Fabrication of interpenetrating polymer network to enhance the biological activity of synthetic hydrogels

A three dimensional porous hydrogel with suitable biological and mechanical properties are required for bone tissue engineering. Hydrogels of poly(lactic-ethylene oxide fumarate) (PLEOF), crosslinked with poly(ethylene glycol)-diacrylate (PEG-da) have desirable mechanical properties, however, their application for bone regeneration is limited due to the lack of cell motif sites within their structure. The aim of this study was to incorporate a naturally derived polymer such as gelatin into PLEOF hydrogels to promote their biological properties. Interpenetrating polymer network (IPN) was used as an efficient technique to acquire uniform mixture of these two polymers. Additionally gas foaming agents were used to create pores with average diameter of 250 μm in these IPN hydrogels. The concentrations of PEG-da and gelatin were optimized to tune the mechanical strength and degradation properties of these hydrogels. A compression modulus of 500 kPa was achieved for hydrogel fabricated with 400 mg/ml PLEOF, 200 mg/ml PEG-da and 150 mg/ml gelatin. The addition of gelatin to PLEOF elevated the compression modulus by two-fold and decreased the energy loss by 40%. The result of protein analysis demonstrated that IPN substantially enhanced the retention of physically crosslinked gelatin in the 3D structure of hydrogel. More than 50% of gelatin was retained in IPN hydrogel after two weeks of incubation in simulated physiological environment. Preserving gelatin in the hydrogel structure provides cell motif sites for a longer period of time, which is desirable for uniform cell proliferation. In vitro studies showed that primary human osteoblast cells adhered and proliferated in PLEOF-gelatin hydrogel. These results demonstrated the potential of using this IPN hydrogel for bone tissue engineering.     

Characterization of Thermal Barrier Coatings Produced by Various Thermal Spray Techniques Using Solid Powder,Suspension, and Solution Precursor Feedstock Material

Use of a liquid feedstock in thermal spraying (an alternative to the conventional solid powder feedstock) is receiving an increasing level of interest due to its capability to produce the advanced submicrometer/nanostructured coatings. Suspension plasma spraying (SPS) and solution precursor plasma spraying (SPPS) are those advanced thermal spraying techniques which help to feed this liquid feedstock. These techniques have shown to produce better performance thermal barrier coatings (TBCs) than conventional thermal spraying. In this work, a comparative study was performed between SPS‐ and SPPS‐sprayed TBCs which then were also compared with the conventional atmospheric plasma‐sprayed (APS) TBCs. Experimental characterization included SEM, porosity analysis using weight difference by water infiltration, thermal conductivity measurements using laser flash analysis, and lifetime assessment using thermo‐cyclic fatigue test. It was concluded that SPS coatings can produce a microstructure with columnar type features (intermediary between the columnar and vertically cracked microstructure), whereas SPPS can produce vertically cracked microstructure. It was also shown that SPS coatings with particle size in suspension (D₅₀) <3 μm were highly porous with lower thermal conductivity than SPPS and APS coatings. Furthermore, SPS coatings have also shown a relatively better thermal cyclic fatigue lifetime than SPPS.     

Structural Variations in Articular Cartilage Matrix Are Associated with Early-Onset Osteoarthritis in the Spondyloepiphyseal Dysplasia Congenita (Sedc) Mouse

Heterozgyous spondyloepiphyseal dysplasia congenita (sedc/+) mice expressing a missense mutation in col2a1 exhibit a normal skeletal morphology but early-onset osteoarthritis (OA). We have recently examined knee articular cartilage obtained from homozygous (sedc/sedc) mice, which express a Stickler-like phenotype including dwarfism. We examined sedc/sedc mice at various levels to better understand the mechanistic process resulting in OA. Mutant sedc/sedc, and control (+/+) cartilages were compared at two, six and nine months of age. Tissues were fixed, decalcified, processed to paraffin sections, and stained with hematoxylin/eosin and safranin O/fast green. Samples were analyzed under the light microscope and the modified Mankin and OARSI scoring system was used to quantify the OA-like changes. Knees were stained with 1C10 antibody to detect the presence and distribution of type II collagen. Electron microscopy was used to study chondrocyte morphology and collagen fibril diameter. Compared with controls, mutant articular cartilage displayed decreased fibril diameter concomitant with increases in size of the pericellular space, Mankin and OARSI scores, cartilage thickness, chondrocyte clustering, proteoglycan staining and horizontal fissuring. In conclusion, homozygous sedc mice are subject to early-onset knee OA. We conclude that collagen in the mutant’s articular cartilage (both heterozygote and homozygote) fails to provide the normal meshwork required for matrix integrity and overall cartilage stability.     

