Oxidation and Oxidative Bromination Reactions Catalyzed By a Reusable Polymer-Anchored Iron(III) Complex in Water at Room Temperature

A polymer-anchored iron(III) catalyst was synthesized and characterized. Its catalytic activity was evaluated for the oxidation of various alkenes, sulfides, aromatic alcohols and ethylbenzene with 30 % H₂O₂ as the oxidizing agent. The catalyst was also effective for the oxidative bromination reaction with 80–100 % selectivity of monobrominated products with H₂O₂/KBr at room temperature. The above reactions require a minimum amount of H₂O₂ and short reaction time. Most importantly, all the above reactions occur in aqueous medium. The catalyst can be facilely recovered and reused six-atimes without significant decrease in its activity and selectivity.     

Channel assignment mechanism for cognitive radio network with rate adaptation and guard band awareness: batching perspective

Wireless Networks - Cognitive radio (CR) is a promising technology that allows devices to effectively utilize the underutilized or unutilized portions of the licensed spectrum. In literature,...     

Effect of Synthesis Technique and Carbonate Content on the Crystallinity and Morphology of Carbonated Hydroxyapatite

The syntheses of nanosized carbonated hydroxyapatite（CHA） were performed by comparing dropwise and direct pouring of acetone solution of Ca（N0₃）₂-4H₂0 into mixture of（NH₄）₂HP0₄ and NH₄HCO₃ at room temperature controlled at pH 11.Direct pouring method was later applied to study the increment of carbonate content in syntheses.The as-synthesized powders were characterized by various characterization techniques.The crystallographic results of the produced powders were obtained from X-ray diffraction analysis,whilst the carbonate content in the produced powders was determined by the CHNS/O elemental analyzer.Fourier transform infrared analysis confirmed that the CHA powders formed were B-type.Field emission scanning electron microscopy revealed that the powders were highly agglomerated in nanosized range and hence energy filtered transmission electron microscopy was employed to show elongated particles which decreased with increasing carbonate content.     

Chryseobacterium meningosepticum in a parapneumonic effusion in a chronic kidney disease patient on hemodialysis

Chryseobacterium meningosepticum is an uncommon human pathogen, which is an inhabitant of soil and water. It should be included in the list of suspected nosocomial infections, especially in patients with immunocompromised status. C. meningosepticum infections are not common but are clinically important because the organism is naturally resistant to multiple antibiotics. We report a case where the bacterium was isolated from the pleural fluid from a chronic kidney disease patient on hemodialysis, who developed pneumonia with complicated parapneumonic effusion. To the best of our knowedge, this is the first case where C. meningosepticum is isolated from the pleural effusion, from India.     

Efficiency enhancement by mixed cation effect in dye-sensitized solar cells with a PVdF based gel polymer electrolyte

This paper reports the effect of using a mixed iodide salt system with two dissimilar cations to enhance the efficiency of dye-sensitized solar cells made with polyvinylidenefluoride (PVdF) based gel electrolyte. Instead of a single iodide salt, a mixture of potassium iodide (KI) with a small K⁺ cation and tetrapropylammonium iodide (Pr₄NI) with a bulky Pr₄N⁺ cation were used to provide the required iodide ion conductivity. Solar cells of configuration FTO/TiO₂/Dye/electrolyte/Pt/FTO were fabricated using a mesoporous TiO₂ electrode sensitized with a Ruthenium dye (N719). With identical electrolyte compositions, the cells with KI and Pr₄NI alone gave efficiencies of 2.37% and 2.90% respectively. The cell with the mixed iodide system, KI:Pr₄NI = 16.6:83.4 (% weight ratio), however, showed an enhanced efficiency of 3.92% with a short circuit current density of 9.16 mA cm⁻², open circuit voltage of 674.4 mV and a fill factor of 63.4%.     

The status of e‐commerce applications in Malaysia

Abstract

The main focus of this study is the status of e‐commerce usage in Malaysia, specifically five main business processes and activities, namely, marketing, advertising, customer support and service, order and delivery and payment. A total of twenty applications categorized under the five processes and activities were identified and analysed. From the twenty applications studied, communications via e‐mail was found to be the most widely used (70%). On the other hand, applications categorized under the payment category such as the smart card and prepaid card was used by only seven percent of the organisations. This demonstrated that Malaysian organisations were using e‐commerce applications. However the usage was limited. The results of the survey indicated that security issues seemed to be the main barrier to the implementation of e‐commerce. Organizations were reluctant to use e‐commerce as they felt that the transactions conducted electronically were open to hackers and viruses, which are beyond their control. They were also skeptical about the security measures that were implemented to safeguard on‐line payment transactions.     

Optimization of culture conditions for biohydrogen production from sago wastewater by Enterobacter aerogenes using Response Surface Methodology

Sago wastewater (SWW) causes pollution to the environment due to its high organic content. Annually, about 2.5 million tons of SWW is produced in Malaysia. In this study, the potential of SWW as a substrate for biohydrogen production by Enterobacter aerogenes (E. aerogenes) was evaluated. Response Surface Methodology (RSM) was employed to find the optimum conditions. From preliminary optimization, it was found that the most significant factors were yeast extract, temperature, and inoculum size. According to Face Centered Central Composite Design (FCCCD), the maximum hydrogen concentration and yield were 630.67 μmol/L and 7.42 mmol H₂/mol glucose, respectively, which is obtained from the sample supplemented with 4.8 g/L yeast extract concentration, 5% inoculum, and incubated at the temperature of 31 °C. Cumulative hydrogen production curve fitted by the modified Gompertz equation suggested that H_max, R_max, and λ from this study were 15.10 mL, 2.18 mL/h, and 9.84 h, respectively.     

Characterization and antibacterial properties of nanoboron powders and nanoboron powder coated textiles

The antibacterial properties of boron-containing compounds are well known although there are limited studies available on the pure boron nanoparticles. In this paper, nanoboron particles are characterized in terms of their particle size, shape, stability and surface charge before and after their application onto textile surfaces to study their impact on bacterial activity. It was observed that the boron nanoparticles are effective in limiting the bacterial growth of both Gram-negative and positive species without requiring any stimulation to initiate the antibacterial action. In addition to the antibacterial functionality evaluation of the free boron nanoparticles, nanoboron coated textiles were also characterized and determined to change the wettability and surface charge of the textiles with a variable antimicrobial response to the different species. Consequently, we propose pure nanoboron as a new anti-bacterial agent that can function without external stimulation.