棕棉混纺针织纱的工艺实践

探讨棕棉混纺针织纱的纺纱工艺.针对棕棉和有机棉的不同性能特点,确定合理的纺纱方案,在纺纱各工序采取一系列工艺技术措施,采用并条混和的工艺路线,通过优化工艺、严格控制好各工序温湿度,最终顺利生产出棕棉/长绒棉/有机棉40/35/25 14.6 tex混纺针织纱,满足了针织纱的使用要求.     

Free amino acids identification and process optimization in greengage wine fermentation and flavor formation

Greengage wine with low alcohol content is increasing in popularity owing to its fruity taste and rich nutrition. The key to wine aroma and taste is flavor substances like free amino acids (FAAs), volatile fatty acids, higher alcohols, and esters. Amino acid (AA) metabolisms in yeast are an important source of these secondary compounds, which vary with the fermentation conditions. This study explored and optimized the impact of different parameters (carbon source, inoculum, pH, temperature) on FAA contents and dynamics in greengage wine. The results demonstrated that total and essential amino acid (EAA) content rose with a higher proportion of glucose, less yeast inoculation, higher temperature, and higher initial pH. With the results obtained it was concluded that the condition of 22.4°C, pH 4.5, and 3% inoculation was optimum for a 14.9-fold increase of EAAs in fermented greengage wine. In the long run, the research will aid in the development of the greengage brewing industry.     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Densification and joining of a (HfTaZrNbTi)C high-entropy ceramic by hot pressing

A bulk (Hf_0.2Ta_0.2Zr_0.2Nb_0.2Ti_0.2)C high-entropy ceramic (HEC) with a high density was prepared by hot pressing (HP), and through a robust joining technique, large-sized piece was fabricated. A hot-pressed carbide HEC with a single-phase and homogeneous composition was obtained at the sintering temperatures from 1800 to 1950 °C for 30 min under a pressure of 30 MPa. The influence of sintering temperature on the mechanical properties of the HEC was investigated, and the flexural and compressive strengths were reported. Additionally, the feasibility of active brazing of this HEC was studied and solid joints with high shear strength were obtained by atomic diffusion and chemical reaction at the interface, providing a key approach to fabricate complex components of HECs.     

Study on chaotic oscillator-based algorithm for weak GLONASS signal acquisition

According to the characteristics of the chaotic oscillator in detecting weak signals, an algorithm based on Duffing chaotic oscillator array was proposed for acquisition of weak GLONASS signals. By means of GLONASS intermediate frequency and Duffing chaotic oscillator models, Lyapunov exponent is adopted to judge the critical condition of phase track and decide whether GLONASS signals exist or not by the change of the critical condition, and numeric iteration procedure is used to calculate the exponent. Finally, the performance of algorithm is simulated using GLONASS intermediate frequency data. The results indicate that acquisition algorithm can satisfy the need of object positioning in low signal-to-noise ratio environment.     

Effect of titanium diboride on the homogeneity of boron carbide ceramic by flash spark plasma sintering

A novel method, namely flash spark plasma sintering (FSPS), combining flash sintering and electric field assisted sintering, was utilized to densify boron carbide/titanium diboride (B₄C/TiB₂) composites. Further, sintering homogeneity of the composites with different contents of TiB₂ was systematically investigated and theoretical model was built. Results indicated that addition of 50?wt% TiB2 led to the densification of B₄C/TiB₂ composite by up to 97.7% with regional range 1.9% at 1872?°C under pressure of 4?MPa in 60?s. The preferential pathway of TiB₂ network proves to disperse the central current and distribute thermal flow throughout the specimen possibly via tunneling, electronic field emission effect at first stage and lower-resistance composite pathway latter, contributing to the increased homogeneity.     

Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism

SiC is a promising functional ceramic material with many great properties. High concentrated SiC slurry with excellent rheology and stability is required in some processes of ceramic forming. In this work, the dispersion of SiC powders was obviously improved by ternary modifiers: γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560), sodium humate and sodium dodecyl sulfate (SDS). Modified SiC slurry showed the lowest viscosity of 0.168 Pa s at a solid content of 50 vol%. The maximum absolute value of zeta potential of SiC increased from 47.3 to 61.6 mV by modification. Sedimentation experiments showed that a highly stable suspension of modified SiC was obtained at pH 10. SiC green body with high density of 2.643 g/cm³ was prepared with modified powders by slip casting. X-ray photoelectron spectra (XPS) and thermogravimetry (TG) measurements indicated the adsorption of modifiers on SiC surface. Therefore, modified SiC powders could stably disperse in aqueous media due to the increase of electrosteric repulsion between particles. The novel strategy used in this study could further improve the dispersion of SiC powders.     

Anthocyanin-fortified konjac glucomannan/sodium alginate composite edible boba: characteristics of texture,microstructure, in vitro release behaviour and antioxidant capacity

Konjac glucomannan/sodium alginate composite edible boba (KGM/SA-boba) with good taste is very popular in China, and it is an outstanding carrier for health potential ingredients. In this work, KGM/SA-boba were fortified with 0.25, 0.50, 0.75 and 1.00% purple sweet potato anthocyanin (PSPA), then characterised by the water distribution, texture, microstructure, in vitro release property of PSPA and antioxidant capacity. LF-NMR analysis demonstrated that the free water of KGM/SA-boba could transfer to tightly bound water with the addition of PSPA that made it with better water-binding ability, higher springiness and lower hardness. And the results of SEM and rheology showed that PSPA could stabilise the microstructure of KGM/SA-boba by forming more amorphous regions and hydrogen bonds proved by the results of DSC and FT-IR. Furthermore, 50% of PSPA in PSPA-fortified KGM/SA-boba can be released at the first hour in a simulated gastrointestinal environment. And the scavenging capacity of DPPH and ABTS of the PSPA-fortified KGM/SA-boba after digestion was higher than that of PSPA alone. Generally, PSPA could improve the texture while KGM/SA-boba in turn would make PSPA more stable in the gastrointestinal digestive system.     

Fabrication and photocatalytic performance of one-dimensional Ag3PO4 sensitized SrTiO3 nanowire

The 1D Ag₃PO₄ sensitized SrTiO₃ nanowires are prepared by simple route of electrospinning-in situ deposition technique. The results of the thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive Spectrometer (EDS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–Visible diffuse reflectance spectroscopy (UV–Vis) indicate that the Ag₃PO₄ nanoparticles has been deposited on the surface of the SrTiO₃ nanowires successfully. Experimental results showed that compared with pure SrTiO₃, the as-prepared 1D Ag₃PO₄ sensitized SrTiO₃ nanowires exhibit obvious enhancement of photocatalytic performance and stability. Especially, the Ag₃PO₄/SrTiO₃ (3AS sample) had a satisfactory photocatalytic activity for degrading methylene blue (MB) more than 98% under visible light irradiation. As to pure SrTiO₃ and Ag₃PO₄, only 9.8% and 49% of MB was decomposed after 35?min irradiation respectively. Furthermore, the mechanism of the enhancing photocatalytic activity could be ascribed to the nano-heterojunction of the Ag₃PO₄/SrTiO₃, the visible light response of the Ag₃PO₄, and the 1D structure of the nanowires.