Diaminofuroxan: Synthetic Approaches and Computer‐Aided Study of Thermodynamic Stability

Different approaches to synthesize diaminofuroxan are presented herein. Mathematical and quantum chemical methods were used to study the possible reasons for failures in the syntheses of diaminofuroxan. Additionally, structural isomers of this compound were generated. With the help of the results of quantum chemical calculations at levels of DFT B3LYP 6‐31G(d) and MP2 6‐31G(d), screening of the most stable isomeric forms in the gaseous phase and in water was performed. It was shown that diaminofuroxan is not the thermodynamically most stable isomer among its structural analogues.     

Influence of Macromolecular Brushes with Polyimide Backbones and Poly(methyl methacrylate) Side Chains on Structure,Physical, and Transport Properties of Polyphthalamide

Composite films based on polyamide (poly(m-phenylene-iso-phthalamide)) (PA) and a brush-like polymer with polyimide (PI) backbone and side poly(methyl methacrylate) chains (PI-PMMA) were prepared by mixing individual solutions of PA and PI-PMMA and subsequent film casting. Macromolecular brushes with the same backbone length and density of side chains but with various lengths of side PMMA chains were synthesized via activator generated by electron transfer atom transfer radical polymerization. Interactions between PA and PI-PMMA, as well as distribution of PI-PMMA filler inside the PA matrix, were studied by viscometry, dynamic light scattering, differential scanning calorimetry, scanning electron microscopy, and IR spectroscopy. The mechanical properties of polymer samples were also investigated. Microphase separation was revealed in PA/PI-PMMA films. The length of side chains influences interactions between PA and PI-PMMA. At the same time, the degree of reduction in the rigidity parameters and in the elasticity parameter depends on the side chain length. Diffusion membranes were prepared on the basis of compositions with the best mechanical properties; these membranes proved to be highly efficient in pervaporation of methanol–hexane mixture. It was established that the fluxes and separation factors of the studied membranes are several times higher as compared to the corresponding characteristics of known commercial membranes. POLYM. ENG. SCI., 60:481–490, 2020. © 2019 Society of Plastics Engineers     

Solution Structure and Dynamics of the Small Protein HVO_2922 from Haloferax volcanii

Past sequencing campaigns overlooked small proteins as they seemed to be irrelevant due to their small size. However, their occurrence is widespread, and there is growing evidence that these small proteins are in fact functionally very important in organisms found in all kingdoms of life. Within a global proteome analysis for small proteins of the archaeal model organism Haloferax volcanii, the HVO_2922 protein has been identified. It is differentially expressed in response to changes in iron and salt concentrations, thus suggesting that its expression is stress-regulated. The protein is conserved among Haloarchaea and contains an uncharacterized domain of unknown function (DUF1508, UPF0339 family protein). We elucidated the NMR solution structure, which shows that the isolated protein forms a symmetrical dimer. The dimerization is found to be concentration-dependent and essential for protein stability and most likely for its functionality, as mutagenesis at the dimer interface leads to a decrease in stability and protein aggregation.     

PBS-co-DEG与热塑性淀粉共混膜的性能研究

采用流延法制备了不同二甘醇(DEG)含量的聚丁二酸丁二醇二甘醇共聚酯(PBS-co-DEG)与热塑性淀粉(TPS)共混的复合膜,通过核磁共振氢谱仪、傅里叶变换红外光谱仪、凝胶渗透色谱仪、热重分析仪、紫外–可见分光光度计、偏光显微镜等对共聚酯的结构及复合膜的性能进行了表征和测试,采用N435脂肪酶对复合膜进行了降解实验。结果表明,随DEG含量的增加PBS-co-DEG/TPS复合膜的亲水性、光透过率和断裂伸长率均有所增加,热稳定性变化不明显;与PBS/TPS复合膜相比,PBS-co-DEG/TPS复合膜的酶降解速率显著提高。     

Investigating the Role of Conformational Effects on Laccase Stability and Hyperactivation under Stress Conditions

