In vitro antimicrobial activity of essential oil from endemic Origanum minutiflorum on ciprofloxacin-resistant Campylobacter spp.

This study evaluated the antimicrobial activities of an essential oil of Origanum minutiflorum (O. Schwarz and P.H. Davis) against ciprofloxacin-resistant Campylobacter spp., by broth microdilution and agar well-diffusion methods. Moreover, O. minutiflorum oil was analyzed by gas chromatography/mass spectrometry (GC/MS). Twenty-nine components were identified, representing 98.7 of the oil. The oil yield from the plants was 4.0–4.4% v/w. The major components of O. minutiflorum oil were carvacrol (73.9%) and p-cymene (7.20%). The oil has lower contents of carvacrol methyl ether (0.05%), heptadecanol (0.06%) and carvacryl acetate (0.06%). Twenty-one Campylobacter spp. (12 C. jejuni, 5 C. lari and 4 C. coli) strains using in this study were selected among 300 isolates according to their resistance to ciprofloxacin. The minimum inhibitory concentration (MIC) values for bacterial strains, which were sensitive to the essential oil of O. minutiflorum, were in the range of 7.8–800 μg/ml. The essential oil obtained showed strong antimicrobial activity against all of the tested ciprofloxacin-resistance Campylobacter spp. These results suggest that the essential of O. minutiflorum may be used as a natural preservative in food against food-born disease, such as Campylobacteriosis.     

Determination of optimal reactor system configuration for polymerization reactions. I. Free-radical polymerization at constant temperature

A systematic procedure was developed for selecting the type of reactors or a reactor system configuration for polymerization reactions. Two different mechanisms were investigated, and the “best” reactor system to give the desired quality of the product was determined using a systems synthesis technique. The behavior of the system in the neighborhood of the optimal solution was explored, and the effect of variation in the rate constants and the initial concentrations of the catalyst and the monomer on the optimal reactor system was examined. Recycle streams were introduced and their effect on the system performance was investigated, and finally the applicability of the systems synthesis technique to other polymer reactor design problems was discussed.     

Electro-Fenton degradation of antimicrobials triclosan and triclocarban

The antimicrobials triclosan (2,4,4′-trichloro-2′-hydroxydiphenyl ether) and triclocarban (N-(4-chlorophenyl)-N′-(3,4-dichlorophenyl)urea) have been degraded by four electro-Fenton systems using undivided electrolytic cells with a Pt or boron-doped diamond (BDD) anode and a carbon felt or O₂ diffusion cathode. The main oxidant is hydroxyl radical (OH) produced both on the anode surface from water oxidation and in the medium by Fenton's reaction, which takes place between electrogenerated H₂O₂ and Fe²⁺ coming from cathodic reduction of O₂ and Fe³⁺, respectively. Triclosan from saturated aqueous solutions of pH 3.0 is completely removed in all cells, decreasing its decay rate in the order: Pt/carbon felt > BDD/carbon felt > Pt/O₂ diffusion > BDD/O₂ diffusion, in agreement with their OH generation ability from Fenton's reaction. Glyoxylic, maleic and oxalic acids are identified as aliphatic intermediates. Complexes between oxalic acid and iron ions persist largely in solution, although Fe²⁺-oxalato complexes are mineralized by OH in the medium and Fe³⁺-oxalato complexes are destroyed by OH on BDD. Analogous treatments of more concentrated triclosan solutions using a 20:80 (v/v) acetonitrile/water mixture as solvent evidence the role of hydroxyl radicals along the degradation. In this hydroorganic medium hydroxylated derivatives such as 2,4-dichlorophenol, 4-chlorocatechol, chlorohydroquinone and chloro-p-benzoquinone, and carboxylic acids such as maleic, oxalic, formic and acetic acids are detected as products. Complete destruction of iron-oxalato complexes and released Cl⁻ ion involves some oxidizing species coming from parallel acetonitrile oxidation. The same electro-Fenton systems also yield the overall removal of triclocarban in acetonitrile/water mixtures, giving rise to urea, hydroquinone, chlorohydroquinone, 1-chloro-4-nitrobenzene and 1,2-dichloro-4-nitrobenzene as primary intermediates.     

