An encoding scheme based on fractional number for querying and updating XML data

In order to facilitate the XML query processing, several labeling schemes have been proposed to directly determine the structural relationships between two arbitrary XML nodes without accessing the original XML documents. However, the existing XML labeling schemes have to re-label the pre-existing nodes or re-calculate the label values when a new node is inserted into the XML document during an update process. In this paper, we devise a novel encoding scheme based on the fractional number to encode the labels of the XML nodes. Moreover, we propose a mapping method to convert our proposed fractional number based encoding scheme to bit string based encoding scheme with the intention to minimize the label size and save the storage space. By applying our proposed bit string encoding scheme to the range-based labeling scheme and the prefix labeling scheme, the process of re-labeling the pre-existing nodes can be avoided when nodes are inserted as leaf nodes and sibling nodes without affecting the order of XML nodes. In addition, we propose an algorithm to control the increment of label size when new nodes are inserted frequently at a fix place of an XML tree. Experimental results show that our proposed bit string encoding scheme provides efficient support to the process of XML updating without sacrificing the query performance when it is applied to the range-based labeling schemes.     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Hierarchical behavior categorization using correlation based adaptive resonance theory

This paper introduces a new model for robot behavior categorization. Correlation based adaptive resonance theory (CobART) networks are integrated hierarchically in order to develop an adequate categorization, and to elicit various behaviors performed by the robot. The proposed model is developed by adding a second layer CobART network which receives first layer CobART network categories as an input, and back-propagates the matching information to the first layer networks. The first layer CobART networks categorize self-behavior data of a robot or an object in the environment while the second layer CobART network categorizes the robot's behavior with respect to its effect on the object. Experiments show that the proposed model generates reasonable categorization of behaviors being tested. Moreover, it can learn different forms of the behaviors, and it can detect the relations between them. In essence, the model has an expandable architecture and it contains reusable parts. The first layer CobART networks can be integrated with other CobART networks for another categorization task. Hence, the model presents a way to reveal all behaviors performed by the robot at the same time.     

Biodegradation of phenol by Synechocystis sp. in media including triacontanol hormone

Phenol removal levels of Synechocystis sp. were investigated in BG11 media with 10 mg/L triacontanol (TRIA) and without it to test whether the hormone could increase the removal efficiency by increasing biomass. The assays were performed to determine the effect of light on degradation, in media with 119.0–492.8 mg/L phenol under light and dark conditions. At increasing phenol concentrations, the degradation ranged between 98.5 and 100% regardless of a dark or a light condition. Experiments were carried out under light to determine the optimum pH for effective degradation. Optimum pH was found to be 6.5 at 200 mg/L phenol with or without TRIA. Phenol degradation was investigated in the 120.2–826.9 mg/L range. Although 377.4 mg/L phenol was completely degraded in hormone controls within 120 h, degradation was increased by TRIA, and the process was completed in 96 h. These data suggest that Synechocystis sp. has potential for use in the treatment of wastewaters containing phenol.     

Effects of peroxide crosslinking on the mechanical and morphological properties of poly(ethylene‐co‐vinyl acetate)/zeolite composites

Uncrosslinked and chemically crosslinked ethylene‐vinyl acetate copolymers (EVAs) with 5–25 volume percentages of zeolite were prepared in a melt‐mixing process and then compression‐molded on a hot‐press machine according to standard test specifications. The mechanical properties measured by tensile test showed a reduction in tensile strength and elongation at break with increasing zeolite content. However, an increasing trend was observed for tensile modulus with addition of zeolite. Experimental results for ultimate stress were compared with those from Pukanszky equation. The experimental data showed a good fit to the Pukanszky model. The improvement in the interfacial interaction for crosslinked composites was also confirmed by this model. Morphological changes of EVA/zeolite composites were analyzed by scanning electron microscopy (SEM). The fractured surface of the composites indicated more complex morphology at higher zeolite loading. The influence of crosslinking induced by 2 wt% of dicumyl peroxide on the properties of EVA/zeolite composites was also investigated. The crosslinked composites showed better tensile properties than the uncrosslinked ones, a result which might be an indication of enhanced interaction between the EVA and zeolite. Density measurements, gel content determinations, and Fourier transform infrared analyses were also performed to evaluate the crosslink content of the composites. The changes in the properties of chemically crosslinked EVA/zeolite composites were observed. Meanwhile, SEM micrographs of the crosslinked EVA/zeolite composites showed better interfacial strength between zeolite and the EVA matrix as compared to that of the uncrosslinked composites. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Polystyrene Containing Carbinolamine/Azomethine Potentially Useful as Antimicrobial Agent: Synthesis and Biological Evaluation

