The Effect of Gradual Fluorination on the Properties of FnZnPc Thin Films and FnZnPc/C60 Bilayer Photovoltaic Cells

Motivated by the possibility of modifying energy levels of a molecule without substantially changing its band gap, the impact of gradual fluorination on the optical and structural properties of zinc phthalocyanine (F_nZnPc) thin films and the electronic characteristics of F_nZnPc/C₆₀ (n = 0, 4, 8, 16) bilayer cells is investigated. UV–vis measurements reveal similar Q‐ and B‐band absorption of F_nZnPc thin films with n = 0, 4, 8, whereas for F₁₆ZnPc a different absorption pattern is detected. A correlation between structure and electronic transport is deduced. For F₄ZnPc/C₆₀ cells, the enhanced long range order supports fill factors of 55% and an increase of the short circuit current density by 18%, compared to ZnPc/C₆₀. As a parameter being sensitive to the organic/organic interface energetics, the open circuit voltage is analyzed. An enhancement of this quantity by 27% and 50% is detected for F₄ZnPc‐ and F₈ZnPc‐based devices, respectively, and is attributed to an increase of the quasi‐Fermi level splitting at the donor/acceptor interface. In contrast, for F₁₆ZnPc/C₆₀ a decrease of the open circuit voltage is observed. Complementary photoelectron spectroscopy, external quantum efficiency, and photoluminescence measurements reveal a different working principle, which is ascribed to the particular energy level alignment at the interface of the photoactive materials.     

Black Hole Attack Prevention in Wireless Peer-to-Peer Networks: A New Strategy

Mobile peer-to-peer networking (MP2P) is a relatively new paradigm compared to other wireless network technologies. In the last 10–15 years, it has gained tremendous popularity because of its usefulness in applications such as file sharing over the Internet in a decentralized manner. Security of mobile P2P networks represents an open research topic and a main challenge regarding the vulnerability of these networks and their convenience to different security attacks such as black hole, Sybil, etc. In this work, we analyze the black hole attack in wireless P2P networks using the AODV as the routing protocol. In a black hole attack, a malicious node assumes the identity of a legitimate node, by creating forged answers with a higher sequence number, and thus forces the victim node to prioritize it as a relay node. We propose a solution based on a modification of the AODV routing protocol, taking into account the behavior of each node participating in the network. The performances of our proposal are evaluated by simulation.

     

In-house and interlaboratory validation of a method for the extraction of DNA from maize starch

Here, we describe the procedure of a DNA extraction method from maize starch including the method??s validation by in-house and interlaboratory tests. The amplifiable amount of maize DNA tested by real-time PCR was used as parameter for evaluating our method. The practical (i.e. relative) limit of detection (LOD) was used as key criterion for assessing the suitability of the extraction method with respect to genetically modified organism analysis. In a round-robin test with ten participating laboratories, satisfactory results were achieved with practical LODs in the range of 0.1?% with three native maize starch materials. In-house tests showed that this protocol??with an additional purification step??can also be applied for extracting DNA from chemically or enzymatically modified starch.     

An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy

An upflow microbial fuel cell (UMFC) system with a U-shaped cathode inside the anode chamber was developed and produced a maximum volumetric power of 29.2 W/m3 at a volumetric loading rate of 3.40 kg COD/(m3 day) and an operating temperature of 35 degrees C while feeding sucrose continuously. The Coulombic efficiency decreased from 51.0% to 10.6% with the increase in the volumetric loading rate from 0.57 to 4.29 kg COD/(m3 day). In addition, the lab-scale UMFC maintained soluble chemical oxygen demand (COD) removal efficiencies exceeding 90% and volatile fatty acid concentrations of approximately 40 mg/L, indicating efficient wastewater treatment. The analysis of impedance spectroscopy, generated by fitting experimental data into an equivalent circuit, revealed that at a volumetric loading rate of 3.40 kg COD/(m3 day) the overall internal resistance was 17.13 omega. This internal resistance was composed of electrolyte resistance (8.62 omega), charge-transfer resistance (7.05 omega), and diffusion resistance (1.46 omega). Electrolyte resistance dominated throughout the entire range of loading rates. In addition, impedance spectroscopy demonstrated that both the anodic and the cathodic charge-transfer resistances were important limiting factors. To further improve the power output of the UMFC, we must reduce the electrolyte resistance by optimizing reactor configuration, reduce the anode charge-transfer resistances by selecting superior anodic microbiota, and reduce the cathodic charge-transfer resistance by exploring sustainable and efficient catalysts.     

