Histone Methylation Marks on Circulating Nucleosomes as Novel Blood-Based Biomarker in Colorectal Cancer

Circulating nucleic acids (CNAs) are under investigation as a liquid biopsy in cancer as potential non-invasive biomarkers, as stable structure in circulation nucleosomes could be valuable sources for detection of cancer-specific alterations in histone modifications. Our interest is in histone methylation marks with a focus on colorectal cancer, one of the leading cancers respective the incidence and mortality. Our previous work included the analysis of trimethylations of lysine 9 on histone 3 (H3K9me3) and of lysine 20 on histone 4 (H4K20me3) by chromatin immuno- precipitation-related PCR in circulating nucleosomes. Here we asked whether global immunologic measurement of histone marks in circulation could be a suitable approach to show their potential as biomarkers. In addition to H3K9me3 and H4K20me3 we also measured H3K27me3 in plasma samples from CRC patients (n = 63) and cancer free individuals (n = 40) by ELISA-based methylation assays. Our results show that of three marks, the amounts of H3K27me3 (p = 0.04) and H4K20me3 (p < 0.001) were significantly lower in CRC patients than in healthy controls. For H3K9me3 similar amounts were measured in both groups. Areas under the curve (AUC) in receiver operating characteristic (ROC) curves indicating the power of CRC detection were 0.620 for H3K27me3, 0.715 for H4K20me3 and 0.769 for the combination of both markers. In conclusion, findings of this preliminary study reveal the potential of blood-based detection of CRC by quantification of histone methylation marks and the additive effect of the marker combination.     

Fabrication of Functionally Graded SiAlON Ceramics by Tape Casting

Functionally graded SiAlON ceramics (FG-SiAlONs) were successfully prepared by the tape casting and lamination approach. Non-aqueous SiAlON slurries with five different α to β-SiAlON ratios (85α:15β, 70α:30β, 55α:45β, 40α:60β, and 25α:75β) were prepared by a 66 methyl ethyl ketone/34 ethanol (vol%) mixture. Phase and microstructure analyses incorporation with hardness measurements clearly show that the FG-SiAlONs, prepared by tape casting, exhibit a continuous and gradual change in composition and hardness. Thus, the tape casting approach is a viable method to produce FG-SiAlONs with a precisely controlled composition, and subsequently properties, as a function of position.     

Varnish layer hardness of oriental beech (fagus orientalist L.) wood as affected by impregnation and bleaching

The impacts of impregnation and bleaching on the varnish layer hardness of Oriental beech (Fagus orientalist L.) wood were investigated. A number of bleaching combinations {[NaOH−H₂O₂], [NaOH−Ca(OH)₂−H₂O₂], [NaOH−MgSO₄−H₂O₂] [NaHSO₃−H₂C₂O₄], [NaSiO₃−H₂O₂], [KMnO₄+NaHSO₃+H₂O₃]} were applied at 18% concentration for bleaching to both impregnated and unimpregnated specimens of Oriental beech wood. Subsequently, water-based (WB) varnish was coated over the samples and the varnish layer hardness values were determined in accordance with ASTM D 4366-95. All of the chemicals used for bleaching reduced the surface hardness. However, after varnish coating, the hardness of most samples was similar to that of the varnish-coated natural (control) samples.     

Surface analysis and adsorption behavior of caffeine as an environmentally friendly corrosion inhibitor at the copper/aqueous chloride solution interface

Abstract

Corrosion inhibitors based on environmentally friendly and harmless products are currently being studied and developed. The corrosion inhibition properties of caffeine (1,3,7-trimethylxanthine) on copper corrosion in aqueous chloride solution (3.5?wt.% NaCl) are analysed here using stationary and transient electrochemical methods, and a theoretical study based on density functional theory is carried out. Caffeine is a very competitive compared to the chemical inhibitors that are often used for copper protection. Electrochemical and impedance experiments reveal that the protective efficiency of caffeine reaches a value of 96% at a concentration of 10^?2?mol L^?1. Based on these results, the Langmuir model appears to be the best representation of the adsorption of caffeine onto the copper surface. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and X-ray diffraction (XRD) were used to determine the surface morphology and the chemical composition of the copper surface in chloride media, in the absence and presence of caffeine. The results show the development of a mechanism of corrosion inhibition. In order to confirm the correlation between the inhibitory effect and the molecular structure of caffeine, quantum chemical parameters are used to calculate its electronic properties.     

Self-orienting wireless multimedia sensor networks for occlusion-free viewpoints

Wireless multimedia sensor networks (WMSN) are formations of a large number of compact form-factor computing devices that can capture multimedia content, such as video and audio, and communicate them over wireless channels. The efficiency of a WMSN heavily depends on the correct orientation (i.e., view) of its individual sensory units in the field. In this paper, we study the problem of self-orientation in WMSN, that is finding the most beneficial orientation for all multimedia sensors to maximize multimedia coverage. We propose a new algorithm to determine a node’s multimedia coverage and find the sensor orientation that minimizes the negative effect of occlusions and overlapping regions in the sensing field. Our approach enables multimedia sensor nodes to compute their directional coverage leading to an efficient and self-configurable sensor orientation calculation. By using simulations, we show that the occlusion-free viewpoint approach increases the multimedia coverage significantly. The self-orientation methodology is designed in the form of a distributed algorithm, making it a suitable candidate for deployment in practical systems.     

A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

Improvements in microstructural,mechanical, and biocompatibility properties of nano-sized hydroxyapatites doped with yttrium and fluoride

Hydroxyapatite was doped with Y³⁺ (2.5, 5 and 7.5 mol%) and F⁻ (2.5 mol%) ions (2.5YFHA, 5YFHA, 7.5YFHA, respectively) to compare its structural and mechanical properties and cellular response with pure-hydroxyapatite. No second phases were observed by X-ray diffraction spectra of 2.5YFHA. Doped hydroxyapatites had F⁻ bonds in addition to OH⁻ bonds. Hydroxyapatites sintered at 900 and 1100 °C were in nano-size. 7.5YFHA sintered at 1300 °C had the highest microhardness value. 2.5YFHA sintered at 1100 °C had the highest fracture toughness value. MTT viability assays showed high cell attachments on 2.5YFHA. Cell proliferation on 2.5YFHA and 5YFHA sintered at 1100 and 1300 °C was comparable with the control after 5-day culture. The highest ALP production and calcium deposition were observed on all hydroxyapatites sintered at 1100 °C. 2.5YFHA sintered at 1100 °C can be an alternative for hydroxyapatite in orthopedic applications.     

Tensile Bond Strength of a Highly Cross-Linked Denture Tooth to the Compression-Molded and Injection-Molded Denture Base Polymers

This study compared tensile bond strengths between conventional compression-molded heat (HC)-, auto (AP)-, and microwave-polymerized (MC) poly(methyl methacrylate)-based denture resins and a relatively new injection-molded, microwave-polymerized polyurethane based resin (MI) bonded to a highly cross-linked denture tooth. In the first part of the experiments, denture teeth were used as received. In the second part, they were treated with dichloromethane to see its effect on bonding of conventional denture bases (HCS and APS). Bond strength was tested in tension according to ADA specification No.15. The results showed that the HC group failed cohesively because of higher interface bonding (49.95 MPa) compared with those of the others (AP: 25.41 MPa; MC: 22.06 MPa; MI: 20.02 MPa). The application of dichloromethane improved bond strengths of HCS and APS groups (60.61 and 32.03 MPa, respectively). It was suggested that dichloromethane could be applied on the denture teeth ridge lap area prior to denture base processing to enhance adhesion between the tooth/resin.