting solutions to old problems.” In CBR, a case includes both a representation of the problem and a solution to that problem. Case-based reasoning uses similarity measures to identify cases which are more relevant to the problem to be solved. However, most non-numeric similarity measures are based on syntactic grounds, which often fail to produce good matches when confronted with the meaning associated to the words they compare. To overcome this limitation, ontologies can be used to produce similarity measures that are based on semantics. This paper presents an ontology-based approach that can determine the similarity between two classes using feature-based similarity measures that replace features with attributes. The proposed approach is evaluated against other existing similarities. Finally, the effectiveness of the proposed approach is illustrated with a case study on product–service–system design problems.