Reliability of new packaging concepts

Today, most of the microelectronics packaging needs are met by semiconductor devices in plastic surface mount (SM) packages. Microelectronics packaging of the future will be either bare chip or chip size/scale packaging (CSP). Of the 45 billion SM packaged ICs to be manufactured in 2000, CSPs will be a small 3.4% but growing at 62% (compound annual growth rate). The use of direct bonded chip-on-board and flip chip (FC) technology for custom solutions may not match the growth of CSPs. The popcorn problem of existing plastic packages has been solved in many ways including the use of hydrophobic composite encapsulants as the best solution and thorough bake-out and storage as the long-standing practical solution. The popcorn problem which was more severe with the smaller and thinner encapsulations of CSPs is also solved with modern hydrophobic materials and new non-paddle package designs. Further, there is good evidence that reliability is not impaired even by delaminations in the bulk of the encapsulations – small delaminations being an inevitable consequence of stress relaxation following transfer moulding. CSP and FC bump joint reliability is safeguarded both by good soldering practice and by effective underfill. High reliabilities are achievable with the range of new packages built from modern materials, with random failure rates down to 10 failure units, infant mortalities controlled to low levels by six sigma manufacturing processes and wearout lifetimes exceeding 100 years even in tropical operation.     

Airborne video registration and traffic-flow parameter estimation

This paper investigates airborne helicopter video for estimating traffic parameters. Roll, pitch, and yaw of the helicopter make the video unstable, difficult to view, and the derived parameters less accurate. To correct this, a frame-by-frame video-registration technique using a feature tracker to automatically determine control-point correspondences is proposed. This converts the spatio-temporal video into temporal information, thereby correcting for airborne platform motion and attitude errors. The registration is robust, with the residual jitter being less than a few pixels over hundreds of frames. A simple vehicle-detection scheme identifies vehicle locations in the video, which are then tracked by the feature tracker, enabling us to estimate average velocity, instantaneous velocity, and other parameters automatically to within 10% of manual measurements. The entire process of registration, detection, tracking, and estimation takes only a few seconds for each frame. A prototype multimedia geographic information system (GIS) is created as a visualization tool for viewing the registered video, other airborne or satellite imagery, and data pertaining to georeferenced locations within a base map.     

Optical properties of CdxZn(1−x)O films deposited by ultrasonic spray pyrolysis method

Cd_xZn_(1−x)O (x = 0, 0.59, 0.78 and 1) films have been produced by ultrasonic spray pyrolysis technique using aqueous solutions of CdCl₂ H₂O and ZnCl₂ on the microscope glass substrate between 325 and 400 °C. The Cd_xZn_(1−x)O samples have been crystallized both cubic and hexagonal structures. The optical properties of the samples were characterized by transmittance and absorption spectroscopy measurements. Transmissions of the samples have decreased with increasing x values. The optical band gap energies of the Cd_xZn_(1−x)O samples from the absorption spectra have been calculated between 2.48 and 3.23 eV by different Zn contents. The samples were annealed at 350 and 450 °C. The optical band gap energy has decreased at 350 °C whereas it increased at 450 °C.     

Thermo-mechanical stability of a cellular assembly of carbon nanotubes in air

Carbon nanotubes (CNT) in bulk form offer outstanding structural and functional properties, and are shown to remain viscoelastic over a wide temperature range (77–1273 K) under inert conditions. We examine the quasi-static and dynamic compressive mechanical response of these cellular CNT materials in ambient air up to a temperature of 773 K. In uniaxial quasi-static compression, several displacement bursts are noted at large strains. These are results of the slippage and zipping of the CNT, and lead to significant mechanical energy absorption. Results of the dynamic mechanical analysis experiments show no degradation in storage modulus and loss coefficient for up to 20 h at 673 K. Hence, these stable cellular CNT structures can be utilized up to a maximum temperature of 673 K in air, which is much higher than the best polymers.     

Fano-resonant asymmetric metamaterials for ultrasensitive spectroscopy and identification of molecular monolayers

Engineered optical metamaterials present a unique platform for biosensing applications owing to their ability to confine light to nanoscale regions and to their spectral selectivity. Infrared plasmonic metamaterials are especially attractive because their resonant response can be accurately tuned to that of the vibrational modes of the target biomolecules. Here we introduce an infrared plasmonic surface based on a Fano-resonant asymmetric metamaterial exhibiting sharp resonances caused by the interference between subradiant and superradiant plasmonic resonances. Owing to the metamaterial's asymmetry, the frequency of the subradiant resonance can be precisely determined and matched to the molecule's vibrational fingerprints. A multipixel array of Fano-resonant asymmetric metamaterials is used as a platform for multispectral biosensing of nanometre-scale monolayers of recognition proteins and their surface orientation, as well as for detecting chemical binding of target antibodies to recognition proteins.