Characterization of antioxidant compounds of red and white rice and changes in total antioxidant capacity during processing

Although most rice cultivars have whitish kernel, some varieties have a red testa. Aim of this work was to compare the total antioxidant capacity (TAC) and the antioxidant chemical composition (namely tocols, gamma-oryzanols, and polyphenols) of red and white rices. In addition, the effect of milling and cooking on antioxidants was investigated in both rices. Dehulled red rice showed a TAC more than three times greater than dehulled white rice and its high TAC was essentially characterized by the presence of proanthocyanidins (PA) and associated phenolics. Milling caused a significant loss of TAC, even if red rice maintained a higher TAC. Cooking caused a further loss of antioxidants, but when there was a full uptake of cooking water by the grains ("risotto") this loss was limited. Thus, the consumption of whole or partially milled rice cooked as risotto would be preferred to preserve its nutritional properties.     

Near infrared (NIR) spectroscopy as a tool for monitoring blueberry osmo-air dehydration process

Osmo-air dehydration treatments are widely applied to fruits in order to prolong shelf-life, reduce packaging and logistic costs, and improve both sensory and nutritional quality of the end products. In this work osmo-air dehydration was applied to blueberries (Vaccinium corymbosum), a fruit that is gaining increasing attention due to its high content of dietary antioxidants. In particular, the aim of this study was to investigate the performance of near infrared (NIR) spectroscopy as a tool for monitoring blueberry osmo and air dehydration processes.Blanched blueberries were dipped in sucrose and fructose + glucose osmotic solutions for 24 h, and the osmotic exchanges were determined by mass balances (water loss, solid gain, sugar intake, changes in total phenolics and anthocyanins); NIR spectra were collected in order to study modifications due to the osmotic treatments. Untreated and infused berries were subsequently air-dried at 70 °C to final moisture content of 10-14%. During drying chemical, nutritional and structural changes were monitored and NIR spectra were acquired on whole berries, using an optic probe working in diffuse reflectance. Spectral data were standardized, transformed into first derivative and processed by Principal Component Analysis. Results show that NIR spectroscopy was able to follow the osmotic and the air-drying processes and to discriminate untreated and osmo-dehydrated berries. Spectral differences reflect the main molecular modifications associated with water absorption bands due to OH stretch + OH bending and sugar absorption bands due to CH stretch + CH bending and OH stretch + OH bending. In order to investigate the variation of main constituents (sugars and water) involved in the osmo-dehydration process, two-dimensional correlation analysis of spectral data was also carried out.     

Fourier transform infrared and Raman spectroscopies for the rapid detection, enumeration, and growth interaction of the bacteria Staphylococcus aureus and Lactococcus lactis ssp. cremoris in milk

Staphylococcus aureus is one of the main pathogenic microorganisms found in milk and dairy products and has been involved in bacterial foodborne outbreaks in the past. Current enumeration techniques for bacteria are very time-consuming, typically taking 24 h or longer, and bacterial antagonism in the form of lactic acid bacteria (LAB) may inhibit the growth of S. aureus . Therefore, the aim of this investigation was to establish the accuracy and sensitivity of rapid nondestructive metabolic fingerprinting techniques, such as Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy (RS), in combination with multivariate analysis techniques, for the detection and enumeration of S. aureus in milk, as well as to study the growth interaction between S. aureus and Lactococcus lactis ssp. cremoris , a common LAB. The two bacterial species were investigated both in a pure monoculture and in a combined inoculated coculture after inoculation into ultraheated milk during the first 24 h of growth at 37 °C. Plating techniques were used to obtain primary reference data for viable bacteria counts. Principal component discriminant function analysis, canonical correlation analysis, partial least-squares (PLS), and kernel PLS (KPLS) multivariate statistical techniques were employed to analyze the data. FT-IR provided very reasonable quantification results both with PLS and KPLS, the latter providing marginally better predictions, with correlation coefficients in the test set (Q(2)) and training set (R(2)) varying from 0.64 to 0.76 and from 0.78 to 0.88 for different bacterial sample combinations. RS results were less encouraging with high degrees of error and poor correlation to viable bacterial counts. S. aureus growth was not inhibited by the presence of the LAB, but metabolic fingerprinting of the coculture indicated that the phenotype of this dual bacterial culture was closer to that of pure LAB cultures. In conclusion, FT-IR spectroscopy in combination with the above multivariate techniques appears to be a promising discrimination and enumeration analytical technique for the two bacterial species. In addition, it has been demonstrated that the L. cremoris metabolic effect in milk dominates that of S. aureus even though there was no growth antagonism observed.     

