Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Relative reactivity of phenylboronic acid to phenylboronate ion toward L-lactate and mandelate at physiological pH

Kinetic studies were performed on the reactions of phenylboronic acid with L-lactic acid and mandelic acid in acidic aqueous and alkaline solutions in order to specify reactive species in these reactions. It was confirmed that the diprotonated ligand (H₂L: L-lactic acid or mandelic acid) is less reactive than the monoprotonated ligand (HL^?: L-lactate ion or mandelate ion), which made possible direct determination of the rate constants of phenylboronic acid (PhB(OH)₂) and its conjugate base, phenylboronate ion (PhB(OH)₃^?). It was found that PhB(OH)₂ is more reactive than PhB(OH)₃^?. On the basis of kinetic results, it was concluded that the most reactive species are PhB(OH)₂ and HL^? at physiological pH 7.4, so the reaction in the boronic acid-based sensor for L-lactate mainly would occur between these species.     

Internal-external transition for the oxidation of Fe-Cr-Ni austenitic stainless steels in steam

Several Fe-Cr-Ni austenitic stainless steels (Cr wt.%: 13–25, Ni wt.%: 15) were oxidized in steam for 1000 hr at 500–900°C. The oxide scales were examined and categorized with respect to the chromium concentration and the grain size of the base metal. Experiments showed three conditions for the critical bulk Cr concentration and the oxidation temperature at which the oxidation behavior changed drastically. Metallographic examination showed that two of these three conditions resulted from the internal-external transition of Cr₂O₃ either on the metal surface or along the grain boundaries of the base metal. Attempts were made to interpret these conditions from the available oxidation theories. Atkinson's treatment was employed with some modification to incorporate the grain-boundary diffusion of Cr in the base metal. The calculation basically explained the internal-external transition for the oxidation of these steels.     

Structure of silane layer formed on silica particle surfaces by treatment with silane coupling agents having various functional groups

The surface treatment of spherical silica particles with silane coupling agents having various organic functional groups was conducted and the effect of the alkoxy group number on the molecular flexibility of the silane chain with multilayer coverage was investigated using ¹H-pulse nuclear magnetic resonance spectroscopy. The silica particles were treated with 2-propanol solution and heated at 120?°C for 24?h after solvent evaporation to accelerate the polycondensation reaction of silanol groups. For multilayer coverage, flexible linear chain and rigid network structures were expected to form on the surface from the di- and trialkoxy structures, respectively. However, the rigid network structure was formed from both the di- and trialkoxy structures with glycidoxy, amino, and methacryloxy functional silanes. Ring opening of the epoxy group occurred, followed by reaction to form the network structure, even with the dialkoxy structure of the glycidoxy functionality. Ring opening of the epoxy group could be reduced by pH adjustment of the treatment solution and the linear chain structure was formed from the dialkoxy structure. In the case of amino and methacryloxy functional groups, hydrogen bonds were formed between the amino or methacryloxy groups and the silanol groups on the silica surface or silane molecules.     

Preparation of ultrafine polyurethane fiber web by laser‐electrospinning combined with air blowing

Thermoplastic polyurethane fiber webs were prepared using a laser‐heated electrospinning process combined with air blowing. The effect of spinning conditions such as air flow rate and air temperature on fiber diameter and molecular weight was investigated. Although the average fiber diameter decreased with increased air flow rate at each air temperature, the diameter increased when the air flow rate was >15 NL min^?1. In addition, the fiber was comparatively thicker with an increase in the air temperature. The variation in the fiber diameter tends to increase with the air flow rate, and a reduction in the molecular weight of the fiber by thermal degradation was suppressed. The thinnest and most uniform fiber with a diameter of 0.9 µm and a diameter coefficient variation of 15% was obtained at an air temperature of 25°C under an air flow rate of 15 NL min^?1. This fiber also had a minimum of decreased molecular weight. POLYM. ENG. SCI., 54:2605–2609, 2014. © 2013 Society of Plastics Engineers     

Ruthenium(IV) dioxide-catalyzed reductive gasification of intractable biomass including cellulose, heterocyclic compounds, and sludge in supercritical water

Catalytic reduction gasification in the presence of ruthenium(IV) dioxide (RuO₂) in supercritical water was used to decompose intractable biomass. The gasification of model biomass samples (glucose, cellulose, and heterocyclic compounds), and low-purity biomass samples obtained from a paper-recycling facility (paper sludge) and from a sewage treatment plant (sewage sludge) were studied. In clear contrast to another catalysts, the RuO₂ catalyst completely gasified cellulose to produce mainly hydrogen, methane, and carbon dioxide under various conditions (e.g., 673 K at 30 MPa and 773 K at 50 MPa). As for heterocyclic compounds, nitrogen compounds did not deactivate the RuO₂ catalyst; the gasification of carbazole proceeded completely. Furthermore, paper sludge was almost completely decomposed in supercritical water with RuO₂ at 723 K.     

Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Flight Model Performance of 640-GHz Superconductor–Insulator–Superconductor Mixers for JEM/SMILES Mission

Performances of 640-GHz Superconductor–Insulator–Superconductor (SIS) mixers developed for the Superconducting Submillimeter-Wave Limb-Emission Sounder (SMILES) mission are described. SMILES, launched in September 2009, is the first mission to observe atmosphere from space using superconducting mixers. Ground test performances of the SIS mixers show very flat gain and noise characteristics in their observation bands in compliance with the specifications required for SMILES.     

F2 laser deposition of CdTe microcrystallites-dopedfluoropolymer thin films

Crystalline thin films of polytetrafluoroethylene (PTFE) were deposited by F₂ laser (157 nm) ablation in 200 mTorr Ar gas atmosphere. Combining this PTFE thin-film process with CdTe microcrystallites synthesis in sizes of 3-7 nm via KrF laser (248 nm) ablation, CdTe microcrystallites-doped PTFE thin films were fabricated. The X-ray photoemission spectra show that the main architecture of PTFE and CdTe are maintained in the doped films. CdTe microcrystallites doped in PTFE matrix show an absorption edge shift toward higher energy and a third-order optical nonlinearity, which are induced by the quantum size effect     

Precise Measurements of the Vapor-Liquid Equilibria (VLE) of HFC-32/134a Mixtures Using a New Apparatus

A new apparatus for precise measurements of the vapor-liquid equilibria of mixtures by the circulation method has been developed. This apparatus has two special components: a high-stability temperature control system and a helium pressurization system. The temperature in the liquid bath surrounding the sample cell is kept constant within ±0.5mK. The helium pressurization system increases the pressure of the sampled mixture when measuring the compositions at low temperatures by gas chromatography. With these components, the uncertainty in measuring the vapor-liquid equilibria has been reduced. Using this apparatus, the vapor-liquid equilibria of HFC-32/134a mixtures were measured in a temperature range of 263.15 to 293.15K. These results are in good agreement with the calculated results from REFPROP (Ver. 6.01) with a relative pressure difference of about 2%.