A non-conserved sequence in the 5'region of the CYH2 intron from Saccharomyces cerevisiae controls splicing efficiency of the pre-mRNA

The CYH2 gene from Saccharomyces cerevisiae containing one 510 bp intron is spliced inefficiently. We have shown previously that a non-conserved sequence within the intron is responsible for this low splicing efficiency. Using synthetic oligonucleotides comprising the identified region we show in this report that a very short region contains the specificity to act negatively on the splicing efficiency of the CYH2 gene. Furthermore, this sequence influences the splicing efficiency only when it is placed close to the 5' splice site of the gene. Investigations with chimeric CYH2/beta-actin genes show that this sequence acts independent from its natural surroundings. We propose that this sequence might interact with splicing factor(s).     

Validation of the performance of a GMO multiplex screening assay based on microarray detection

A new screening method for the detection and identification of GMO, based on the use of multiplex PCR followed by microarray, has been developed and is presented. The technology is based on the identification of quite ubiquitous GMO genetic target elements first amplified by PCR, followed by direct hybridisation of the amplicons on a predefined microarray (DualChip^® GMO, Eppendorf, Germany). The validation was performed within the framework of a European project (Co-Extra, contract no 007158) and in collaboration with 12 laboratories specialised in GMO detection. The present study reports the strategy and the results of an ISO complying validation of the method carried out through an inter-laboratory study. Sets of blind samples were provided consisting of DNA reference materials covering all the elements detectable by specific probes present on the array. The GMO concentrations varied from 1% down to 0.045%. In addition, a mixture of two GMO events (0.1% RRS diluted in 100% TOPAS19/2) was incorporated in the study to test the robustness of the assay in extreme conditions. Data were processed according to ISO 5725 standard. The method was evaluated with predefined performance criteria with respect to the EC CRL method acceptance criteria. The overall method performance met the acceptance criteria; in particular, the results showed that the method is suitable for the detection of the different target elements at 0.1% concentration of GMO with a 95% accuracy rate. This collaborative trial showed that the method can be considered as fit for the purpose of screening with respect to its intra- and inter-laboratory accuracy. The results demonstrated the validity of combining multiplex PCR with array detection as provided by the DualChip^® GMO (Eppendorf, Germany) for the screening of GMO. The results showed that the technology is robust, practical and suitable as a screening tool.     

Ein Beitrag zur Biosynthese amylosereicher Erbsenstärken

Contribution to the Biosynthesis of High-amylose Pea Starches Biosynthesis of starch is a complex process but few details are still unknown. This paper describes an investigation upon pea starch biosynthesis. Peas as a source of starch offer two qualities, a pea starch with 40% amylose content (smooth pea starch) and a pea starch with more than 60% amylose content (wrinkled pea starch). Samples for analysis were taken during growth. According to the quantitative determination of starch and amylose the accuracy of amylose detection was tested. Furthermore a qualitative analysis was carried out by molecular weight estimation of the starch. Both kinds of peas showed a high amylose synthesis during the last few days of growth, whereas amylopectin synthesis was highly in earlier stages. Wrinkled peas have shown only little synthesis activity of amylopectin during maturity. Therefore the amylose content of these peas was higher, instead of equal amylose synthesis quotas of both smooth and wrinkled peas.