Direct Synthesis of Partially Modified 2′‐O‐Pivaloyloxymethyl RNAs by a Base‐Labile Protecting Group Strategy and their Potential for Prodrug‐Based Gene‐Silencing Applications

An original and straightforward synthesis of partially modified 2′‐O‐pivaloyloxymethyl‐substituted (PivOM‐substituted) oligoribonucleotides has been achieved. The aim of this 2′‐enzymolabile modification was to enhance nuclease stability of RNA and transmembrane transport. To make these modified RNAs easily available we developed a base‐labile protecting group strategy with standard protections for nucleobases (acyl) and phosphates (cyanoethyl), a Q‐linker and two different acetalester protection groups for 2′‐OH: propionyloxymethyl (PrOM) and PivOM. Interestingly, orthogonal deprotection conditions based on anhydrous butylamine in THF were found to remove propionyloxymethyl groups selectively, while preserving PivOM groups. Duplex stability, circular dichroism studies and nuclease resistance, as well as the ability to inhibit gene expression of modified 2′‐O‐PivOM RNA, were evaluated.     

Sphingosine 1-Phosphate Receptor 5 (S1P5) Knockout Ameliorates Adenine-Induced Nephropathy

S1P and its receptors have been reported to play important roles in the development of renal fibrosis. Although S1P₅ has barely been investigated so far, there are indications that it can influence inflammatory and fibrotic processes. Here, we report the role of S1P₅ in renal inflammation and fibrosis. Male S1P₅ knockout mice and wild-type mice on a C57BL/6J background were fed with an adenine-rich diet for 7 days or 14 days to induce tubulointerstitial fibrosis. The kidneys of untreated mice served as respective controls. Kidney damage, fibrosis, and inflammation in kidney tissues were analyzed by real-time PCR, Western blot, and histological staining. Renal function was assessed by plasma creatinine ELISA. The S1P₅ knockout mice had better renal function and showed less kidney damage, less proinflammatory cytokine release, and less fibrosis after 7 days and 14 days of an adenine-rich diet compared to wild-type mice. S1P₅ knockout ameliorates tubular damage and tubulointerstitial fibrosis in a model of adenine-induced nephropathy in mice. Thus, targeting S1P₅ might be a promising goal for the pharmacological treatment of kidney diseases.     

Role of Grafting on Particle and Film Morphology and Film Properties of Zero VOC Polyurethane/Poly(meth)acrylate Hybrid Dispersions

Hybrid waterborne dispersions of polyurethane (PU)/poly(meth)acrylic are widely applied in coating and adhesive products, as well as in many other applications. The synergetic performance of the two component polymers is highly dependent on the ability to control the PU and (meth)acrylic network structure. In this work, the effect of grafting and the impact of macromolecular architecture on the particle and film morphology as well as on the properties of PU/(meth)acrylic hybrid films is investigated. It is shown that with grafting, the absolute molar mass distribution (MMD) is shifted toward higher values as the low molar mass PU chains become incorporated in the (meth)acrylic polymer network. Furthermore, by using different types of functional monomers, the nature of the MMD can be altered. Using transmission electron microscopy (TEM) analysis, it is demonstrated that more homogeneous particle and film morphologies are obtained in the case of grafted hybrids. Finally, the impact of network structure on tensile strength is outlined highlighting that grafted polymer films have higher Young's modulus and strain hardening than the non‐grafted ones.     

Chemical synthesis, expression and product assessment of a gene coding for biologically active human tumour necrosis factor {alpha}

A gene encoding human tumour necrosis factor (TNF-) has beenchemically synthesized, cloned and expressed to yield a biologicallyactive protein in Escherichia coli. The 480-bp gene was assembledby enzymic ligation of 32 oligonucleotides, cloned directlyinto M13mp18 for sequence verification and expressed in thebroad host range high-level expression vector pMMB66EHST. Expressedrecombinant TNF- was shown to have the correct molecular weight,processed N-terminal sequence, antibody cross-reactivity andtumour cell killing activity. The expression product of thesynthetic gene has been purified to homogeneity by a two-stepion-exchange procedure and the purified material shown to beactive.     

Effect of betaine supplementation on power performance and fatigue

Background  

The purpose of this study was to examine the efficacy of 15 days of betaine supplementation on muscle endurance, power performance and rate of fatigue in active college-aged men.     

Modeling genetic and environmental influences in the etiology of conduct disorder: A study of 2,682 adult twin pairs.

The etiology of conduct disorder (CD) was examined retrospectively in a sample of 2,682 male, female, and unlike-sex adult twin pairs from the community-based Australian Twin Register. Model-fitting analyses indicated a substantial genetic influence on risk for CD, accounting for 71% of the variance (95% confidence interval [CI]?=?32–79%). There was not a statistically significant effect of the shared environment in the best-fitting model of CD, but a modest effect of the shared environment on the risk for CD could not be rejected (95% CI?=?0-32%). The magnitude of genetic and environmental influences for CD liability did not vary significantly for boys and girls, and the specific genetic and environmental mechanisms important for the development of CD appeared to be largely the same for both sexes. The fit of a multiple-threshold model raises the possibility that CD may not necessarily be a discrete entity but rather an extreme of the normal variation in conduct-disordered behavior found in the general population. (PsycINFO Database Record (c) 2010 APA, all rights reserved)