A comprehensive review on theoretical framework‐based electric vehicle consumer adoption research

Green vehicles, such as electric vehicles (EVs), are getting noteworthy popularity among consumers worldwide. The purpose of this paper is to establish EVs as a feasible long‐term solution for the future of technology in the vehicle industry, which can decrease the current dependency on fossil fuels and also decrease greenhouse gas (GHG) emissions. As a part of long‐term benefits, the adoption of EVs gives environmentally friendly innovation to society. Despite positive environmental implications, the total number of EVs in usage is still inadequate. One of the major causes of this insubstantial adoption of EVs is largely dependent on the perceptions of consumers regarding EVs. However, this particular research study offers an inclusive outline on the existing hurdles for consumer adoption of EVs as well as a framework of the theoretical standpoints that were developed for the adoption behaviour, in addition to considering consumer intentions in the direction of EVs. In this particular study, the researcher found that the literature regarding EV adoption tried to address only the diffusion method of EVs. Whereas this study highlights consumer innovations, which provides a wide insight on consumer emotions to overlook the major aspect in consumer EVs' adoption research. The theme of this particular literature can be implemented in order to better understand the consumers' emotions and behaviour towards the adoption of EVs. The scholars further stated that there is a possible cause for more recent developments within the technological adoption part that can assist to be a standard for upcoming developments. For the last few years, knowledge regarding the problems surrounding the adoption and diffusion of EVs has gained less attention. This study expands this line of research by focusing on making a chance for developing the theoretical frameworks in terms of adding emotions in a psychological perspective where consumer behaviour and ethics are considered. Copyright © 2016 John Wiley & Sons, Ltd.     

Social media usage and organizational performance: Reflections of Malaysian social media managers

Social media usage among organizations is growing tremendously. Organizations are now building and maintaining social media public pages to improve their social network salience, enhance interest in their organizations, and build relationships with the online public. The majority of the studies on social media usage are based on the individual perspective while some are from the organizational perspective. However, not many studies have investigated the actual impact of social media usage on organizational performance. Therefore, using the qualitative approach, this study investigates the various purposes of social media usage and its impact on organizational performance. This study however, focuses only on the social media managers’ views. The senior managers of six organizations that are using social media are interviewed from which we find that social media is used for various purposes in organizations, such as advertising and promotion, branding, information search, building customer relations and many more. The results also show that social media has a greater impact on the performance of organizations in terms of enhancement in customer relations and customer service activities, improvement in information accessibility and cost reduction in terms of marketing and customer service.     

Natural Palm Olein Polyol as a Replacement for Polyether Polyols in Viscoelastic Polyurethane Foam

The impact of replacing three polyether polyols with different levels of a single palm olein‐based natural oil polyol (NOP) was systematically correlated with the changes in foaming reactivity, cell structure, physico‐mechanical properties, and morphology of viscoelastic (VE) foams. The data show that replacing the polyether polyols with the NOP slightly increased the rate of the foaming reactivity. Increasing the NOP content resulted in increased cell size and cells remained fully open. Increased NOP content contributed to higher load bearing properties of VE foam, which can be attributed to higher functionality of NOP compared to polyether polyols. Addition of the NOP slightly increased the resilience of the foams, however, the hysteresis which is the measure of energy absorption remained mostly unaffected. Age properties, characterized by dry and humid compression sets, were mostly unaffected by the replacement of the polyether polyol with the NOP. The addition of NOP did not impact the morphology of the VE foam polymer matrix, which appears to retain a low degree of hard and soft segment domain separation. Overall, the results demonstrate a feasibility that the NOP can be used to partially replace the polyether polyols in VE polyurethane foams without significant impact on the functional performance.     

Urethane‐forming reaction kinetics and catalysis of model palm olein polyols: Quantified impact of primary and secondary hydroxyls

Model palm olein natural oil polyols (NOPs) with varying ratios of primary to secondary hydroxyls were synthesized, characterized, and evaluated in reaction kinetics study with isocyanate in formation of polyurethanes. Reaction rate constants and activation energies associated with primary and secondary hydroxyls of NOPs were quantified. The kinetic study in toluene shows that the NOP containing primary hydroxyls have three times higher reaction rate constants in noncatalyzed reaction with 4,4′‐diphenylmethane diisocyanate (4,4′‐MDI) compared to the model NOP containing only secondary hydroxyls, which is associated with higher activation energy of secondary hydroxyls. However, the difference in reaction rate constants of primary and secondary hydroxyls in NOPs diminished in the reactions catalyzed with dibutyltin dilaurate. Bulk polymerization reaction confirms the kinetics results in toluene, showing that the model NOP containing primary hydroxyls reached gel time at a faster rate. Evaluation of elastomers from bulk polymerization shows low degree of phase separation of hard and soft segments for elastomers based on the model NOPs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42955.     

Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art

Russian Journal of Non-Ferrous Metals - Aluminum alloys have always been the material of choice for the aircraft industry owing to their versatile attributes, such as excellent strength to weight...     

Suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing

The stability of nano-zirconia 3YSZ powder in suspension was extensively studied by the colloidal method, and the optimum sintering temperature of the green sample fabricated through slip casting was determined. Zirconia suspensions with 10 vol% powder loading were prepared with distilled water, and HNO₃ was used to adjust the pH of the suspension to pH 1–6. All of the suspensions were subjected to sedimentation test, and the results showed that the suspensions adjusted to pH 2 had the lowest sediment volume. This finding indicates that a suspension with pH 2 produces higher packing density. Viscosity test was carried out for the suspensions added with dispersant ranging from 0.3 wt% to 0.7 wt% polyethyleneimine (PEI) with and without pH adjustment. The suspension containing 0.5 wt% PEI with pH 2 adjustment produced the lowest viscosity because of interparticle bond breakage in the aggregates, thus forming colloidally stable suspensions. The zirconia suspension containing 0.5 wt% PEI and whose pH was adjusted to pH 2 was chosen to be slip casted into cylindrical shape. Green samples were sintered at various sintering temperatures that ranged from 1100 °C to 1500 °C through a two-step sintering method. The sample sintered at 1500 °C was found to be porosite-free, and its highest relative density was 99.6% of the theoretical density. Morphological studies detected pores in the microstructure of the samples sintered at low sintering temperatures (1100 and 1200 °C). By contrast, the samples sintered at 1400 and 1500 °C were fully densified. However, the grain size of the sample sintered at 1500 °C was 230 nm, which indicated excessive grain growth. The Vickers hardness of the sample sintered at 1400 °C was found to be highest (12.9 GPa) and comparable to results found in the literature.     

Properties of Ferrite-Filled Natural Rubber Composites

Nickel zinc ferrite (Ni-ZnFe₂O₄)-filled natural rubber (NR) composite was prepared at various loading of ferrite. The tensile properties included in this study were tensile strength, tensile modulus and elongation at break. The tensile strength and elongation at break of the composites increased up to 40 parts per hundred rubber (phr) of ferrite and then decreased at higher loading whereas the tensile modulus was increased gradually with increasing of ferrite loading. Scanning electron microscopy (SEM) was used to determine the wettability of filler in rubber matrix. From the observation, the increase of filler loading reduced the wettability of the filler. Thermal stability of the composites was conducted by using a thermogravimetry analyser (TGA). The incorporation of ferrite in NR composites enhanced the thermal stability of NR composites. The swelling test results indicate that the swelling percentage of the composites decreased by increasing of ferrite loading. The initial permeability, μ_i and quality factor, Q of magnetic properties of NR composites achieved maximum value at 60 phr of ferrite loading for frequency range between 5000–40,000 kHz. The maximum impedance, Z _max of the NR composites was at the highest value at 80 phr ferrite loading for frequency range between 200–800 MHz.     

Synthesis and Characterization of Cationic Surfactants Based on N‐Hexamethylenetetramine as Active Microfouling Agents

Four cationic surfactants of quaternary hexammonium silane chloride based on hexamethylenetetramine and alkyl chloride were synthesized. The chemical structures of the prepared cationic surfactants were elucidated using Fourier transform infrared (FT‐IR) spectroscopy and mass spectrometry analysis. The surface and thermodynamic properties of the prepared surfactants were also studied. The performance of these cationic surfactants as microfouling agents against two strains of Gram‐negative bacteria, namely, Pseudomonas aeruginosa and Escherichia coli, and two strains of Gram‐positive bacteria, namely, Staphylococcus aureus and Bacillus subtilis, were evaluated as antimicrobial agents. The results showed that the maximum antimicrobial activity was detected for N‐hexamethylenetetramine‐N‐ethyl silane ammonium trichloride (Ah). The maximum and minimum antimicrobial activities were 73 and 60 % against S. aureus and E. coli, respectively, at a concentration of 5 mg/l, pH 7, and 37 °C.     

Micromorphology,pharmacognosy, and bio‐elemental analysis of an important medicinal herb: Verbascum thapsus L.

The present study was conducted on characterization of morpho‐anatomical, phytochemical, and bio‐elemental analysis of root, stem, and leaf of Verbascum thapsus. Morphologically Verbascum is a biennial plant that flowers for a month and a half in mid‐ to late summer. Various organoleptic features of root, leaf, and stem were recorded. Anatomically the T. S of the root, stem, and leaf showed a typical dicot histological differentiation. Leaf possessed anomocytic stomata, crescent shape vascular bundles, and covered with long and stellate type trichomes while, stem contained collateral type of vascular bundles and a well‐developed pith to store phytochemicals responsible for various pharmacological activities. The powder drug study through scanning electron microscopy revealed the presence of various types of tissues. Branched, tree like and stellate trichomes in root and leaf help in absorption and reduce loss of water. These anatomical features are responsible for the survival of the plant as biennial. Four macro elements (Na, K, Ca, and Mg) and seven microelements (Cr, Cu, Fe, Mn, Ni, Zn, and Cd) and their concentrations in ppm were also studied using Atomic Absorption Spectroscopy. Phytochemical screening of methanolic extract showed existence of various secondary metabolites, while mucilage and anthraquinones was not detected. The present study helps to understand the taxonomic identification of the plant based on morpho‐anatomical features and throws the attention of the researchers to carry out the work for developing its various formulations, which can ultimately be beneficial for the human beings as well as animals.     

Evaluating the lucrative role of probiotics in the aquaculture using microscopic and biochemical techniques

The present study focused to elucidate the promising role of probiotics in the fish culture, by employing microscopic and biochemical parameters to rationalize the possible outcomes. After preliminary feeding trial histopathological analysis revealed clear and visible changes in the intestinal and liver cells of CTRL (control group) compared to probiotics supplemented group, the bacterial inoculations resulted in shorten and swelled villi, while liver kupffer cells increased many folds in the CTRL. Moreover, there was clear hypertrophy and lamellar fusion in the gills tissues examined under microscope. Furthermore, intriguing results were obtained, such as a substantial increase in the weight gain, specific growth rate (%BW/day), FCE%, survival%, and improved secretions of amylase, cellulase, and protease activities. Likewise, high crude protein, fats content, while low moisture and total Ash was noticed in EXP I (Probiotics supplemented) compared to CTRL. The microscopic and biochemical analysis disclosed the positive role of probiotics on the fish health, thus we suggest its supplementations in the fish diet.