Fungal laccase from Steccherinum ochraceum 1833 displays remarkable stability under different harsh conditions: organic/buffer mixtures, thermal treatment, and microwave radiation. The behavior is particularly significant in the light of the sharp inactivation observed for two different fungal laccases. Laccase from S. ochraceum 1833 also displays hyperactivation under mild thermal treatment (60 °C). Molecular dynamics simulations at 80 °C explained how this laccase retains the geometry of the electron transfer pathway, thereby assuring electron transfer through the copper ions and thus maintaining its catalytic activity at high temperature. Spectroscopic studies revealed that the thermal activation corresponds to specific conformational changes in the protein. The results indicate that this laccase is potentially applicable under denaturing conditions that might be beneficial for the biotransformation of recalcitrant substrates.     

One Question,Multiple Answers: Biochemical and Biophysical Screening Methods Retrieve Deviating Fragment Hit Lists

Fragment‐based lead discovery is gaining momentum in drug development. Typically, a hierarchical cascade of several screening techniques is consulted to identify fragment hits which are then analyzed by crystallography. Because crystal structures with bound fragments are essential for the subsequent hit‐to‐lead‐to‐drug optimization, the screening process should distinguish reliably between binders and non‐binders. We therefore investigated whether different screening methods would reveal similar collections of putative binders. First we used a biochemical assay to identify fragments that bind to endothiapepsin, a surrogate for disease‐relevant aspartic proteases. In a comprehensive screening approach, we then evaluated our 361‐entry library by using a reporter‐displacement assay, saturation‐transfer difference NMR, native mass spectrometry, thermophoresis, and a thermal shift assay. While the combined results of these screening methods retrieve 10 of the 11 crystal structures originally predicted by the biochemical assay, the mutual overlap of individual hit lists is surprisingly low, highlighting that each technique operates on different biophysical principles and conditions.     

Ethylene polymerization with homogeneous and heterogeneous catalysts based on bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron complexes

A series of bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron chloride complexes were immobilized on oxide supports. The kinetics of ethylene polymerization by both homogeneous and heterogeneous systems was followed, the catalysts mostly demonstrating high activities. The effect of the ligands nature and reaction conditions on the catalytic activities and molecular weights of the resultant polyethylenes was examined. In contrast to homogeneous systems, the supported iron complexes were found to exhibit high and stable activity upon activation with triisobutyl aluminium, producing high‐molecular‐weight polyethylene with good morphology. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42674.     

Cellulose Aerogel Fibers Tested on a REXUS 18 Rocket – The ACTOR Project

Aerogels are high‐performance materials used for space and aviation purposes. Cellulose aerogel fibers have been investigated under real space conditions for their insulation properties. The experiments were carried out in a one‐stage high‐altitude research rocket of the improved ORION type. A cuboid module with measurement cells, camera modules, and electronic devices has been developed for monitoring the insulation behavior of cellulose aerogel non‐woven samples. The thermal behavior of these samples has been analyzed and compared to cellulose cloth (cotton) and aluminum for reference.     

Biological Evaluation and X‐ray Co‐crystal Structures of Cyclohexylpyrrolidine Ligands for Trypanothione Reductase,an Enzyme from the Redox Metabolism of Trypanosoma

The tropical diseases human African trypanosomiasis, Chagas disease, and the various forms of leishmaniasis are caused by parasites of the family of trypanosomatids. These protozoa possess a unique redox metabolism based on trypanothione and trypanothione reductase (TR), making TR a promising drug target. We report the optimization of properties and potency of cyclohexylpyrrolidine inhibitors of TR by structure‐based design. The best inhibitors were freely soluble and showed competitive inhibition constants (K_i) against Trypanosoma (T.) brucei TR and T. cruzi TR and in vitro activities (half‐maximal inhibitory concentration, IC₅₀) against these parasites in the low micromolar range, with high selectivity against human glutathione reductase. X‐ray co‐crystal structures confirmed the binding of the ligands to the hydrophobic wall of the “mepacrine binding site” with the new, solubility‐providing vectors oriented toward the surface of the large active site.