Image denoising based on wavelets and multifractals for singularity detection.

This paper presents a very efficient algorithm for image denoising based on wavelets and multifractals for singularity detection. A challenge of image denoising is how to preserve the edges of an image when reducing noise. By modeling the intensity surface of a noisy image as statistically self-similar multifractal processes and taking advantage of the multiresolution analysis with wavelet transform to exploit the local statistical self-similarity at different scales, the pointwise singularity strength value characterizing the local singularity at each scale was calculated. By thresholding the singularity strength, wavelet coefficients at each scale were classified into two categories: the edge-related and regular wavelet coefficients and the irregular coefficients. The irregular coefficients were denoised using an approximate minimum mean-squared error (MMSE) estimation method, while the edge-related and regular wavelet coefficients were smoothed using the fuzzy weighted mean (FWM) filter aiming at preserving the edges and details when reducing noise. Furthermore, to make the FWM-based filtering more efficient for noise reduction at the lowest decomposition level, the MMSE-based filtering was performed as the first pass of denoising followed by performing the FWM-based filtering. Experimental results demonstrated that this algorithm could achieve both good visual quality and high PSNR for the denoised images.     

消费品说明中警示信息有效性的工效学研究(Ⅰ)——警示信息对消费者危险感受与商品危险性之间关系的影响

该研究采用问卷法，通过对３０种消费品的调查，分析了消费者对消费品说明中警示信息的阅读倾向性，消费者的危险感受、消费者安全使用商品的自信度、遵守警示信息的可能性、主观危险估计和客观危险性这几项因素之间的关系。结果表明：消费者的危险感受与阅读警示信息的倾向性、遵守警告的要求之间存在高度的一致性；且与自信度呈负相关，所以可以通过研究消费者的危险感受来研究警示信息的有效性；消费者的危险感受、主观危险估计常与商品的客观危险性不一致，所以必须采取一些措施来矫正消费者的危险感受，以确保警示信息发挥应有的安全保障作用     

液态混合有机标准物质研究

本研究采用重量法配制有机液态混合标样 ,并对配制方法、混合标样的均匀性、稳定性及影响不确定度的因素进行了研究 ,并用气相色谱法进行了比对分析。经稳定性监测 ,稳定度大于等于一年 ,不确定度小于± 2 %。     

面向共同配送的建模仿真研究

分析了共同配送的工作程序、建模方法及相关算法。采用基于面向对象的结构化的建模分析方法和eM-plant仿真平台,建立了共同配送的仿真模型。将电子地图导入仿真模型,并运用启发式算法自动规划出车辆配送路线,同时考虑各种确定性与不确定性因素对模型的影响。选用实例验证了该仿真方法。     

浅谈采用短木桩加土工网碎石垫层处理挡墙软基

结合工程实例，对采用传统的短木桩加新兴的土工合成材料——土工网及碎石垫层构成复合基础，处理河岸挡墙软基进行探讨，该方法在软土层厚度不超过4．0m的条件下，技术可靠，施工简单，工期短，造价低。     

晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

一种应用于二次布局的有效划分方法

提出了一种基于二次布局的结合MFFC结群和hMETIS划分的算法.实验表明:这种方法能得到很好的布局结果,但是运行消耗的时间比较长.为了缩短划分在二次布局中运行的时间,提出了一种改进的结群算法IMFFC,用它在二次布局中做划分.与前者相比较,这种方法虽然布局质量稍差,但速度更快.     

Closed-loop optimal control-enabled piezoelectric microforce sensors

This paper presents a closed-loop optimally controlled force-sensing technology with applications in both micromanipulation and microassembly. The microforce-sensing technology in this paper is based on a cantilevered composite beam structure with embedded piezoelectric polyvinylidene fluoride (PVDF) actuating and sensing layers. In this type of sensor, the application of an external load causes deformation within the PVDF sensing layer. This generates a signal that is fed through a linear quadratic regulator (LQR) optimal servoed controller to the PVDF actuating layer. This in turn generates a balancing force to counteract the externally applied load. As a result, a closed feedback loop is formed, which causes the tip of this highly sensitive sensor to remain in its equilibrium position, even in the presence of dynamically applied external loads. The sensor's stiffness is virtually improved as a result of the equilibrium position whenever the control loop is active, thereby enabling accurate motion control of the sensor tip for fine micromanipulation and microassembly. Furthermore, the applied force can be determined in real time through measurement of the balance force.     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

双层堤基的井涌破坏与无害管涌

双层堤基水文地质结构特殊，堤基承压水常具独特的“渗而不流”特征。在“不流”条件下，堤后盖层薄弱处受超高承压水头顶裂破坏，产生的局部冒水孔实属承压自流井，由此形成的管涌实质为井涌。底部进水的承压井流影响范围不大，井涌的破坏范围更小，据此可区分出有害管涌与无害管涌。前者局限于堤脚附近，小范围压渗为首选方案；对后者，既无需专门防治，更不必追求根治。