An investigation of antimicrobial properties of 12 novel modified polymer derived from the condensation reaction of (aminomethyl)polystyrene and four substitute salicylaldehyde (2-hydroxy benzaldehyde, 5-fluoro-2 hydroxy benzaldehyde, 5-fluoro-3-chloro-salicylaldehyde and 5-fluoro-3-methyl-salicylaldehyde) has been carried out and Cr(III) and Ni(II) complexes have been prepared. Modified polymers were characterized by magnetic susceptibility, elemental analyses, and spectral studies. The ¹H NMR and ¹³C NMR spectra analysis of the polymeric carbinolamine/azomethine were determined. In addition, surface morphology and composition were determined by SEM/EDX. Thermo gravimetric analyses of polymers were carried out in nitrogen atmosphere. Antibacterial activities of the polymers attached carbinolamine/azomethine and their complexes were studied by the well-diffusion method against Listeria monocytogenes 4b, Staphylococcus aureus, Escherichia coli, Salmonella typhi H, Brucella abortus, Staphylococcus epidermis sp., Micrococcus luteus, Shigella dysenteria type 10, Bacillus cereus, Pseudomonas putida and antifungal activity against Candida albicans.     

Competitiveness analysis of automotive industry in Turkey using Bayesian networks

The purpose of this study is to analyze the relations between the factors that enable national competitive advantage and the establishment of competitive superiority in automotive industry through a comprehensive analytical model. Bayesian networks (BN) are used to investigate the associations of different factors in the automotive industry which lead to competitive advantage. The results of the study focus on building a road map for the automotive sector policy makers in their way to improve the competitiveness through scenario analysis. Using the probabilistic dependency structure of the Bayesian network all of the variables in the model can be estimated. Thus, with the proposed model the automotive industry can be analyzed as a whole system and not only in terms of single variables. Findings of the model indicate that technological developments in automotive industry can alter the nature of competition in this industry.     

Synthesis and application of phenylcarbamodithioate compound for steel protection

Phenyldithiocarbamate compound has been synthesized and studied as corrosion inhibitor for steel. Dithiocarbamate (DTC) compounds with linear alkyl groups are good inhibitors, but their stability is quite low in acidic solutions. It should be noted that long-term stability is important for practical applications, in order to avoid excess use of chemicals. So, we have synthesized phenyl substituted DTC which offers strong inhibition efficiency and extra stability. This new inhibitor is chemically adsorbed on steel through its DTC group, while the aromatic ring provides extra stability and long-term efficiency. For the assessment of corrosion kinetics, we have utilized potentiodynamic and ac impedance studies; also solution assay analysis was realized with atomic absorption spectroscopy. It was revealed that inhibitor exhibits remarkably high efficiency, even under elevated temperature conditions. At 55 °C temperature conditions, i_corr value decreased from 5050 to 154 μA cm^?2, with the addition of 500 ppm inhibitor. The long-term stability of inhibitor was also tested and 85.93% efficiency was obtained after three days of exposure period for 500 ppm concentration.     

Microbial fuel cell-based sensor for Enterobacter sp. KBH6958 activity monitoring during hydrogen production: the effects of pH and glucose concentration

Journal of Applied Electrochemistry - A microbial fuel cell (MFC) is an electricity-generating device utilising electrochemically active microorganisms as biocatalysts. Using MFC as a biosensor to...