Developing mechanistic understanding of granular behaviour in complex moving geometry using the Discrete Element Method: Part B: Investigation of flow and mixing in the Turbula® mixer

As a consequence of increasing computer power and more readily useable commercial codes, the Discrete Element Method is being used in an increasing range of applications to simulate increasingly complex processes, often for evaluation of machinery prototypes. This presents the additional challenge of analysis of results, in particular to extract flow and mixing mechanisms with a view to improving design or operation.The Turbula mixer is a laboratory scale mixer, which is widely used in industry for the development or testing of new granular products. It comprises a simple vessel geometry (cylinder) that moves with a complex, yet regular, 3D motion giving rise to rapid and thorough mixing of the contents. The mixer presents an ideal system for evaluation of the power of DEM to simulate complex processes and to develop protocols for processing the results of the simulation. Initial results of this investigation, presented in this paper, show that mixing behaviour changes non-monotonically as a function of mixer speed. For the system of monodisperse glass spheres it is shown that mixing rate (in terms of number of mixer revolutions to achieve complete mixing) initially decreases with increasing speed and subsequently increases. The behaviour is suggestive of a transition in the flow process and is the subject of further investigation.     

Growth on poly(l-lactic acid) porous scaffold preserves CD73 and CD90 immunophenotype markers of rat bone marrow mesenchymal stromal cells

Few data are available on the effect of biomaterials on surface antigens of mammalian bone marrow-derived, adult mesenchymal stromal cells (MSCs). Since poly(l-lactic acid) or PLLA is largely used in tissue engineering of human bones, and we are developing a reverse engineering program to prototype with biomaterials the vascular architecture of bones for their bioartificial reconstruction, both in humans and animal models, we have studied the effect of porous, flat and smooth PLLA scaffolds on the immunophenotype of in vitro grown, rat MSCs in the absence of any coating, co-polymeric enrichment, and differentiation stimuli. Similar to controls on plastic, we show that our PLLA scaffold does not modify the distribution of some surface markers in rat MSCs. In particular, the maintained expression of CD73 and CD90 on two different subpopulations (small and large cells) is consistent with their adhesion to the PLLA scaffold through specialized appendages, and to their prominent content in actin. In addition, our PLLA scaffold favours retention of the intermediate filament desmin, believed a putative marker of undifferentiated state. Finally, it preserves all rat MSCs morphotypes, and allows for their survival, adhesion to the substrate, and replication. Remarkably, a subpopulation of rat MSCs grown on our PLLA scaffold exhibited formation of membrane protrusions of uncertain significance, although in a size range and morphology compatible with either motility blebs or shedding vesicles. In summary, our PLLA scaffold has no detrimental effect on a number of features of rat MSCs, primarily the expression of CD73 and CD90.     

Tailored Hydrogel Membranes for Efficient Protein Crystallization

Crystallization still represents the bottleneck in the process of protein structure determination at high resolution, despite high‐throughput structural genomics programs requiring optimized crystallization strategies regarding crystal quality, time, success rate, reproducibility, and used protein amount. On the other hand, the development of suitable materials for controlled heterogeneous nucleation might facilitate biomacromolecular crystallization in a variety of experimental conditions which are not conventionally fruitful. Here, the possibility to fabricate hydrogel membranes displaying controlled chemical composition and nanostructure and to use them as heterogeneous supports for biomacromolecular crystallization is demonstrated. Diverse gel morphologies are obtained by controlling phase separation kinetics during gel layer formation on membrane support. These composite materials are found to increase the efficiency of the crystallization process so that crystals with enhanced diffraction properties are produced at lower protein concentration than conventional technique, thus affording the possibility to improve current approaches to protein crystallization and to be adapted to specific targets.     

Identification and quantification of steryl glucosides in biodiesel

This paper discusses the nature and the chemical identification of a white, solid and insoluble residue isolated during the production of biodiesel, using palm or soybean oil as starting material. Using different isolation, purification and characterisation techniques, the solid was identified as a mixture of phytosteryl glucosides. A simple method for the quantitative evaluation of steryl glucoside (SG) concentrations in biodiesel samples is presented and discussed. Some preliminary results about the average concentration in biodiesel and about the solubility limits of SG are presented. The final section of this paper is dedicated to the impact of different crude oil refining techniques before the biodiesel synthesis reaction on the final SG concentration in biodiesel.     

Optimal input sets for time minimality in quantized control systems

Limited capacity of communication channels has brought to the attention of many researchers the analysis of control systems subject to a quantized input set. In some fundamental cases such systems can be reduced to quantized control system of type x⁺=x+u, where the u takes values in a set of 2m+1 integer numbers, symmetric with respect to 0. In this paper we consider these types of systems and analyse the reachable set after K steps. Our aim is to find a set of m input values such that the reachable set after K steps contains an interval of integers [−N, . . . , N] with N as large as possible. For m=2,3 and 4, we completely solve the problem and characterize the metric associated to this quantized control system.     

Titanium–Silica Catalysts for the Production of Fully Epoxidised Fatty Acid Methyl Esters

Grafted titanium-containing mesoporous silica catalysts were used in the selective epoxidation of C-18 unsaturated fatty acid methyl esters (FAMEs). High yields in mono- and diepoxide derivatives were obtained under acid-free reaction conditions with TBHP as oxidant. Ti-MCM-41 showed the best performance in terms of activity over the three FAMEs. Easy separation of the desired products and recycling of the catalyst were demonstrated.